共查询到20条相似文献,搜索用时 93 毫秒
1.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(1-3):157-190
Summary This paper considers the scope, methodologies and architectures for the design and development of interacting control systems in road vehicles. The increasing use of electronic controls leads inevitably to an increase in overall system complexity. Given the time and economic constraints of the modern automotive industry, it is not feasible to synthesise and validate the full set of vehicle controls in the form of a unified and centralized controller. On the other hand a fully decentralized approach to control system development and operation will induce performance limitations from un-modelled or unexpected interactions; at worst, such interactions can cause instability and loss of function. There is now increasing pressure to achieve control coordination whilst maintaining a modular approach to the overall system design. With this in mind, the paper provides a framework to review current practice in integrated vehicle control, assesses recent developments in control integration methodologies that are most relevant to the vehicle application, and formulates an enhanced multi-layer architecture that includes explicit coordination functionality. Overall emphasis is placed on the role of control system architecture, the resulting flow of control information and the implications for control system design. An example from handling dynamics is presented, demonstrating the viability of new and flexible approaches. In conclusion a number of outstanding research problems are highlighted. 相似文献
2.
根据当前智慧高速公路系统的发展历程,总结一些典型的车路协同系统逻辑与物理模型。在总结国内外智慧高速公路系统的整体架构之后,提出新一代智慧高速系统的总体架构-IntelliWay,包括智慧高速公路系统分层模块化架构、基于变耦合程度的智能分级和基于事件驱动的数据分发机制。同时,根据当前智慧高速公路系统的主流应用技术,总结车载高精度定位、高级驾驶辅助系统(Advanced Driver Assistance System, ADAS)与车载总线、路侧设备优化、异构网络融合、网络负载均衡、网络信息安全、多传感器融合与协同感知、以用户为中心的场景自适应信息发布、车辆群体协同自动驾驶、基于大数据与人工智能的交通态势预测、车道级主动交通管理、组件式应用服务开发等驱动智慧高速公路系统快速发展的新兴技术研究现状,然后基于以上关键技术的特点提出未来智慧高速公路系统应用的实施建议;分析广播式交通信息服务、主动交通管理、伴随式信息服务、自动驾驶专用道、车辆队列协同驾驶等智慧高速公路系统的典型应用场景,进行智慧高速系统的测评方法分析和相关案例分析。最后,系统性地分析和预测智慧高速系统存在的挑战及未来发展趋势,以... 相似文献
3.
4.
5.
Optimal Adaptive Cruise Control with Guaranteed String Stability 总被引:2,自引:0,他引:2
Chi-Ying Liang Huei Peng 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1999,32(4):313-330
A two-level Adaptive Cruise Control (ACC) synthesis method is presented in this paper. At the upper level, desired vehicle acceleration is computed based on vehicle range and range rate measurement. At the lower (servo) level, an adaptive control algorithm is designed to ensure the vehicle follows the upper level acceleration command accurately. It is shown that the servo-level dynamics can be included in the overall design and string stability can be guaranteed. In other words, the proposed control design produces minimum negative impact on surrounding vehicles. The performance of the proposed ACC algorithm is examined by using a microscopic simulation program - ACCSIM created at the University of Michigan. The architecture and basic functions of ACCSIM are described in this paper. Simulation results under different ACC penetration rate and actuator/engine bandwidth are reported. 相似文献
6.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4-5):313-330
A two-level Adaptive Cruise Control (ACC) synthesis method is presented in this paper. At the upper level, desired vehicle acceleration is computed based on vehicle range and range rate measurement. At the lower (servo) level, an adaptive control algorithm is designed to ensure the vehicle follows the upper level acceleration command accurately. It is shown that the servo-level dynamics can be included in the overall design and string stability can be guaranteed. In other words, the proposed control design produces minimum negative impact on surrounding vehicles. The performance of the proposed ACC algorithm is examined by using a microscopic simulation program – ACCSIM created at the University of Michigan. The architecture and basic functions of ACCSIM are described in this paper. Simulation results under different ACC penetration rate and actuator/engine bandwidth are reported. 相似文献
7.
Huei Peng Weibin Zhang Masayoshi Tomizuka Steven Shladover 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1994,23(1):259-278
The architecture of the PATH vehicle lateral control system is presented in this paper. The two main modules are an intelligent reference/sensing system, and an Frequency-Shaped-Linear-Quadratic/preview control algorithm. The whole lateral control system was formerly evaluated on a two-door test vehicle. It was transplanted to a four-door vehicle which is considerably different from the older two-door test vehicle in dynamic characteristics. The objective of this study is to investigate the reusability of our control system. 相似文献
8.
