共查询到20条相似文献,搜索用时 78 毫秒
1.
从实际问题出发,分析推轮在系统状态下的推力与功率的关系,得出推力与功率的关系可以类似船舶自航状态的推进效率的划分方法进行分解的结论,利用此结论可以优化推轮的模型试验。 相似文献
2.
3.
4.
可调螺距侧向推进器推力测量方法 总被引:1,自引:0,他引:1
通过工程常用的两种经验方法估算某型船用可调螺距侧推的系泊最大推力,同时建立侧向推进器敞水试验模型,通过试验方法获得系泊状态不同螺距下的水动力敞水性能,对实尺度不同螺距情况下的侧向推进器推力和收到功率进行预报,从而得出系泊状态的最大推力。文章定义了船用侧推装置的"标准槽道"和侧推装置的"名义推力",并对上述三种推力结果进行对比与说明。 相似文献
5.
6.
本文介绍了作者借助电子计算机对长江下游分节顶推船队所作的大规模技术经济论证。在论证中,以综合经济指标 E 评定船队方案经济效果的优劣,对于船队阻力的计算采用作者提出的方法。通过推轮功率与船员工资、驳船队、油价等最佳匹配的函数关系式和大量的实例计算资料,分析了运输成本结构对分节顶推船队经济性的影响;阐明了船队运输成本结构是确定推轮功率和驳船队大小的决定性因素之一。经对两万余个方案的论证计算与分析,根据长江下游目前的、以至可以预见的相当长时间内的分节顶推船队运输成本结构和年运量,作者认为长江下游在近期内以发展2000吨分节驳型、1200~1800马力推轮所组成的2×4船队及以2000吨分节驳型和540~1200马力推轮所组成的2×2船队具有最好的经济效果。 相似文献
7.
对多瑙河改型推轮提高顶推船队的经济性作了阐述。改型推轮尺度小、主机功率小、船艉后安装可回转的螺旋桨,消除了原有推轮的螺旋桨负荷较高,全部轴隧和螺旋桨前后多个主舵和倒车舵等不利影响,从而提高推轮的推进效率。 相似文献
8.
纯横移运动是一种特殊的操纵性指标,它可以判断船舶主推进器和侧推器的配合能否抵御环境影响。好的横移能力能降低船舶进出港口的时间,提高船舶停靠码头的作业效率。船厂需要在设计初期通过此指标判断和选定满足要求的侧推器功率。本文基于MMG建模方法建立风载荷下客滚船的纯横移运动数学模型,采用各推进器推力的百分比之和最大的方式进行推力配比,并依据测量高度对风速进行修正。与文献中的某客滚船的模型试验结果的对比验证较为吻合,证明了计算的有效性。最后对3艘客滚船进行了验证和预报,给出了合同设计阶段需满足纯横移运动指标的侧推器功率。 相似文献
9.
10.
分析了连续刚构桥合龙段施工中实施顶推的作用,推导了顶推力与墩顶相对位移关系的解析公式,结合某连续刚构桥工程实例,讨论了连续刚构桥合龙施工中顶推力大小的计算及施工中的控制技术要点。 相似文献
11.
介绍了我国港口资源的整合现状,指出港口整合可以提升港口的形象和地位,也为区域经济和城市的发展注入强大的动力。最后指出在港口资源整合中要避免的几个问题。 相似文献
12.
13.
广州集装箱码头的轮胎式场桥小车制动器使用10多年后,出现了许多问题,故进行了改造.分析了轮胎式集装箱龙门起重机小车制动器的主要故障现象,提出了改造方案,并加以实施. 相似文献
14.
本文对现有的选定球面轴承的三种工程方法进行了分析比较.引入了“合力系数”,并给出了合力方向上投影面积的精确解. 相似文献
15.
16.
17.
18.
分析柴油机故障中常见的机体裂纹故障原因,认为由于设计缺陷和管理及操作不当,易造成船舶柴油机缸体上的裂纹多发生在气缸套凸肩处。如不及时处理这些裂纹和故障,就会造成缸套的裂纹直至出现缸套漏水等严重后果,针对NANTAIQUEEN轮柴油机对该类型故障的检修提出具体措施。 相似文献
19.
The hydrophysical and hydrochemical structure of the Sea of Azov, with developed bottom anoxia, was studied during the RV “Akvanavt” cruise from July 31 to August 03, 2001. The anoxic zone with a thickness from 0.5 to 4 m above the bottom was found in all deep regions of the Sea. Concentrations of hydrochemical parameters were similar to the pronounced anoxic conditions (about 90 mmol m− 3 of hydrogen sulfide, 17 mmol m− 3 of ammonia, 6 mmol m− 3 of phosphate, 7 mmol m− 3 of total manganese). The hydrophysical structure was characterized by the uniform distribution of temperature in the upper 6–7 m mixed layer (UML). Below this a thin (0.4–0.8 m) thermocline layer was observed, just above the anoxic waters. Formation of this phenomenon was connected with that summer weather conditions. Intensive rains led to increased influx of river waters in June. That resulted in large input of allochtonous organic matter (OM) and inorganic nutrients; the latter were consumed on the additional autochthonous organic matter production. In July the weather was characterized by a significant rise in the daily averaged air temperature and large oscillations of temperature during the day. In this period a wind of constant direction was absent, but wind bursts were observed. The completed analyses showed that the formation of such a structure could be connected with the following factors: (i) positive growth trends of the daily averaged temperature and the daily oscillations of temperature, (ii) presence of wind bursts. The joint action of these factors resulted in the formation of the UML. The amplitude of wind bursts determined the depth of UML, and the value of trend determined the value of the temperature change in the thermocline. An initial presence of bottom halocline (caused by the Black Sea water influx to the bottom of the Sea of Azov) prevented the heating of the bottom layer and therefore led to an increase of vertical gradient of temperature in the thermocline. The spatial distribution of the turbulent exchange coefficient confirmed the existence of a “stagnation” area located above the anoxia zone, which is also, apparently, the reason for its occurrence. 相似文献
20.