A Method to Improve First Order Approximation of Smoothed Particle Hydrodynamics

Smoothed particle hydrodynamics (SPH) is a useful meshless method. The first and second ordersare the most popular derivatives of the field function in the mechanical governing equations. New methodswere proposed to improve accuracy of SPH approximation by the lemma proved. The lemma describes therelationship of functions and their SPH approximation. Finally, the error comparison of SPH method with orwithout our improvement was carried out.     

Synchronization research of a modified time-delayed multi-agent network model

The synchronization of time-delayed multi-agent networks with connected and directed topology is studied. Based on the correlative work about the agent synchronization, a modified model is presented, in which each communication receiver is distributed a delay τ. In addition, a proportional term k is introduced to modulate the delay range and to guarantee the synchronization of each agent. Two new parameters mentioned above are only correlative to the network topology, and a theorem about their connections is derived by both frequency domain method and geometric method. Finally, the theoretical result is illustrated by numerical simulations. Foundation item: the National Natural Science Foundation of China (No. 70571017) and the Research Foundation from Provincial Education Department of Zhejiang of China (No. 20070928)     

The settlement characteristic of underground urban complex in Shanghai

The effects of excavation unloading, construction reloading and underground water on basal heave of excavation projects were presented and analyzed based on the measurement results of an underground urban complex which was located in Shanghai. The effects on water pressure and building settlements were analyzed as well. The numerical analyses by finite element method (FEM) were conducted. It showed that the soil under the excavation base continued to heave during the following certain construction stage. It also found that the bearing capacity of uplift piles which supported the buildings affected the structure quality significantly. The conclusions can be applied in future projects. Foundation item: the National Natural Science Foundation of China (No. 50679041)     

Surface reconstruction of scanned human body using radial basis functions and adaptive partition of unity

It is important to reconstruct a continuous surface representation of the point cloud scanned from a human body. In this paper a new implicit surface method is proposed to reconstruct the human body surface from the points based on the combination of radial basis functions (RBFs) and adaptive partition of unity (PoU). The whole 3D domain of the scanned human body is firstly subdivided into a set of overlapping subdomains based on the improved octrees. The smooth local surfaces are then computed in the subdomains based on RBFs. And finally the global human body surface is reconstructed by blending the local surfaces with the adaptive PoU functions. This method is robust for the surface reconstruction of the scanned human body even with large or non-uniform point cloud which has a sharp density variation. Foundation item: the National Natural Science Foundation of China (No. 50575139) and the Shanghai Special Fund of Informatization (No. 088)     

Code-aided interference suppression in direct sequence spread spectrum systems with eigenvector sign spreading code

For direct sequence spread spectrum (DSSS) communication systems suffering interference, it is known that code-aided interference suppression technique outperforms all of the previous linear or nonlinear methods. In this paper, we proposed an improved code-aided technique which can improve the system performance greatly by using the eigenvector sign (EVS) spreading sequence which depends on the statistical characteristics of the interference and the thermal noise. Foundation item: the National Natural Science Foundation of China (No. 60772100)     

A closed form solution to segment 3D motion using straight-line optical flow

A closed form solution to the problem of segmenting multiple 3D motion models was proposed from straight-line optical flow. It introduced the multibody line optical flow constraint （MLOFC）, a polynomial equation relating motion models and line parameters. The motion models can be obtained analytically as the derivative of the MLOFC at the corresponding line measurement, without knowing the motion model associated with that line. Experiments on real and synthetic sequences were also presented.     

Model-based gait representation via spatial point reconstruction

This paper proposed a novel model-based feature representation method to characterize human walking properties for individual recognition by gait. First, a new spatial point reconstruction approach is proposed to recover the coordinates of 3D points from 2D images by the related coordinate conversion factor (CCF). The images are captured by a monocular camera. Second, the human body is represented by a connected three-stick model. Then the parameters of the body model are recovered by the method of projective geometry using the related CCF. Finally, the gait feature composed of those parameters is defined, and it is proved by experiments that those features can partially avoid the influence of viewing angles between the optical axis of the camera and walking direction of the subject. Foundation item: the National Natural Science Foundation of China (No. 60675024)     

Codes From Strongly Regular （α,β）-reguli

Strongly regular (α, β)-reguli are a class of incidence structures with given conditions which were introduced by Hamilton and Mathon. We introduce two classes of codes constructed from strongly regular (α, β)-reguli within PG(k − 1, q). The codes are related with two-weight codes intimately. Foundation item: the Scientific Research Start-up Foundation of Qingdao University of Science and Technology in China (No. 0022327)     