9.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(11):991-1011
A robust nonparametric approach to vehicle stability control by means of a four-wheel steer by wire system is introduced. Both yaw rate and sideslip angle feedbacks are used in order to effectively take into account safety as well as handling performances. Reference courses for yaw rate and sideslip angle are computed on the basis of the vehicle speed and the handwheel angle imposed by the driver. An output multiplicative model set is used to describe the uncertainty arising from a wide range of vehicle operating situations. The effects of saturation of the control variables (i.e. front and rear steering angles) are taken into account by adopting enhanced internal model control methodologies in the design of the feedback controller. Actuator dynamics are considered in the controller design. Improvements on understeer characteristics, stability in demanding conditions such as turning on low friction surfaces, damping properties in impulsive manoeuvres, and improved handling in closed loop (i.e. with driver feedback) manoeuvres are shown through extensive simulation results performed on an accurate 14 degrees of freedom nonlinear model, which proved to give good modelling results as compared with collected experimental data. 相似文献
10.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(1):259-278
SUMMARY The architecture of the PATH vehicle lateral control system is presented in this paper. The two main modules are an intelligent reference/sensing system, and an Frequency-Shaped-Linear-Quadratic/preview control algorithm. The whole lateral control system was formerly evaluated on a two-door test vehicle. It was transplanted to a four-door vehicle which is considerably different from the older two-door test vehicle in dynamic characteristics. The objective of this study is to investigate the reusability of our control system. 相似文献
11.
S. H. Jeong C. G. Choi J. N. Oh P. J. Yoon B. S. Kim M. Kim K. H. Lee 《International Journal of Automotive Technology》2010,11(3):409-416
This paper presents a low cost design and implementation of a parallel parking assist system (PPAS) based on ultrasonic sensors.
Generally, a PPAS requires several types of sensors, such as an ultrasonic sensor, camera sensor, radar sensor and laser sensor
for parking space detection. However, our proposed PPAS only requires two ultrasonic sensors on the front and lateral sides
for parking space detection. Moreover, a steering angle sensor and wheel speed sensor installed in the vehicle are used to
obtain vehicle position information for localization in ultrasonic range data. The hardware architecture of the PPAS based
on an electronic control unit (ECU) module, sensor modules and a human machine interface (HMI) module was proposed. Moreover,
the software architecture of the PPAS is based on system initialization, scheduling, recognition and a control algorithm.
In particular, a novel sensor algorithm was proposed to minimize the vehicle corner error of the ultrasonic sensor. A prototype
of the PPAS based on the proposed architecture was constructed. The experimental results demonstrate that the implemented
prototype is robust and successfully performs parking space detection and automatic steering control. Finally, the low cost
design and implementation of the PPAS was possible due to the cheap ultrasonic sensors, simple hardware design and low computational
complexity of the proposed algorithm. 相似文献
12.
汽车车身计算机辅助设计系统的集成环境 总被引:1,自引:0,他引:1
本文分析了计算机辅助车身设计的特点,指出必须集成的观战构建车身CAD系统,并给出了一车身身CAD系统集成环境的组织结构。 相似文献
13.
汽车遥控驾驶功能可以提升用户操控便捷性及安全性,本文对汽车遥控驾驶运用场景进行了描述,基于相关新的量产车型对遥控驾驶功能进行了对标分析,得出了遥控驾驶应实现的基本功能及实现该功能所需要的硬件配置,提出了新能源电动汽车遥控驾驶功能系统架构设计方案及功能控制策略,为后续车辆遥控驾驶功能开发提供借鉴和参考。 相似文献
14.
Chunsheng Li Shihui Luo Colin Cole Maksym Spiryagin 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2017,55(7):1045-1070
Health monitoring systems with low-cost sensor networks and smart algorithms are always needed in both passenger trains and heavy haul trains due to the increasing need for reliability and safety in the railway industry. This paper focuses on an overview of existing approaches applied for railway vehicle on-board health monitoring systems. The approaches applied in the data measurement systems and the data analysis systems in railway on-board health monitoring systems are presented in this paper, including methodologies, theories and applications. The pros and cons of the various approaches are analysed to determine appropriate benchmarks for an effective and efficient railway vehicle on-board health monitoring system. According to this review, inertial sensors are the most popular due to their advantages of low cost, robustness and low power consumption. Linearisation methods are required for the model-based methods which would inevitably introduce error to the estimation results, and it is time-consuming to include all possible conditions in the pre-built database required for signal-based methods. Based on this review, future development trends in the design of new low-cost health monitoring systems for railway vehicles are discussed. 相似文献
15.
