General stochastic user equilibrium traffic assignment problem with link capacity constraints

This paper addresses a general stochastic user equilibrium (SUE) traffic assignment problem with link capacity constraints. It first proposes a novel linearly constrained minimization model in terms of path flows and then shows that any of its local minimums satisfies the generalized SUE conditions. As the objective function of the proposed model involves path‐specific delay functions without explicit mathematical expressions, its Lagrangian dual formulation is analyzed. On the basis of the Lagrangian dual model, a convergent Lagrangian dual method with a predetermined step size sequence is developed. This solution method merely invokes a subroutine at each iteration to perform a conventional SUE traffic assignment excluding link capacity constraints. Finally, two numerical examples are used to illustrate the proposed model and solution method.     

Node modeling for congested urban road networks

First-order network flow models are coupled systems of differential equations which describe the build-up and dissipation of congestion along network road segments, known as link models. Models describing flows across network junctions, referred to as node models, play the role of the coupling between the link models and are responsible for capturing the propagation of traffic dynamics through the network. Node models are typically stated as optimization problems, so that the coupling between the link dynamics is not known explicitly. This renders network flow models analytically intractable. This paper examines the properties of node models for urban networks. Solutions to node models that are free of traffic holding, referred to as holding-free solutions, are formally defined and it is shown that flow maximization is only a sufficient condition for holding-free solutions. A simple greedy algorithm is shown to produce holding-free solutions while also respecting the invariance principle. Staging movements through nodes in a manner that prevents conflicting flows from proceeding through the nodes simultaneously is shown to simplify the node models considerably and promote unique solutions. The staging also models intersection capacities in a more realistic way by preventing unrealistically large flows when there is ample supply in the downstream and preventing artificial blocking when some of the downstream supplies are restricted.     

Genetics of traffic assignment models for strategic transport planning

This paper presents a review and classification of traffic assignment models for strategic transport planning purposes by using concepts analogous to genetics in biology. Traffic assignment models share the same theoretical framework (DNA), but differ in capability (genes). We argue that all traffic assignment models can be described by three genes. The first gene determines the spatial capability (unrestricted, capacity restrained, capacity constrained, and capacity and storage constrained) described by four spatial assumptions (shape of the fundamental diagram, capacity constraints, storage constraints, and turn flow restrictions). The second gene determines the temporal capability (static, semi-dynamic, and dynamic) described by three temporal assumptions (wave speeds, vehicle propagation speeds, and residual traffic transfer). The third gene determines the behavioural capability (all-or-nothing, one shot, and equilibrium) described by two behavioural assumptions (decision-making and travel time consideration). This classification provides a deeper understanding of the often implicit assumptions made in traffic assignment models described in the literature. It further allows for comparing different models in terms of functionality, and paves the way for developing novel traffic assignment models.     

Effects of queue spillover in networks considering simultaneous departure time and route choices

This paper explores the effects of queue spillover in transportation networks, in the context of dynamic traffic assignment. A model of spatial queue is defined to characterize dynamic traffic flow and queuing formation in network links. Network users simultaneously choose departure time and travel route to minimize the travel cost including journey time and unpunctuality penalty. Using some necessary conditions of the dynamic user equilibrium, dynamic network flows are obtained exactly on some networks with typical structure. Various effects of queue spillover are discussed based on the results of these networks, and some new paradoxes of link capacity expansion have been found as a result of such effects. Analytical and exact results in these typical networks show that ignoring queuing length may generate biased solutions, and the link storage capacity is a very important factor concerning the performance of networks.     

Eco-system optimal time-dependent flow assignment in a congested network

This research addresses the eco-system optimal dynamic traffic assignment (ESODTA) problem which aims to find system optimal eco-routing or green routing flows that minimize total vehicular emission in a congested network. We propose a generic agent-based ESODTA model and a simplified queueing model (SQM) that is able to clearly distinguish vehicles’ speed in free-flow and congested conditions for multi-scale emission analysis, and facilitates analyzing the relationship between link emission and delay. Based on the SQM, an expanded space-time network is constructed to formulate the ESODTA with constant bottleneck discharge capacities. The resulting integer linear model of the ESODTA is solved by a Lagrangian relaxation-based algorithm. For the simulation-based ESODTA, we present the column-generation-based heuristic, which requires link and path marginal emissions in the embedded time-dependent least-cost path algorithm and the gradient-projection-based descent direction method. We derive a formula of marginal emission which encompasses the marginal travel time as a special case, and develop an algorithm for evaluating path marginal emissions in a congested network. Numerical experiments are conducted to demonstrate that the proposed algorithm is able to effectively obtain coordinated route flows that minimize the system-wide vehicular emission for large-scale networks.     

