Geographical unit based analysis in the context of transportation safety planning

A wide array of spatial units has been explored in macro-level modeling. With the advancement of Geographic Information System (GIS) analysts are able to analyze crashes for various geographical units. However, a clear guideline on which geographic entity should be chosen is not present. Macro level safety analysis is at the core of transportation safety planning (TSP) which in turn is a key in many aspects of policy and decision making of safety investments. The preference of spatial unit can vary with the dependent variable of the model. Or, for a specific dependent variable, models may be invariant to multiple spatial units by producing a similar goodness-of-fits. In this study three different crash models were investigated for traffic analysis zones (TAZs), block groups (BGs) and census tracts (CTs) of two counties in Florida. The models were developed for the total crashes, severe crashes and pedestrian crashes in this region. The primary objective of the study was to explore and investigate the effect of zonal variation (scale and zoning) on these specific types of crash models. These models were developed based on various roadway characteristics and census variables (e.g., land use, socio-economic, etc.).It was found that the significance of explanatory variables is not consistent among models based on different zoning systems. Although the difference in variable significance across geographic units was found, the results also show that the sign of the coefficients are reasonable and explainable in all models.Key findings of this study are, first, signs of coefficients are consistent if these variables are significant in models with same response variables, even if geographic units are different. Second, the number of significant variables is affected by response variables and also geographic units.Admittedly, TAZs are now the only traffic related zone system, thus TAZs are being widely used by transportation planners and frequently utilized in research related to macroscopic crash analysis. Nevertheless, considering that TAZs are not delineated for traffic crash analysis but they were designed for the long range transportation plans, TAZs might not be the optimal zone system for traffic crash modeling at the macroscopic level. Therefore, it recommended that other zone systems be explored for crash analysis as well.     

Real‐time identification of traffic conditions prone to injury and non‐injury crashes on freeways using genetic programming

This study applied the genetic programming (GP) model to identify traffic conditions prone to injury and property‐damage‐only (PDO) crashes in different traffic states on freeways. It was found that the traffic conditions prone to injury and PDO crashes can be classified into a high‐speed and a low‐speed traffic state. The random forest (RF) analyses were conducted to identify the contributing factors to injury and PDO crashes in these two traffic states. Four separate GP models were then developed to link the risks of injury and PDO crashes in two traffic states to the variables selected by the RF. An overall GP model was also developed for the combined dataset. It was found that the separate GP models that considered different traffic states and crash severity provided better predictive performance than the overall model, and the traffic flow variables that affected injury and PDO crashes were quite different across different traffic states. The proposed GP models were also compared with the traditional logistic regression models. The results suggested that the GP models outperformed the logistic regression models in terms of the prediction accuracy. More specifically, the GP models increased the prediction accuracy of injury crashes by 10.7% and 8.0% in the low‐speed and high‐speed traffic states. For PDO crashes, the GP models increased the prediction accuracy by 7.4% and 6.0% in the low‐speed and high‐speed traffic states. Copyright © 2016 John Wiley & Sons, Ltd.     

Accidents involving pedestrians with their backs to traffic or facing traffic: an evaluation of crash characteristics and injuries

This paper examines pedestrian anatomical injuries and crash characteristics in back‐to‐traffic and facing‐traffic crashes. Pedestrian crashes involving pedestrians walking along streets (i.e. with their backs to traffic or facing traffic) have been overlooked in literature. Although this is not the most frequent type of crash, the crash consequence to pedestrians is a safety concern. Combining Taiwan A1A2 police‐reported accident data and data from the National Health Insurance Database from years 2003–2013, this paper examines anatomical injuries and crash characteristics in back‐to‐traffic and facing‐traffic crashes. There were a total of 830 and 2267 pedestrian casualties in back‐to‐traffic and facing‐traffic crashes respectively. The injuries sustained by pedestrians and crash characteristics of these two crash types were compared with those of other crossing types of crashes (nearside crash, nearside dart‐out crash, offside crash, and offside dart‐out crash). Odds of various injuries to body regions were estimated using logistic regressions. Key findings include that the percentage of fatalities in back‐to‐traffic crashes is the highest; logistic models reveal that pedestrians in back‐to‐traffic crashes sustained more head, neck, and spinal injuries than did pedestrians in other crash types, and unlit darkness and non‐built‐up roadways were associated with an increased risk of pedestrian head injuries. Several crash features (e.g. unlit darkness, overtaking manoeuvres, phone use by pedestrians and drivers, and intoxicated drivers) are more frequently evident in back‐to‐traffic crashes than in other types of crashes. The current research suggests that in terms of crash consequence, facing traffic is safer than back to traffic. Copyright © 2016 John Wiley & Sons, Ltd.     