Study on rotational stabilization in a laser tracking system

The high rolling speed of a missile heavily affects the stabilizing capability of the inertial platform in the laser tracking system (LTS) of the missile. In this paper, a rotational stabilizing platform (RSP) and a fuzzy-PID controller is designed to stabilize the inertial platform. This controller integrates the advantages of both fuzzy controller and classic PID controller. A comparison study is carried out to illustrate the advantages of the proposed fuzzy-PID controller over the classic PID controller. Numerical results indicate that the fuzzy-PID controller outperforms the classic one in effectively handling nonlinear disturbances and quickly stabilizing the inertial platform at the sudden change of missile rolling speed. Foundation item: the China Aerospace Science and Innovation Foundation (No. 06CASC0407)     

A new plan and coordination strategy for robot system based on state space

This paper proposes a general plan and coordination strategy for robot system. The state space for robot system is constructed according to the task requirement and system characteristic. Reachable state of the system is figured out by the system’s internal and external constraints. Task plan and coordination are then transformed as trajectory solving problem in the state space, by which the realizable conditions for the given task are discussed. If the task is realizable, the optimal strategy for task execution could be investigated and obtained in state space. Otherwise, it could be transformed to be realizable via adjusting the system configuration and/or task constraint, and the transformation condition could also be determined. This contributes to design, plan, and coordination of the robotic tasks. Experiments of the manipulator path planning and multi-robot formation movement are conducted to show the validity and generalization of the proposed method. Foundation item: the National Natural Science Foundation of China (No. 60675041) and the Program for New Century Excellent Talents in University (No. NCET-06-0398)     

A two-step outlier removal procedure for surface reconstruction

Outliers in point clouds affect the performance of surface reconstruction directly. Most of outlier removal methods just remove those outliers far away from the real surface and are only applied to handle watertight surface. In this paper, a two-step outlier removal procedure is proposed to filter the point clouds acquired from the gray code and line-shifting technique. The first step is to remove the outliers far away from the real surface. Some feature points are extracted from the point clouds to construct an initial surface. The points with distances to the initial surface greater than a given threshold are removed as distant outliers. The retained points are linked into lines in each structured light sheet using their Voronoi diagrams. Some of lines which are very close to the real surface are removed as near outliers in the second step. The experimental results show that the proposed method is very effective in removing outliers for surface reconstruction. Foundation item: the National Natural Science Foundation of China (No. 30470488)     

Effect of LaNiO3 interlayer on the dielectric properties of Ba0.5Sr0.5TiO3 thin film on Si substrate

In this study, (100)-oriented growth of Ba_0.5Sr_0.5TiO₃ (BST) /LaNiO₃ (LNO) stacks was obtained on Pt(111)/SiO₂/Si substrates by r.f. magnetron sputtering. The orientation of the subsequently deposited Ba_0.5Sr_0.5TiO₃ thin film was strongly affected by the LNO under layer, and the BST thin film deposited on the (100)LNO-coated Si substrate was also found to have a significant (100)-oriented texture. Effects of LNO interlayer on the dielectric properties of BST thin films were investigated. As a result, the tunability of BST thin film was greatly improved with the insertion of (100)-oriented LNO under layer with proper thickness. Foundation item: the National Key Lab of Nano/Micro Fabrication Technology (No. 9140C 790310060C79) and the National Natural Science Foundation of China (No. 60701012)     

A mechanical and experimental study on the heat loss of solar evacuated tube

The experimental system of heat loss of all-glass evacuated solar collector tubes (evacuated tube) is firstly designed and constructed, which uses electric heater as thermal resource. The equilibrium temperatures are less than ±1℃ during the test, and the temperature differences of up/middle/low node in the tube are less than 1 ℃, 3 ℃, and 7℃ respectively. The heat loss of evacuated tube increases about 2.7% with vacuum state of 0.01-1 mPa, and it has the best performance at tube temperature of 20-280℃. The invalidation tube (> 200 mPa) has the biggest heat loss that increases linearly with the tube temperature. The evacuated tubes with the vacuum of 0.01-1 mPa are suitable for most solar adsorption refrigeration.     