Point queue models: A unified approach

In transportation and other types of facilities, various queues arise when the demands of service are higher than the supplies, and many point and fluid queue models have been proposed to study such queueing systems. However, there has been no unified approach to deriving such models, analyzing their relationships and properties, and extending them for networks. In this paper, we derive point queue models as limits of two link-based queueing model: the link transmission model and a link queue model. With two definitions for demand and supply of a point queue, we present four point queue models, four approximate models, and their discrete versions. We discuss the properties of these models, including equivalence, well-definedness, smoothness, and queue spillback, both analytically and with numerical examples. We then analytically solve Vickrey’s point queue model and stationary states in various models. We demonstrate that all existing point and fluid queue models in the literature are special cases of those derived from the link-based queueing models. Such a unified approach leads to systematic methods for studying the queueing process at a point facility and will also be helpful for studies on stochastic queues as well as networks of queues.     

Link choice proportions from trip distribution and assignment models: An overview and comparison

A number of estimation procedures have been suggested for the situation where a prior estimate of an origin-destination matrix is to be updated on the basis of recently-acquired traffic counts. These procedures assume that both the link flows and the proportionate usage of each link made by each origin-destination flow (referred to collectively as the link choice proportions) are known. This paper examines the possibility and methods for estimating the link choice proportions. Three methods are presented: (1) using ad hoc iteration between trip distribution and traffic assignment; (2) combining trip distribution and assignment in one step; (3) solving a new optimization problem in which the path flows are directly considered as variables and its optimal solution is governed by a logit type formula. The algorithms, covergencies and computational efficiencies of these methods are investigated. Results of testing the three methods on example networks are discussed.     

A dynamic stochastic assignment model for the analysis of general networks

The paper adopts the framework employed by the existing dynamic assignment models, which analyse specific network forms, and develops a methodology for analysing general networks. Traffic conditions within a link are assumed to be homogeneous, and the time varying O-D travel times and traffic flow patterns are calculated using elementary relationships from traffic flow theory and link volume conservation equations. Each individual is assumed to select a departure time and a route by trading off the travel time and schedule delay associated with each alternative. A route is considered as reasonable if it includes only links which do not take the traveller back to the origin. The set of reasonable routes is not consistant but depends on the time that an individual decides to depart from his origin. Equilibrium distributions are derived from a Markovian model which describes the evolution of travel patterns from day to day. Numerical simulation experiments are conducted to analyse the impact of different work start time flexibilities on the time dependent travel patterns. The similarity between link flows and travel times obtained from static and dynamic stochastic assignment is investigated. It is shown that in congested networks the application of static assignment results in travel times which are lower than the ones predicted by dynamic assignment.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.     

Route Choice Models Used in the Stochastic User Equilibrium Problem: A Review

Several route choice models are reviewed in the context of the stochastic user equilibrium problem. The traffic assignment problem has been extensively studied in the literature. Several models were developed focusing mainly on the solution of the link flow pattern for congested urban areas. The behavioural assumption governing route choice, which is the essential part of any traffic assignment model, received relatively much less attention. The core of any traffic assignment method is the route choice model. In the wellknown deterministic case, a simple choice model is assumed in which drivers choose their best route. The assumption of perfect knowledge of travel costs has been long considered inadequate to explain travel behaviour. Consequently, probabilistic route choice models were developed in which drivers were assumed to minimize their perceived costs given a set of routes. The objective of the paper is to review the different route choice models used to solve the traffic assignment problem. Focus is on the different model structures. The paper connects some of the route choice models proposed long ago, such as the logit and probit models, with recently developed models. It discusses several extensions to the simple logit model, as well as the choice set generation problem and the incorporation of the models in the assignment problem.     

Convergence of the Frank-Wolfe method for certain bounded variable traffic assignment problems

In two recent papers published in Transportation Research, Daganzo presented a modification of the Frank-Wolfe algorithm to solve certain link capacitated traffic assignment problems satisfying certain conditions. In order to show convergence of the modified algorithm, the assumption was made that the integral of the volume delay formula for each link tends to infinity as the link flow approaches the link capacity. In this paper we give a Theorem which establishes convergence of the modified algorithm under much weaker conditions. This result is then used to show convergence if the objective function of the assignment model is sufficiently large (not necessarily infinite) when the link flows are at capacity. Thus the modified method is applicable to a broader class of assignment problems. Two numerical examples illustrate (a) when the method converges and when it does not, and (b) that our Theorem provides a weaker condition for convergence of the method.     

