Spectral Wave Modeling in Very Shallow Water at Southern Coast of Caspian Sea

This study evaluates the capability of the Simulating WAves Nearshore (SWAN) wave model (version 41.01) in predicting significant wave height and spectral peak energy content for swell waves in very shallow water of surf zone during depth-induced wave breaking and dissipation. The model results were compared with field measurements at five nearshore stations. The results demonstrated that some breaker index formulations were successful for significant wave height prediction in surf zones. However, an incorrect shape of the energy spectrum and overestimated near spectral peak energy content at shallow water stations were obtained using all of the embedded depth-induced wave breaking formulations in SWAN. The dependent breaker index on relative depth (K_pd) formulation, which was successful in predicting near spectral peak energy content, resulted in an average error of 30%. Finally, this formulation was modified to enhance the model performance in reproducing the spectral peak energy content.     

Prediction of wave parameters by using fuzzy inference system and the parametric models along the south coasts of the Black Sea

Forecasting of sea-state characteristics has a great importance in coastal and ocean engineering studies. Therefore, the purpose of this study was to investigate performances of Adaptive-Network-Based Fuzzy Inference System (ANFIS) and several parametric methods in the Black Sea. For this purpose, different fuzzy models with different input combinations were developed for two different wind data sources (TSMS and ECMWF) at two offshore buoy stations. It also aimed to apply several approaches to event-based data sets for wave predictions. Generally, in literature the tendency is to use time series data for wave predictions. In this kind of prediction approach, lagged time series data are taken as inputs and current or future variables are taken as output. In this study, event-based data for each independent storm were extracted from time series data. Simultaneous or concurrent data of wind speed, blowing duration, fetch length and wave characteristics were detected for each single storm. These event data were then used to set up models. The hindcast results were validated with significant wave height and mean wave period data recorded in Hopa and Sinop buoy stations. The performance of developed fuzzy models were also compared with that of four different parametric methods (Wilson, SPM, Jonswap, and CEM methods) applied for two wind data sources at both buoy stations. Finally, it was determined that in the prediction of both wave parameters (H _s and T _z) the ANFIS models (R = 0.66, squared correlation coefficient, and MAE = 0.37 m, mean absolute error, for the best model in prediction of H _s) were more accurate than the parametric methods (R = 0.63 and MAE = 0.75 m for the best model in prediction of H _s).     

钢管桩码头地震易损性分析的单自由度模型

结构地震易损性分析的关键是确定结构在不同地震动强度下的反应值。由于需要考虑地震动的不确定性,须对大量地震动记录进行统计分析,特别是直接对码头结构进行抗震分析的情况下,计算量很大。为降低钢管桩码头易损性分析的复杂程度,提出一种可用于码头易损性分析的单自由度模型,该模型采用曲线型骨架线和Masing准则模拟钢管桩码头的恢复力特性。为验证该模型的合理性和有效性,将一个钢管桩码头结构等效为单自由度模型,并基于云图法分别对原型结构和单自由度模型进行了易损性分析,结果表明二者的易损性曲线吻合良好。     

导管架平台拆除安全性分析

随着海洋石油工业的迅猛发展,废弃海洋平台的拆除问题已成为海洋工程界的研究热点,并得到世界各国该领域的广泛关注．在废弃导管架平台拆除过程中,保证其安全性是非常重要的．本文提出了用于分析导管架平台拆除安全性的危险指标Do和Ds,通过对Do和Ds的各列数据进行比较或对Do和Ds的各行数据做出折线图,可以很容易的得出最安全的桩基切割顺序。     

Simulation of the mean zero-up-crossing wave period using artificial neural networks trained with a simulated annealing algorithm

The aim of this work was to develop a predictive model to forecast the mean zero-up-crossing wave periods (T _z ) for 3-hourly sea states at a location in the Pacific using artificial neural networks (ANNs). Seven multilayer ANNs were trained with a simulated annealing algorithm. The output of each trained ANN was used to estimate each of the seven parameters of a new distribution called the hepta-parameter spline proposed for the conditional distribution of T _z , given some mean zero-up-crossing wave periods and significant wave heights. After estimating the parameters of the distribution, the model was used to simulate and predict future values of T _z . Forecasting a sea state and developing the joint distribution of sea state characteristics with the help of the simulated characteristics are also discussed in this article.     

