Capacity at unsignalized two-stage priority intersections

The subject of this paper is the capacity of minor-street traffic movements across major divided four-lane roadways (and other roads with two separate carriageways) at unsignalized intersections. The center of the intersection, corresponding to the width of the median, often provides room for drivers who have crossed the first half of the major road to stop before proceeding across the second major traffic stream. This situation, which is common with multilane major streets, is called two-stage priority. Here the capacity for minor-street through traffic is larger than at intersections without such a central storage space. These wider intersections provide an additional capacity that cannot be evaluated by conventional capacity calculation models. An analytical theory is presented for the estimation of capacity under two-stage priority conditions. It is based on an approach by Harders, although major improvements were necessary to match the results with realistic conditions. In addition to analytical theory, simulations were performed that enable an analysis under more realistic conditions. The result is a set of equations that compute the capacity for a minor-street through-traffic movement in the two-stage priority situation. ©     

Development of a delay model for unsignalized intersections applicable to traffic assignment

Abstract

This paper develops a model for estimating unsignalized intersection delays which can be applied to traffic assignment (TA) models. Current unsignalized intersection delay models have been developed mostly for operational purposes, and demand detailed geometric data and complicated procedures to estimate delay. These difficulties result in unsignalized intersection delays being ignored or assumed as a constant in TA models.

Video and vehicle license plate number recognition methods are used to collect traffic volume data and to measure delays during peak and off-peak traffic periods at four unsignalized intersections in the city of Tehran, Iran. Data on geometric design elements are measured through field surveys. An empirical approach is used to develop a delay model as a function of influencing factors based on 5- and 15-min time intervals. The proposed model estimates delays on each approach based on total traffic volumes, rights-of-way of the subject approach and the intersection friction factor. The effect of conflicting traffic flows is considered implicitly by using the intersection friction factor. As a result, the developed delay model guarantees the convergence of TA solution methods.

A comparison between delay models performed using different time intervals shows that the coefficients of determination, R ², increases from 43.2% to 63.1% as the time interval increases from 5- to 15-min. The US Highway Capacity Manual (HCM) delay model (which is widely used in Iran) is validated using the field data and it is found that it overestimates delay, especially in the high delay ranges.     

A programmable calculation procedure for number of traffic conflict points at highway intersections

Traffic movement conflict points at intersections are the points at which traffic movements intersect (including crossing, merging, and diverging). Numbers and distribution of different types of conflict points are used to evaluate intersection access management designs and safety performance. Traditionally, the determination of the numbers of conflict points for different traffic movements is based on manual methods, which causes the difficulty for computerized procedures to evaluate safety performance of different access management designs. Sometimes, a programmable calculation procedure may provide more effective solutions as compared with manual methods. This paper presents a programmable calculation procedure for the determination of the numbers of conflict points, which could be used as a basis for a computerized procedure. Concepts of virtual movement lanes and intersection quadrants are introduced to specify types of intersections, traffic lane configurations, and traffic movement regulations. Calculation models, based on such concepts, for traffic movement conflict points at signalized and unsignalized intersections can be obtained. In support of the procedure, case studies are presented in the paper. The procedure presented in the paper can be programmed into a computer program for the purpose of a computerized evaluation of intersection safety and design performance of different access management or control approaches. Copyright © 2012 John Wiley & Sons, Ltd.     

Effects of intersection field of view on emergent collision avoidance performance at unsignalized intersections: analysis based on driving simulator experiments

Proper intersection sight distance can effectively lower the possibility of intersection accidents. American Association of State Highway and Transportation Officials (2011) provide a series of recommended dimensions of intersection sight triangles for uncontrolled and stop/yield‐controlled intersections. However, in reality, although the actual intersection design for unsignalized intersections satisfies the requirements of sight distance and clear sight triangle in American Association of State Highway and Transportation Officials' guideline, there are still a large number of crashes occurring at unsignalized intersections for drivers running stop/yield signs or failing to slow down. This paper presents a driving simulator study on pre‐crash at intersections under three intersection field of view (IFOV) conditions. The aim was to explore whether better IFOVs at unsignalized intersections improve their emergent collision avoidance performance under an assumption of valid intersection sight distance design. The experimental results show drivers' ability to identify potential hazards to be significantly affected by their IFOVs. As drivers' IFOV improved, drivers were more likely to choose braking actions to avoid collisions. Better IFOVs were also associated with significant increases in brake time to intersection and significant reductions in deceleration rate and crash rate, thus leading to a lower risk of traffic crash involvement. The results indicate that providing a better IFOV for drivers at intersections should be encouraged in practical applications in order to improve drivers' crash avoidance capabilities. Copyright © 2016 John Wiley & Sons, Ltd.     