A model and solution algorithm for dynamic deterministic user equilibrium assignment

Abstract

In this paper a route-based dynamic deterministic user equilibrium assignment model is presented. Some features of the linear travel time model are first investigated and then a divided linear travel time model is proposed for the estimation of link travel time: it addresses the limitations of the linear travel time model. For the application of the proposed model to general transportation networks, this paper provides thorough investigations on the computational issues in dynamic traffic assignment with many-to-many OD pairs and presents an efficient solution procedure. The numerical calculations demonstrate that the proposed model and solution algorithm produce satisfactory solutions for a network of substantial size with many-to-many OD pairs. Comparisons of assignment results are also made to show the impacts of incorporation of different link travel time models on the assignment results.     

Dynamic system-optimal traffic assignment using a state space model

We propose a new mathematical formulation for the problem of optimal traffic assignment in dynamic networks with multiple origins and destinations. This problem is motivated by route guidance issues that arise in an Intelligent Vehicle-Highway Systems (IVHS) environment. We assume that the network is subject to known time-varying demands for travel between its origins and destinations during a given time horizon. The objective is to assign the vehicles to links over time so as to minimize the total travel time experienced by all the vehicles using the network. We model the traffic network over the time horizon as a discrete-time dynamical system. The system state at each time instant is defined in a way that, without loss of optimality, avoids complete microscopic detail by grouping vehicles into platoons irrespective of origin node and time of entry to network. Moreover, the formulation contains no explicit path enumeration. The state transition function can model link travel times by either impedance functions, link outflow functions, or by a combination of both. Two versions (with different boundary conditions) of the problem of optimal traffic assignment are studied in the context of this model. These optimization problems are optimal control problems for nonlinear discrete-time dynamical systems, and thus they are amenable to algorithmic solutions based on dynamic programming. The computational challenges associated with the exact solution of these problems are discussed and some heuristics are proposed.     

Spillback congestion in dynamic traffic assignment: A macroscopic flow model with time-varying bottlenecks

In this paper, we propose a new model for the within-day Dynamic Traffic Assignment (DTA) on road networks where the simulation of queue spillovers is explicitly addressed, and a user equilibrium is expressed as a fixed-point problem in terms of arc flow temporal profiles, i.e., in the infinite dimension space of time’s functions. The model integrates spillback congestion into an existing formulation of the DTA based on continuous-time variables and implicit path enumeration, which is capable of explicitly representing the formation and dispersion of vehicle queues on road links, but allows them to exceed the arc length. The propagation of congestion among adjacent arcs will be achieved through the introduction of time-varying exit and entry capacities that limit the inflow on downstream arcs in such a way that their storage capacities are never exceeded. Determining the temporal profile of these capacity constraints requires solving a system of spatially non-separable macroscopic flow models on the supply side of the DTA based on the theory of kinematic waves, which describe the dynamic of the spillback phenomenon and yield consistent network performances for given arc flows. We also devise a numerical solution algorithm of the proposed continuous-time formulation allowing for “long time intervals” of several minutes, and give an empirical evidence of its convergence. Finally, we carry out a thorough experimentation in order to estimate the relevance of spillback modeling in the context of the DTA, compare the proposed model in terms of effectiveness with the Cell Transmission Model, and assess the efficiency of the proposed algorithm and its applicability to real instances with large networks.     

Discretised link travel time models based on cumulative flows: Formulations and properties

In the research area of dynamic traffic assignment, link travel times can be derived from link cumulative inflow and outflow curves which are generated by dynamic network loading. In this paper, the profiles of cumulative flows are piecewise linearized. Both the step function (SF) and linear interpolation (LI) are used to approximate cumulative flows over time. New formulations of the SF-type and LI-type link travel time models are developed. We prove that these two types of link travel time models ensure first-in-first-out (FIFO) and continuity of travel times with respect to flows, and have other desirable properties. Since the LI-type link travel time model does not satisfy the causality property, a modified LI-type (MLI-type) link travel time model is proposed in this paper. We prove that the MLI-type link travel time model ensures causality, strong FIFO and travel time continuity, and that the MLI-type link travel time function is strictly monotone under the condition that the travel time of each vehicle on a link is greater than the free flow travel time on that link. Numerical examples are set up to illustrate the properties and accuracy of the three models.     