海上风电技术特性对比分析

从海上风能开发利用的技术包括所涉及风电场建设(机组排列、安装及运输、运行监控等)、风电机组设计、并网(海上高压系统、海底电缆、岸上接入设施等)等方面,对比分析海上风电与陆上风电的技术差异,结果表明海上风电在基础安装、运营维护等方面较陆上风电要求更高、难度更大。为进一步发展海上风电提供了参考。     

Capacity and failure mechanism of monopile-wheel hybrid foundation in clay-overlaying-sand deposits under combined V–H-M loadings

Innovative monopile-wheel hybrid foundations are proposed to enhance the lateral load and moment capacities of monopile for offshore wind systems. This paper presents a comprehensive numerical study on the bearing capacities of this hybrid foundation in clay-overlaying-sand soil conditions under combined V–H-M (vertical-horizontal-moment) loadings. Numerical models are generated and validated by comparing with laboratory experiment results and available centrifuge testing data on similar foundation systems. Parametric analysis is then carried out to quantify the effects of potential influencing factors on the failure mechanisms and bearing capacities of hybrid foundations, including the hybrid foundation geometry, soil properties, upper clay thickness, height of the lateral loading and pre-vertical load. It is found that in clay-overlaying-sand deposits, the hybrid system manifests totally different failure mechanism compared with that in uniform soil deposits. The thickness of the upper clay layer (T_c/L), within the practical range of T_c/L = 0.1–0.7, has a significant influence on the failure patterns and the bearing capacities of the hybrid system, and the proportion of bearing capacity provided by the pile and wheel is determined by the ratios of D_w/L and L/D_p. In addition, the failure envelopes in the V–H-M space manifests that the failure envelopes are shrank with the increase of the normalized vertical resistance, V/V_ult, which is highly related to the clay layer thickness (T_c/L).     

The ultimate strength of doubler plate reinforced Y-joints under compression loading

It is common practice in the offshore industry to solve the punching shear problem due to compression by using doubler plate. The finite-element method is a useful tool for studying this problem. The aim of this paper is to study the static strength of doubler plate reinforced Y-joints subjected to compression loading. The finite-element method is adopted in numerical parametric studies. The individual influences of the geometric parameters βand τd （ doubler plate to chord wall thickness ratio） and ld/d1 （ dubler plate length to brace diameter ratio） on the ultimate strength are made clear. The results show the size of plate may have important effects on the strength of reinforced joints. It is found that the ultimate strength of Y-joints reinforced with appropriately proportioned doubler plates can be greatly improved nearly up tothree times to un-reinforced Y-joints.     

迎浪规则波中波浪增阻和船体垂向运动的数值预报(英文)

The numerical prediction of added resistance and vertical ship motions of one ITTC (International Towing Tank Conference) S-175 containership in regular head waves by our own in-house unsteady RANS solver naoe-FOAM-SL JTU is presented in this paper. The development of the solver naoe-FOAM-SJTU is based on the open source CFD tool, OpenFOAM. Numerical analysis is focused on the added resistance and vertical ship motions (heave and pitch motions) with four very different wavelengths (0.8Lpp≤λ≤1.5Lpp) in regular head waves. Once the wavelength is near the length of the ship model, the responses of the resistance and ship motions become strongly influenced by nonlinear factors, as a result difficulties within simulations occur. In the paper, a comparison of the experimental results and the nonlinear strip theory was reviewed and based on the findings, the RANS simulations by the solver naoe-FOAM-SJTU were considered competent with the prediction of added resistance and vertical ship motions in a wide range of wave lengths.     

箱形浮体在波浪上运动的特性计算方法及其应用

为了研究箱形浮体在波浪上运动的计算方法，工程界提出了一种称为修正切片法的计算方法，这是在引入三维修正以及引用试验结果的基础上发展起来的方法，具有计算快，能达到工程计算精度要求的优点。该方法采用了纵切片以及常规的横切片法，可以进行六个自由度的运动计算，并改进了横摇旋涡阻尼的计算方法，计入了三维及浅水影响。本文对此方法进行了探讨，并作了实例计算分析，认为此法采用纵横切片的思想，配合经验性的修正，既保持了传统切片理论简单易算的优点，又能达到工程计算精度的要求。尽管在理论上这一思想不很严密,但计算结果已足以在工程上的应用。箱形浮体受不规则海浪扰动而产生的运动通常可以作为平稳的线性随机过程进行处理，本文采用谱分析的方法对箱形浮体的海上运动及加速度的统计特性进行了预报。     

Dynamic responses analysis of a 5 MW spar-type floating wind turbine under accidental ship-impact scenario