Traffic engineering and the new German highway capacity manual

Traffic engineering in Germany has a long tradition. The standards for practical application, however, are distributed among a variety of guidelines. These, in many cases, are not up to date. Therefore, in practice, more recent research results are applied by traffic authorities and consultants. To improve this practical application on a more sophisticated background, a manual for traffic quality and capacity on streets and highways is intended to be prepared. A first draft has been worked out by a university institute and is to be published in 1994. This article presents the background for the chapter on highway sections and motorway interchanges for signalized and unsignalized intersections. Pedestrian and public transit facilities are mentioned as well. Special attention is drawn to the most recent research results which are included in the manual. These are delays at intersections under nonstationary conditions, including queue length and distributions (e.g. 95-percentile queue length). For motorways, the lack of a general speed limit in Germany has important impacts on determining measures of effectiveness.     

A discussion on the parameters of Cowan M3 distribution for Turkey

In recent years, Cowan M3 distribution model started to be used widely around the world by traffic engineers and researchers for capacity and performance analysis of roundabouts and unsignalized intersections. However, some differences between the usage and application in different countries are observed. This is mainly because of the difference between drivers’ behaviors. In this study, the present applications of Cowan M3 distribution and its parameters are discussed and more appropriate parameters that will define Turkish drivers’ behavior are searched.     

Evolution of the TRANSYT model in a developing country

TRANSYT has been used in Chile since the early 1980s for cost–benefit analysis of infrastructure and traffic management projects. It is also the main tool of the Area Traffic Control Unit of Santiago de Chile since mid 1990s. As a result of this experience, many methodological improvements to the model have been done in order to take into account local conditions. This paper presents a review of these methodological as well as practical advances on the TRANSYT model made in the Chilean context during the past 15 years. Issues considered are cruise time distributions, the cycle-time selection method, saturation flows and car equivalents, public transport modeling, peak-hour delay calculation, modeling unsignalized intersections and zebra crossings, and fuel-consumption estimation.     

A virtual vehicle probe model for time-dependent travel time estimation on signalized arterials

Estimation of time-dependent arterial travel time is a challenging task because of the interrupted nature of urban traffic flows. Many research efforts have been devoted to this topic, but their successes are limited and most of them can only be used for offline purposes due to the limited availability of traffic data from signalized intersections. In this paper, we describe a real-time arterial data collection and archival system developed at the University of Minnesota, followed by an innovative algorithm for time-dependent arterial travel time estimation using the archived traffic data. The data collection system simultaneously collects high-resolution “event-based” traffic data including every vehicle actuations over loop detector and every signal phase changes from multiple intersections. Using the “event-based” data, we estimate time-dependent travel time along an arterial by tracing a virtual probe vehicle. At each time step, the virtual probe has three possible maneuvers: acceleration, deceleration and no-speed-change. The maneuver decision is determined by its own status and surrounding traffic conditions, which can be estimated based on the availability of traffic data at intersections. An interesting property of the proposed model is that travel time estimation errors can be self-corrected, because the trajectory differences between a virtual probe vehicle and a real one can be reduced when both vehicles meet a red signal phase and/or a vehicle queue. Field studies at a 11-intersection arterial corridor along France Avenue in Minneapolis, MN, demonstrate that the proposed model can generate accurate time-dependent travel times under various traffic conditions.     

Distributed conflict-free cooperation for multiple connected vehicles at unsignalized intersections

Connected vehicles will change the modes of future transportation management and organization, especially at intersections. In this paper, we propose a distributed conflict-free cooperation method for multiple connected vehicles at unsignalized intersections. We firstly project the approaching vehicles from different traffic movements into a virtual lane and introduce a conflict-free geometry topology considering the conflict relationship of involved vehicles, thus constructing a virtual platoon. Then we present the modeling of communication topology to describe two modes of information transmission between vehicles. Finally, a distributed controller is designed to stabilize the virtual platoon for conflict-free cooperation at intersections. Numerical simulations validate the effectiveness of this method.     