A dynamic network loading process with explicit delay modelling

In this paper, a neural network (NN) approximator, integrated to a dynamic network loading (DNL) process, is utilized to model delays and to solve the DNL problem at an unsignalized highway node. First, a dynamic node model (DNM) is set out to compute the time-varying traffic flows conflicting at the node. The presented DNM has two components: a link model set with a linear travel time function and an algorithm written with a set of node rules considering the constraints of conservation, flow splitting rates and non-negativity. Each of the selected NN methods, feed-forward back-propagation NN, radial basis function NN, and generalized regression NN, are utilized one by one in the NN approximator that is integrated with the proposed DNM, and, hence, three DNL processes are simulated. Delays forming as a result of capacity constraint and flow conflicting at the node are calculated with selected NN configurations after calibrating the NN component with conical delay function formulation. The results of the model structure, run solely with the conventional delay function, are then compared to evaluate the performance of the models supported with NNs relatively.     

Mesoscopic simulation of a dynamic link loading process

Passing from path flows to link flows requires non-linear and complex flow propagation models known as network loading models. In specific technical literature, different approaches have been used to study Dynamic Network Loading models, depending on whether the link performances are expressed in an aggregate or disaggregate way, and how vehicles are traced. When vehicle movements are traced implicitly and link performances are expressed in an aggregate way, the approach is macroscopic. When vehicle movements are traced explicitly, two cases are possible, depending on whether link performances are expressed in a disaggregate or aggregate way. In the first case, the approach is microscopic, otherwise it is mesoscopic.In this paper, a mesoscopic Dynamic Network Loading model is considered, based on discrete packets and taking into account the vehicle acceleration and deceleration. A simulation was carried out, first using theoretical input data to simulate over-saturation condition, and then real data to validate the model. The results show that the model appears realistic in the representation of outflow dynamics and is quite easy to calculate. It is worth noting that network loading models are usually used downstream of the assignment models from which they take path flows to calculate link flows. In the above mentioned simulation, we assumed that a generic assignment model provides sinusoidal path flow.     

A capacity related reliability for transportation networks

A capacity related reliability for transportation networks with random link capacity is introduced. It is defined as the probability that the road network can accommodate a certain level of traffic demand, and is built on the concept of network reserve capacity. Network reserve capacity is defined as the largest multiplier applied to an existing origin-destination demand matrix that can be allocated to a transportation network in a user-optimal way without violating the link capacities. Due to large variability associated with link capacities, a probabilistic approach is adopted to model the different physical and operational factors that often degrade the capacity of roadways. A Monte Carlo simulation procedure is developed to estimate the capacity related reliability measure. Numerical results are provided to demonstrate the feasibility of the approach.     

The problem of cyclic flows in traffic assignment

A fundamental property of traffic assignment is that cyclic flows from a common origin or to a common destination cannot exist in an equilibrium solution. However, cyclic flows can easily be created by the Frank-Wolfe (F-W) assignment procedure, especially during its first several iterations. The PARTAN technique—a more rapidly converging derivative of the F-W method—can also create cyclic flows during its procedure. We show in this paper that once cyclic flows become part of a combined assignment, they are difficult to correct, thus presenting one impediment to convergence. We then present modifications to the F-W and PARTAN procedures that prevent cyclic flows from being created between adjacent pairs of nodes. The avoidance of cyclic flows in test problems is shown to accelerate the convergence of both the F-W and PARTAN techniques, particularly in the first several iterations. While the impossibility of cyclic flows in a true equilibrium solution is an important property of traffic assignment, this paper shows that (1) the F-W and PARTAN procedures eventually reduce cyclic flows to zero if they occur, (2) avoiding cyclic flows can be most helpful in the early iterations of these procedures, and (3) avoiding cyclic flows in large networks is very difficult because of large computational requirements.     

Traffic Performance Models for Dynamic Traffic Assignment: An Assessment of Existing Models

Abstract

This paper provides a review of the traffic performance models for dynamic traffic assignment (DTA) and it identifies the strength and weakness of existing models. Requirements for traffic performance models are identified and various forms of existing traffic performance models for DTA are reviewed and analysed according to the requirements. Non‐linear travel time models are shown to have some deficiencies that make them unsuitable for the analysis of time‐varying transportation networks. Even though linear‐type travel time models are identified as good candidates for the analysis of dynamic transportation networks, they have limitations from the practical point of view that travel time increases only linearly with the amount of traffic on the link. This poses a dilemma and it seems to be one whose resolution is an imminent precondition for DTA modelling to progress in a way that is both theoretically coherent and plausible in practical terms.