Ship impact against offshore floating wind turbine (OFWT) has been identified as one of the major hazards with the development of OFWTs. The dynamic responses of OFWTs under ship impact should be taken into consideration during the design phase. This paper addresses a study on the dynamic responses of an OFWT in ship collision scenarios. Firstly, a mathematical model for external mechanism of ship-OFWT collision scenario is developed. Secondly, this model is combined with an in-house programme, DARwind, which can be used to predict nonlinear dynamic responses of whole OFWT system in time-domain. With the newly combined analysis tool, simulation cases for different scenarios are conducted to investigate the nonlinear dynamic responses of OFWT system, including the cases of still water condition, wave-only condition and wind-wave condition. It is shown that in still water condition, the ship impact will more obviously change the responses of motions and mooring system, compared with those in wave and wave-wind conditions. In the wave-only condition, these motions responses of platform are suppressed by wave effect, but the tower vibration and tower top deformation are sensitive to ship collision. For the wave-wind combined condition, the motions increment in surge and pitch due to ship collision becomes smaller than that of wave-only condition, but yaw motion has a considerable variation compared with those of the other two conditions. Additionally, the blade tip deformation increment due to ship collision are analyzed and it is found that the edgewise tip deformation got more obvious increment than that of flapwise. To further asses the safety of OFWT, the acceleration at nacelle are analyzed because some equipment might be sensitive to acceleration. The analysis results indicate that even though the OFWT structure doesn't get critical damage by ship impact, the equipment inside may still fail to work due to the high value of acceleration induced by ship impact. The research outcomes can benefit the safety design of OFWT in the engineering practice.     

Prediction of seasonal maximum wave height for unevenly spaced time series by Black Widow Optimization algorithm

The present study aimed to predict the maximum seasonal wave height by new integrative data driven methods. For this purpose, two data-driven techniques, that are, the Adaptive Neuro-Fuzzy Inference System (ANFIS) and the Support Vector Regression (SVR), were applied, and a BWO algorithm was used as an integrated method (ANFIS-BWO and SVR-BWO). In addition, the Particle Swarm Optimization (PSO) algorithm was used as a method integrated with SVR and ANFIS (SVR-PSO and ANFIS-PSO) to compare the performance of the newly developed methods (ANFIS-BWO and SVR-BWO). The wave data were collected in different seasons by a buoy station deployed in the southern Baltic Sea by the Institute of Hydro-Engineering of the Polish Academy of Sciences. Seasonal simulations were performed to investigate the effect of seasons on the maximum wave height. The wave data constituted an unevenly spaced time series. The maximum wave height was modeled using the maximum wave height period (T_max), the significant wave height (H_s), the significant wave period (T_s), and time steps (Δt). The results showed that the application of BWO and PSO algorithms increased the accuracy of ANFIS and SVR by about 18.45%. Moreover, the results show that PSO increased the accuracy of ANFIS and SVR by about 17.98% and 21.59%, respectively. The results of different runs indicated that the BWO is more stable to reach the global solution than PSO. The results also show that show that SVR-BWO is the most accurate model.     

Experimental investigation on scour development and scour protection for offshore converter platform

Local scour around the offshore converter platform caused by current and wave will lead to the instability of foundation. A series of experiments are performed to investigate the scour development and scour protection of the offshore converter platform. The development and evolution characteristics of the local scour around the gravity based structure foundation under the actions of current flow and wave are analyzed. The results show that the edge scour mainly occurs at the lateral sides of the platform and the scour pits are symmetrical about the centerline of the platform in the streamwise flow direction. The scour depth around the gravity based structure increases with the increase of flow velocity. The inclination and collapse of the platform is observed at α = 90° and U₀ = 0.25 m/s. The sand ripples are observed around the gravity based structure under the wave action, and the scour depth increases with the increase of wave height and wave period. Based on the comparisons of different scour protection methods, the combined bionic grass-geotextile-riprap protection has the best scour protection efficiency for the offshore converter platform.     

Joint earthquake and wave action on the monopile wind turbine foundation: An experimental study

Offshore wind turbines in regions of active seismicity are under a potential threat caused by the joint earthquake and ocean wave action. Taking NREL-5MW monopile wind turbine as the prototype, this study is devoted to probe the joint action of strong earthquakes and moderate sea conditions. A series of shake table model tests of scale 30:1 have been carried out by the contemporary world unique facility (Earthquake, Wave and Current Joint Simulation System) to investigate the structural response in dry flume, low and high calm water levels, with and without regular or random waves. Particular interest has been in the nacelle acceleration subjected to strong ground motions as well as to random waves. The experimental results of nacelle peak accelerations and corresponding dynamic amplification factors show that the joint earthquake and wave action is important for the proper evaluation of structural response. Ignoring the effect of wave action in seismic analysis will lead to underestimation of structural response, especially when the monopile foundation is dynamically sensitive. The coupling of earthquake and wave actions is sourced not only from the relative velocity of vibration but also from the initial condition induced by waves. It has been also derived that the peak acceleration excited by a moderate sea condition is comparable to that by a moderate earthquake.     