Wavelength reservation scheme with switch fabric status in distributed mesh optical networks

A new wavelength reservation scheme is proposed to mitigate the connection setup time and minimize the reconfiguration times of optical cross-connects (OXCs) for WDM optical networks in this study. In this scheme, we consider the reconfiguration information of switch fabrics in the signaling protocol, which is designated as the signaling with switch fabric status (SWFS). Distributed reservation algorithms will reserve the wavelength with minimum of reconfiguration times of OXCs along the route. Simulation results indicate that the proposed schemes with switch fabrics status have shorter setup time, lower switching ratio as well as better blocking performance than those of the traditional classic schemes. Moreover, the proposed schemes with SWFS significantly reduce the number of switch fabrics that need to be reconfigured. Foundation item: the National Natural Science Foundation of China (Nos. 60632010 and 60572029) and the National High Technology Research and Development Program (863) of China (No. 2006AA01Z251)     

Joint distortion model for progressive image transmission using error correcting arithmetic codes

A novel joint source channel distortion model was proposed, which can essentially estimate the average distortion in progressive image transmission. To improve the precision of the model, the redundancy generated by a forbidden symbol in the arithmetic codes is used to distinguish the quantization distortion and the channel distortion, all the coefficients from the first error one to the end of the sequence are set to be a value within the variance range of the coefficients instead of zero, then the error propagation coming from the entropy coding can be essentially estimated, which is disregarded in the most conventional joint source channel coding （JSCC） systems. The precision of the model in terms of average peak-signal-to-noise has been improved about 0.5 dB compared to classical works. An efficient unequal error protection system based on the model is developed, and can be used in the wireless communication systems.     

On the Existence of （v, 3 × 3,λ）-Splitting Balanced Incomplete Block Design with A between 2 to 9

Let (υ, u × c, λ)-splitting BIBD denote a (υ, u × c, λ)-splitting balanced incomplete block design of order υ with block size u × c and index λ. The necessary conditions for the existence of a (υ, u × c, λ)-splitting BIBD are υ ⩾ uc, λ(υ − 1) ≡ 0 0 mod (c(u − 1)) and λυ(υ − 1) ≡ 0 mod (c ² u(u − 1)). In this paper, for 2 ⩽ λ ⩽ 9 the necessary conditions for the existence of a (υ, 3 × 3, λ)-splitting BIBD are also sufficient with one possible exception for (υ, λ) = (39, 9). Foundation item: the National Natural Science Foundation of China (No. 10771193); the Starter Foundation for the Doctors of Zhejiang Gongshang University (No. 1020XJ030517); the Natural Science Foundation of Universities of Jiangsu Province (No. 07KJB110090); the Starter Foundation for the Doctors of Nantong University (No. 07B12)     

Filling the gap between voters and cryptography in e-voting

Cryptography is an important tool in the design and implementation of e-voting schemes since it can provide verifiability, which is not provided in the traditional voting. But in the real life, most voters can neither understand the profound theory of cryptography nor perform the complicated cryptographic computation. An e-voting system is presented in this paper to leverage the use of cryptography. It combines the advantages of voting scheme of Moran-Naor and voting scheme based on homomorphic encryption. It makes use of the cryptographic technique, but it hides the details of cryptographic computation from voters. Compared with voting scheme of Moran-Naor, the new system has three advantages: the ballots can be recovered when the voting machine breaks down, the costly cut-and-choose zero-knowledge proofs for shuffling votes made by the voting machine are avoided and the partial tally result in each voting machine can be kept secret. Foundation item: the National Natural Science Foundation of China (No. 60673076) and the National High Technology Research and Development Program (863) of China (No. 2008AA01Z403)     

Cost-benefit of interface management improvement in design-manufacturing chain

Design-manufacturing chain (D-MC) is the most important link of the supply chain with the greatest possibility in cost reduction. How to strengthen the effective management of interfacial relationship between designer and manufacturer and increase the efficency of interface management concerns the efficiency of the whole supply chain. In order to evaluate and improve the impacts of D-MC interfacial relationship, first we should construct the evaluation index system and then we should analyze the total cost and benefit of the interfacial relationship betterment, including the cost of member units in D-MC, the opportunity cost of cooperation partners, and the market returns resulted from the interfacial relationship improvement, which will advance the whole supply chain efficiency as well as enhance the management performance of D-MC. Foundation item: the Chinese Public Service Platform for Science and Technology Management (No. 06DZ22924) and the Economic Globalization and Innovation (No. 08692106700)     

Monte Carlo simulation of electron swarms parameters in c-C4F8/CF4 gas mixtures

The swarm parametes for c-C₄F₈/CF₄ mixtures, including the density-normalized effective ionization coefficient, drift velocity and mean energy were calculated using Monte-Carlo method with the null collision technique. The overall density-reduced electric field strength could be varied between 150 and 500 Td, while the c-C₄F₈ content in gas mixtures is varied in the range of 0–100%. The value of the density-normalized effective ionization coefficient shows a strong dependence on the c-C₄F₈ content, becoming more electronegative as the content of c-C₄F₈ is increased. The drift velocity of c-C₄F₈/CF₄ mixtures is more affected by CF₄. The calculated limiting field strength for c-C₄F₈/CF₄ mixtures is higher than that of SF₆/CF₄. Foundation item: the National Natural Science Foundation of China (No. 50777041)