共查询到20条相似文献,搜索用时 181 毫秒
1.
2.
文章根据GB/T 19233-2020油耗测试标准,针对国六滑行阻力定义及其相对国五滑行阻力的不同,进行了试验条件、受力分析和计算方法对比,发现同等试验条件下,国六滑行阻力是国五的1.03倍。通过转毂滚动阻力修正、轮胎滚动阻力参数修正和温度修正,总结出国六滑行阻力的替代算法公式。对3辆样车进行替代算法与滑行法测试对比,偏差控制在最大9.8 N/1.2%以内,平均车速80 km/h时在5.8 N/1.4%以内。通过国六WLTC循环试验验证,循环能量差在0.017以内,证明了设备组合有效。该替代算法作为滑行法的补充,能够更好地满足日益多元化、灵活性的油耗申报需求。 相似文献
3.
4.
5.
6.
7.
8.
9.
针对道路滑行试验方法下汽车道路行驶阻力系数的准确获取问题,提出基于时间法开展空挡下道路滑行试验研究汽车道路行驶阻力。阐述了试验车辆依据时间法在道路上开展滑行试验及获取试验数据的方法,并利用最小二乘法曲线拟合的方法对试验数据进行处理,从而计算出空气阻力系数和滚动阻力系数。结果显示,滑行时间法测定的道路行驶阻力更能真实反映车辆道路行驶实际情况,具有较好的实用性。 相似文献
10.
11.
全尺寸汽车空气动力学风洞是汽车空气动力性能重要的研究平台与开发工具。但风洞间测试结果普遍存在差异,这对气动性能的研究与分析造成了一定的困难,因此有必要开展风洞间的横向相关性和修正研究,提高风洞测试结果的统一性和一致性。分别对德国和中国的两座全尺寸汽车风洞进行实车风洞测试,开展风洞相关性及修正研究。研究表明,对于同一工况,不同风洞间的测试结果存在一定差异,但不同工况与基础工况间差异变化趋势一致,大小相似,不同风洞间的测试结果能建立较好的相关关系,形成相关性线性函数。通过空气阻力系数C D 修正方法,可以减小风洞间由结构尺寸、流场参数导致的系统性误差,修正后的风洞间空气阻力系数C D 测试结果差异降低了近60%。 相似文献
12.
13.
In the connected vehicles, connecting interfaces bring threats to the vehicles and they can be hacked to impact the vehicles and drivers. Compared with traditional vehicles, connected vehicles require more information transfer. Sensor signals and critical data must be protected to ensure the cyber security of connected vehicles. The communications among ECUs, sensors, and gateways are connected by in-vehicle networks. This paper discussed the state-of-art techniques about secure communication for in-vehicle networks. First, the related concepts in automotive secure communication have been provided. Then we have compared and contrasted existing approaches for secure communication. We have analyzed the advantages/disadvantages of MAC and digital signatures for message authentication and compared the performance and limitations of different cryptographic algorithms. Firewall and intrusion detection system are introduced to protect the networks. The constraints and features of different intrusion detection approaches are presented. After that, the technical requirements for cryptographic mechanism and intrusion detection policy are concluded. Based on the review of current researches, the future development directions of the automotive network security have been discussed. The purpose of this paper is to review current techniques on automotive secure communication and suggest suitable secure approaches to implement on the in-vehicle networks. 相似文献
14.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(9):803-829
In this paper, we examine the lateral dynamics emulation capabilities of an automotive vehicle equipped with four-wheel steering. We first demonstrate that the lateral dynamics of a wide range of vehicles can be emulated, either with little or with no modification on the test vehicle. Then we discuss a sliding mode controller for active front and rear wheel steering, in order to track some given yaw rate and side-slip angle. Analytically, it is shown that the proposed controller is robust to plant parameter variations by±10%, and is invariant to unmeasurable wind disturbance. The performance of the sliding mode controller is evaluated via computer simulations to verify its robustness to vehicle parameter variations and delay in the loop, and its insensitivity to wind disturbance. Finally, the emulation of a bus, a van, and two commercially available passenger vehicles is demonstrated in an advanced nonlinear simulator. 相似文献
15.
16.
17.
探讨了通过转鼓滑行来确定同系列车型行驶阻力的应用原理及方法,并通过实例来加以验证,最后对该方法在实际应用时的试验程序进行了总结。 相似文献
18.
高海拔地区隧道施工通风风量计算及风机选型研究 总被引:2,自引:0,他引:2
高原地区由于海拔高度的增大,空气性质及部分有害气体毒性较平原地区发生了较大变化,施工通风难度比常压下增大很多,不能以平原地区的通风技术进行简单照搬。对海拔高度与空气性质的关系,高原隧道施工通风需风量计算,高原地区通〖JP2〗风阻力变化及风机选型进行了分析。结果表明,高原地区的施工通风风量计算应考虑不同海拔高度时有害气体的体积膨胀及浓度限值,进行风机选型与通风阻力计算时应根据高原空气密度与平原地区空气密度的比值进行修正,该结论可为高原隧道施工提供借鉴和参考。 相似文献
19.
新能源汽车的出现对于当前汽车领域的发展而言,掀起了新的篇章,也能够为汽车领域的创新和发展拓展新的空间。在这样的状况之下,必然更需要大量的专业性人才。不仅需要更多的汽车设计人员,同时也需要汽车维修人员。因此,对中职院校汽车专业教学活动的开展提出了更高的要求,在本次研究当中,主要针对中职汽车新能源教学中创新教育的途径进行详细的分析论述。文章从阐述中职汽车新能源教学创新开展必要性的角度着手,对中职汽车新能源教学创新教育实际开展的具体策略和途径进行了深入的探讨,希望文章研究的内容能够促进中职院校汽车专业新能源汽车教学进行革新与创新。 相似文献
20.
本文讨论制造误差对汽车结构动态特性的影响。由于制造误差,我们把汽车结构参数作为随机参数,利用随机参数结构的随机特征值分析理论来估计制造误差对汽车结构动态特性的影响。这个方法也可用于估计有限元分析和汽车结构动力学设计的可靠性。为了说明该理论的应用,本文以某汽车车架为例,作了分析计算,并得到了一些重要结果。 相似文献