Real-time estimation of turning movement counts at signalized intersections using signal phase information

A variety of sensor technologies, such as loop detectors, traffic cameras, and radar have been developed for real-time traffic monitoring at intersections most of which are limited to providing link traffic information with few being capable of detecting turning movements. Accurate real-time information on turning movement counts at signalized intersections is a critical requirement for applications such as adaptive traffic signal control. Several attempts have been made in the past to develop algorithms for inferring turning movements at intersections from entry and exit counts; however, the estimation quality of these algorithms varies considerably. This paper introduces a method to improve accuracy and robustness of turning movement estimation at signalized intersections. The new algorithm makes use of signal phase status to minimize the underlying estimation ambiguity. A case study was conducted based on turning movement data obtained from a four-leg signalized intersection to evaluate the performance of the proposed method and compare it with two other existing well-known estimation methods. The results show that the algorithm is accurate, robust and fairly straightforward for real world implementation.     

A new class of dynamic methods for the identification of origin-destination flows

A new systems dynamics approach for the identification of origin-destination (O-D) flows in a traffic system is presented. It is the basic idea of this approach that traffic flow through a facility is treated as a dynamic process in which the sequences of short-time exit flow counts depend by causal relationships upon the time-variable sequences of entrance flow volumes. In that way enough information can be obtained from the counts at the entrances and the exits to obtain unique and bias-free estimates for the unknown O-D flows without further a priori information. Four different methods were developed: an ordinary least squares estimator involving cross-correlation matrices, a constrained optimization method, a simple recursive estimation formula and estimation by Kalman filtering. The methods need only moderate computational effort and are particularly useful for tracking time-variable O-D patterns for on-line identification and control purposes. An analysis of the accuracy of the estimates and a discussion of the convergence properties of the methods are given. Finally, a comparison with some conventional static estimation procedures is carried out using synthetic as well as real data from several intersections. These tests demonstrated that the presented dynamic methods are highly superior to conventional techniques and produce more accurate results.     

非灯控交叉口交通安全状况评价

非灯控交叉口是交通流中的节点,对非灯控交叉口的交通安全状况进行评价具有导向性意义。文章针对交叉口管控存在的问题,提出了交通安全状况评价原则和主要方法,阐述了非灯控交叉口交通安全的影响因素,并通过对沈阳市刘家窑十字交叉口进行交通安全状况评价,提出了具体的交叉口交通安全改善措施,以提高非灯控交叉口的交通安全性。     

Signalized intersections with variable flow rates: II A model for delay estimation

This second part of our work develops a model for delay estimation at intersections whose traffic signal controls are continuously being updated. Generally, these traffic signals are centrally controlled. The foundation for the delay estimation model is based on a queuing theory model called “Preemptive resume discipline for M/G/1 with two priority levels.” This queuing model assumes that two customers arrive at acertain point by a Poisson arrival process, and that one customer has service priority over the second customer. The analogy for the case of intersection control is that the preferred customers are the red lights and the secondary customers are the vehicles. In order to adapt the model to the realistic behavior of vehicle traffic at continuously adjusted signals, components are derived to modify the model. The simulation results of the first part of this work are used to calculate adjustment factors that fairly accurately reproduce the simulated delays. This gives rise to the advantage of using in practice a closed mathematical model, in particular when trying to optimize the operation of signalized intersections at the network level.     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

Noise level in the vicinity of signalized roundabouts

The analysis, assessment and estimation of noise levels in the vicinity of intersections is a more complex problem than a similar analysis for roads and streets. This is due to the varied geometry of the intersections, differences in the loads of individual movements, participation of heavy vehicles and mass transport vehicles, as well as the various types of traffic management and traffic control. This article analyses the influence of intersection type and traffic characteristics on the noise levels in the vicinity of classic channelized intersections with signalization, roundabouts and signalized roundabouts. Based on the conducted measurements, it has been established that, with comparable traffic parameters and the same distance from the geometric centre of the intersection, the L_Aeq value for signalized roundabouts is 2.5–10.8 dB higher in comparison to classic channelized intersections with signalization and 3.3–6.7 dB higher in relations to the analysed roundabout. Additionally the differences between L_Aeq levels at individual entries at the same signalized roundabouts may reach the value of approximately 4.5 dB. Such situation is influenced by differences in the intersection geometry, diameter of the intersection’s central island, traffic flow type, traffic management at the entries and traffic volume, especially the amount and traffic movements of multiple axle heavy vehicles. These factors have been analysed in detail in relation to signalized roundabouts in this paper.     