The perspectives of research for enhancing active safety based on advanced control technology 总被引:1,自引:0,他引:1
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2007,45(5):413-431
This paper considers the scope and the methodologies for enhancing active safety of road vehicles by sensing and control technologies. The first part of this paper introduces statistical data of traffic accidents in Japan, and describes the development of the drive recorder for accident/incident survey and analysis. Based on vehicle dynamics data, the algorithm of the drive recorder for capturing near-miss incident data is introduced. The second part of this paper reviews control problems of vehicle dynamics on micro-scale electric vehicles for enhancing vehicle dynamics and driving assistance function. In particular, the direct yaw moment control using in-wheel-motors and the active front steering control algorithm are described. The third part of the paper introduces the advanced driver assistance system adapted to driver characteristics and traffic situations. This part mainly describes an adaptive system, which adjusts the assisting manoeuvre depending on individual driver behaviour and situation, and some experimental investigations using the active interface vehicle and driving simulator. Finally, some perspectives and new challenges for future research on vehicle control technology are mentioned. 相似文献
16.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(5):587-617
Modern software tools have enhanced modelling, analysis and simulation capabilities pertaining to control of dynamic systems. In this regard, in this paper a full vehicle model with flexible body is exposed by using MSC. ADAMS and MSC. NASTRAN. Indeed, one of the most significant vehicle dynamic controls is directional stability control. In this case, the vehicle dynamic control system (VDC) is used to improving the vehicle lateral and yaw motions in critical manoeuvres. In this paper, for design the VDC system, an optimal control strategy has been used for tracking the intended path with optimal energy. For better performance of VDC system, an anti-lock brake system (ABS) is designed as a lower layer of the control system for maintaining the tyre longitudinal slip in proper value. The performances of the controller on rigid and flexible models are illustrated, and the results show the differences between the control efforts for these models, which are related to the differences of dynamic behaviours of rigid and flexible vehicle dynamic models. 相似文献
17.
Mümin Tolga Emirler Levent Güvenç Bilin Aksun Güvenç 《International Journal of Automotive Technology》2018,19(2):359-367
This paper is on the design of cooperative adaptive cruise control systems for automated driving of platoons of vehicles in the longitudinal direction. Longitudinal models of vehicles with simple dynamics, an uncertain first order time constant and vehicle to vehicle communication with a communication delay are used in the vehicle modeling. A robust parameter space approach is developed and applied to the design of the cooperative adaptive cruise control system. D-stability is chosen as the robust performance goal and the feedback PD controller is designed in controller parameter space to achieve this D-stability goal for a range of possible longitudinal dynamics time constants and different values of time gap. Preceding vehicle acceleration is sent to the ego vehicle using vehicle to vehicle communication and a feedforward controller is used in this inter-vehicle loop to improve performance. Simulation results of an eight vehicle platoon of heterogeneous vehicles are presented and evaluated to demonstrate the efficiency of the proposed design method. Also, the proposed method is compared with a benchmark controller and the feedback only controller. Time gap regulation and string stability are used to assess performance and the effect of the vehicle to vehicle communication frequency on control system performance is also investigated. 相似文献
18.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(4):201-221
SUMMARY This paper describes a multiport approach to computer-aided modeling of vehicle dynamics. The modeling approach produces models that are suitable for the interactive design and evaluation of complex control strategies. The vehicle model which can be used for ride and handling analysis, is built from modular components. The components are programmed using the syntax of the computer aided control system design (CACSD) program EASYS. Seven modeling components are used to create a three-dimensional vehicle dvnamics model. The model is flexible enoug-h to simulate any suspension design with revolute joints. Each component of the model consists of a FORTRAN subroutine and a main calling module called a macro. To simplify the process of model building, the modeling components in the car model are designed to represent physical elements, such as the spring, damper, link or tire. To create a model, the components, which are represented by blocks, are interconnected through points, located on the blocks, called pons. These ports have been designed to simulate the location of the connection points between the physical elements, as observed in real systems. The construction of multibody models within a CACSD program offers the flexibility of simultaneous interactive simulation of the three-dimensional dvnamics and evaluation of the desien of the controls. Although modeling of multibody systems using FORTRAN components has been pioneered by Chace, Haug and Orlandea; and bond graph modeling of multibody systems has been investigated by Bos, this approach is novel because:- The model is included in the control system design program (EASYS). This arrangement allows the designer to exploit the advanced control design tools available in the program. Furthermore, this approach significantly reduces the computation time required for running the model after parameters modification. The model is built from components that are interconnected by ports which represent the actual physical location of the connection points between the elements. The multiport approach simplifies the model building process for multibody systems. This simplification is achieved by reducing the model of a multibody system to a block diagram form. 相似文献
19.