Experimental study on dynamic response of a floating offshore wind turbine under various freak wave profiles

This study performed experimental investigation on the dynamic response of an in-place floating offshore wind turbine (FOWT) under freak wave actions. Based on the method of wave profile modulation, various freak wave profiles embedded in unidirectional Gaussian seas were generated in wave basin and the action of these waves on the FOWT was measured and analyzed, which has not been done before. The motions of FOWT were analyzed in time domain as well as time-frequency domain. The effect of freak wave parameters on FOWT motions was addressed, i.e., freak wave height, freak wave period, large crest, and deep trough. The dynamic response of FOWT was observed as a spike at the occurrence of freak wave in a conventional random wave, where the impact of freak wave can last for 17 spectral peak periods of wave. Data analysis shows that the motions of FOWT increased linearly with the freak wave height. In addition, the occurrence of freak wave induced the coupled effect on surge and pith, which was strengthen with the increase of freak wave height and wave period. Compared to a large crest, a deep trough of freak wave led to stronger motions and was supposed to be a key concern on the safety of the FOWT. The novel findings in this study provided a reference for the design of survival load on a FOWT and benchmarks for validating numerical models.     

东海涌浪环境下大型起重船吊装组块耦合运动响应数值模拟研究

我国东海海洋环境复杂,经常出现小波高、长周期的涌浪.长周期涌对系泊大型起重船吊装海洋平台上部组块影响比较大,尽管涌的波高较小,但是,吊物组块运动幅度明显比同等波高海况时的要大,严重影响了海洋平台的安装施工效率和进度,甚至威胁作业安全.本文采用水动力势流软件,建立系泊-大型起重船(包括吊臂)-索具-大型组块吊物的耦合运动模型,研究复杂涌浪环境下耦合系统运动响应特性及其机理,并开展了参数敏感性分析,讨论对耦合响应影响因素.最后,对东海涌浪情况下起重安装施工,提出了降低吊装组块运动响应的建议措施.     

Editorial prologue

Abstract

The economic and environmental consequences of a proposed Louisiana superport have been studied by researchers during the last three years. These studies provided technical information and management alternatives. Management alternatives included state control to avoid multiple superport developments, details for an Environmental Protection Plan, comparisons of onshore and offshore sites, and planning for ancillary development. Policy decisions which resulted include many of the recommendations of the research. It is suggested that environmental research can influence policy decisions and limit the options available to a decision maker provided some legal structure is created, quality control is implemented, and technological and environmental problems are recognized. Various analytical tools, such as energy cost accounting, group critique, and simulation models, have wide application for use in coastal zone management.     

地震映像技术在泉州造船厂海上勘察中的应用

介绍水域高密度地震映像勘察方法,论述该方法中震源技术、GPS定位及测量技术、数据采集技术和资料处理技术,不同于常规浅层地震反射波法的特点。通过对泉州造船厂的海上地震勘察,并结合地质钻孔资料对映像时间剖面进行综合处理和解释,查明该区水下地形的起伏及变化情况,覆盖层的分层、深度以及基岩面的埋深、起伏与构造情况。结果表明,地震映像资料解释结果与海上钻孔资料基本一致,地震映像法是一种用于海上探测行之有效的方法,在近海工程物探领域具有广阔的应用前景。     

Rigid moorings in shallow water: A wave power application. Part I: Experimental verification of methods

Experimental work carried out at 1:60 scale in a wave flume assessed the pitch motion and anchor loading of 3 articulated tower installations in 50 m water depth while being exposed to north Atlantic storms with H_s of 15.2 m and T_p of 18.4 s. The three installations differ only in that their mass and buoyancy characteristics provide a natural period in pitch at equilibrium of 13 s, 20 s and 34 s respectively. It is verified that the dominant behaviour can be simulated by a relatively simple mathematical model, allowing the critical parameters of peak anchor loads and pitch angles to be calculated and extrapolated to full scale. It is demonstrated from the experimental and simulation results that the mass characteristics of a non surface piercing tower can be used to offset some of the challenges of moving to shallow water. If done correctly, it is possible to keep horizontal anchor loads under control and reduce vortex-induced transverse loading at the expense of increased pitch motions. Overall, the use of articulated tower installations in water depths of 50 m would appear to be technically feasible, even in exposed areas. The limitations on the size of such structures and the consequences of the resulting pitch accelerations and induced anchor loads are the subject of further study. It is proposed that the model verified herein can be used to further assess their potential at delivering viable wave power position mooring systems.