A macroscopic theory for unsignalized intersections

The following paper presents a dynamic macroscopic model for unsignalized intersections which accounts for time-limited disruptions in the minor stream flow, even in free-flow conditions when the average flow demand is satisfied. It introduces a deterministic fictive traffic light to represent an average alternating sequence of available and busy time periods for insertion depending on the major stream flow. Two allocation schemes of the total outflow during green periods are developed to model the influence or non-influence of the minor stream over the major stream flow. The aggregation of the resulting dynamic flow variations gives relevant capacity values. Moreover, the model predicts accurate average vehicle delay and queue length estimates compared to theoretical and empirical data. It has three easy-to-measure parameters and can be integrated into a dynamic macroscopic simulation tool for urban networks.     

Estimation of saturation flow at signalised intersections of developing cities: a micro-simulation modelling approach

Traffic characteristics and operations at the signalised intersections of developing cities are significantly different from those at the similar intersections of cities in developed countries. Considering this, a new microscopic simulation technique, where a co-ordinate approach to modelling vehicle location is adopted, has been used for modelling the traffic operations at signalised intersections of developing cities. The model has been calibrated and validated on the basis of data collected from Dhaka, the capital of Bangladesh. It has been found that the concept of passenger car unit (PCU), which is widely used as a signal design parameter, is not applicable in case of mixed traffic comprising of both motorised and non-motorised vehicles. Therefore, using the developed simulation model the saturation flows at signalised intersections are investigated in an aggregate form of vehicles per hour. It has also been found that saturation flows in terms of aggregate vehicles are very much dependent on the approach width, turning proportion and composition of the traffic mix. Using the simulation results, an equation has also been regressed in order to be able to estimate the saturation flow from the influencing variables like road width, turning proportion, percentage of heavy and non-motorised vehicles.     

Review on Theoretical Delay Estimation Model for Signalized Intersections

Traffic delay is an effective index for estimating the performance of a signalized intersection. In this study, we provide a comprehensive review of the theoretical delay estimation model over the last ca. 90 years. For fixed-time signalized intersections, we classified the estimation development process into three stages. Stage 1 covered 1920s–1970s, when approaches based on steady-state theory were derived. These methods obtain accurate predictions with low degrees of saturation, but overestimate the delay with higher saturation and cannot provide reasonable results for oversaturated conditions. To accommodate high saturation, time-dependent models were proposed and improved in Stage 2, 1970s–2000s, using coordination transformation techniques. Progression factors to account for the filtering impact from upstream intersections were also introduced during this period. Due to inaccurate approximation of certain specific traffic conditions, some modified approaches and supplementary terms were derived from 2000 onwards (Stage 3), which facilitate the evolution of the delay estimation method and improved approximation results. Some new techniques, including artificial intelligence algorithms, were also introduced into delay estimation in this era. We also describe theoretical delay measurement methods for actuated control intersections with a similar time line. From our summary of the evolution of theoretical delay models, we highlight some deficiencies and future research directions.     

An intersection turning movement estimation procedure based on path flow estimator

Estimation of intersection turning movements is one of the key inputs required for a variety of transportation analysis, including intersection geometric design, signal timing design, traffic impact assessment, and transportation planning. Conventional approaches that use manual techniques for estimation of turning movements are insensitive to congestion. The drawbacks of the manual techniques can be amended by integrating a network traffic model with a computation procedure capable of estimating turning movements from a set of link traffic counts and intersection turning movement counts. This study proposes using the path flow estimator, originally used to estimate path flows (hence origin–destination flows), to derive not only complete link flows, but also turning movements for the whole road network given some counts at selected roads and intersections. Two case studies using actual traffic counts are used to demonstrate the proposed intersection turning movement estimation procedure. Copyright © 2010 John Wiley & Sons, Ltd.