Ashraf ZEID Assistant Professor David CHANG Graduate Student 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1989,18(4):201-221
This paper describes a multiport approach to computer-aided modeling of vehicle dynamics. The modeling approach produces models that are suitable for the interactive design and evaluation of complex control strategies. The vehicle model which can be used for ride and handling analysis, is built from modular components. The components are programmed using the syntax of the computer aided control system design (CACSD) program EASYS. Seven modeling components are used to create a three-dimensional vehicle dvnamics model. The model is flexible enoug-h to simulate any suspension design with revolute joints.
Each component of the model consists of a FORTRAN subroutine and a main calling module called a macro. To simplify the process of model building, the modeling components in the car model are designed to represent physical elements, such as the spring, damper, link or tire. To create a model, the components, which are represented by blocks, are interconnected through points, located on the blocks, called pons. These ports have been designed to simulate the location of the connection points between the physical elements, as observed in real systems. The construction of multibody models within a CACSD program offers the flexibility of simultaneous interactive simulation of the three-dimensional dvnamics and evaluation of the desien of the controls.
Although modeling of multibody systems using FORTRAN components has been pioneered by Chace, Haug and Orlandea; and bond graph modeling of multibody systems has been investigated by Bos, this approach is novel because:-
The model is included in the control system design program (EASYS). This arrangement allows the designer to exploit the advanced control design tools available in the program. Furthermore, this approach significantly reduces the computation time required for running the model after parameters modification.
The model is built from components that are interconnected by ports which represent the actual physical location of the connection points between the elements. The multiport approach simplifies the model building process for multibody systems. This simplification is achieved by reducing the model of a multibody system to a block diagram form. 相似文献
Each component of the model consists of a FORTRAN subroutine and a main calling module called a macro. To simplify the process of model building, the modeling components in the car model are designed to represent physical elements, such as the spring, damper, link or tire. To create a model, the components, which are represented by blocks, are interconnected through points, located on the blocks, called pons. These ports have been designed to simulate the location of the connection points between the physical elements, as observed in real systems. The construction of multibody models within a CACSD program offers the flexibility of simultaneous interactive simulation of the three-dimensional dvnamics and evaluation of the desien of the controls.
Although modeling of multibody systems using FORTRAN components has been pioneered by Chace, Haug and Orlandea; and bond graph modeling of multibody systems has been investigated by Bos, this approach is novel because:-
The model is included in the control system design program (EASYS). This arrangement allows the designer to exploit the advanced control design tools available in the program. Furthermore, this approach significantly reduces the computation time required for running the model after parameters modification.
The model is built from components that are interconnected by ports which represent the actual physical location of the connection points between the elements. The multiport approach simplifies the model building process for multibody systems. This simplification is achieved by reducing the model of a multibody system to a block diagram form. 相似文献
20.
C. Marsh T.J. Gordon Q.H. Wu 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1995,24(8):597-616
This study considers a new design methodology in the context of active vehicle suspension control. The approach combines concepts from Stochastic Optimal Control with those of Learning Automata. A learning automaton effectively learns optimal control on-line in the vehicle, in an appropriate stochastic “test-track” environment. For practical application, the overwhelming advantage of this approach is that no explicit modelling is required, and considerable time savings may be expected in system development. This simulation study considers the on-line learning of optimal control in a low-bandwidth active suspension system, where control feedback is confined to a body-mounted accelerometer at each corner of the vehicle. It is shown that learning can successfully take place under a range of conditions, including the case when there is substantial transducer noise. The performance of the resulting control system is shown to depend heavily on the nature of the learning environment. 相似文献