Congestion and safety: A spatial analysis of London

A disaggregate spatial analysis, using enumeration district data for London was conducted with the aim of examining how congestion may affect traffic safety. It has been hypothesized that while congested traffic conditions may increase the number of vehicle crashes and interactions, their severity is normally lower than crashes under uncongested free flowing conditions. This is primarily due to the slower speeds of vehicles when congestion is present. Our analysis uses negative binomial count models to examine whether factors affecting casualties (fatalities, serious injuries and slight injuries) differed during congested time periods as opposed to uncongested time periods. We also controlled for congestion spatially using a number of proxy variables and estimated pedestrian casualty models since a large proportion of London casualties are pedestrians. Results are not conclusive. Our results suggest that road infrastructure effects may interact with congestion levels such that in London any spatial differences are largely mitigated. Some small differences are seen between the models for congested versus uncongested time periods, but no conclusive trends can be found. Our results lead us to suspect that congestion as a mitigator of crash severity is less likely to occur in urban conditions, but may still be a factor on higher speed roads and motorways.     

Identification of freeway crash-prone traffic conditions for traffic flow at different levels of service

The primary objective of this study was to evaluate the risks of crashes associated with the freeway traffic flow operating at various levels of service (LOS) and to identify crash-prone traffic conditions for each LOS. The results showed that the traffic flow operating at LOS E had the highest crash potential, followed by LOS F and D. The traffic flow operating at LOS B and A had the lowest crash potential. For LOS A and B, the vehicle platoon and abrupt change in vehicle speeds were major contributing factors to crash occurrences. For LOS C, crash risks were correlated with lane-change maneuvers, speed variation, and small headways in traffic. For LOS D, crash risks increased with an increase in the temporal change in traffic flow variables and the frequency of lane-change maneuvers. For LOS E, crash risks were mainly affected by high traffic volumes and oscillating traffic conditions. For LOS F, crash risks increased with an increase in the standard deviation of flow rate and the frequency of lane-change maneuvers. The findings suggested that the mechanism of crashes were quite different across various LOS. A Bayesian random-parameters logistic regression model was developed to identify crash-prone traffic conditions for various LOS. The proposed model significantly improved the prediction performance as compared to the conventional logistic regression model.     

Severity of injury resulting from pedestrian–vehicle crashes: What can we learn from examining the built environment?

This paper examines the impact of personal and environmental characteristics on severity of injuries sustained in pedestrian–vehicle crashes using a generalized ordered probit model. The data covers 2000–2004 of pedestrian–vehicle crashes taken from police incident reports for Baltimore City and supplemented with local land use, urban form and transportation information specific to the individual crash locations. The results on personal and behavioral variables confirm previous findings. Women pedestrians involved in crashes tend to be injured less frequently than their male counterparts; children have an increased likelihood of sustaining injuries and older persons are more likely to be fatally injured. Pedestrians who cross against the traffic signal, are not in a crosswalk and are involved in a crash after dark are associated with greater injury risk. Of the built environment policy variables of interest, transit access and greater pedestrian connectivity, such as central city areas, are significant and negatively associated with injury severity. These results suggest that the environmental conditions should be given more scrutiny and be an important consideration when evaluating and planning for pedestrian safety.     

A dynamic Bayesian network model for real-time crash prediction using traffic speed conditions data

Traffic crashes occurring on freeways/expressways are considered to relate closely to previous traffic conditions, which are time-varying. Meanwhile, most studies use volume/occupancy/speed parameters to predict the likelihood of crashes, which are invalid for roads where the traffic conditions are estimated using speed data extracted from sampled floating cars or smart phones. Therefore, a dynamic Bayesian network (DBN) model of time sequence traffic data has been proposed to investigate the relationship between crash occurrence and dynamic speed condition data. Moreover, the traffic conditions near the crash site were identified as several state combinations according to the level of congestion and included in the DBN model. Based on 551 crashes and corresponding speed information collected on expressways in Shanghai, China, DBN models were built with time series speed condition data and different state combinations. A comparative analysis of the DBN model using flow detector data and a static Bayesian network model was also conducted. The results show that, with only speed condition data and nine traffic state combinations, the DBN model can achieve a crash prediction accuracy of 76.4% with a false alarm rate of 23.7%. In addition, the results of transferability testing imply that the DBN models are applicable to other similar expressways with 67.0% crash prediction accuracy.     

A method for relating type of crash to traffic flow characteristics on urban freeways

A method is developed to determine how crash characteristics are related to traffic flow conditions at the time of occurrence. Crashes are described in terms of the type and location of the collision, the number of vehicles involved, movements of these vehicles prior to collision, and severity. Traffic flow is characterized by central tendencies and variations of traffic flow and flow/occupancy for three different lanes at the time and place of the crash. The method involves nonlinear canonical correlation applied together with cluster analyses to identify traffic flow regimes with distinctly different crash taxonomies. A case study using data for more than 1000 crashes in Southern California identified twenty-one traffic flow regimes for three different ambient conditions: dry roads during daylight (eight regimes), dry roads at night (six regimes), and wet conditions (seven regimes). Each of these regimes has a unique profile in terms of the type of crashes that are most likely to occur, and a matching of traffic flow parameters and crash characteristics reveals ways in which congestion affects highway safety.     

Safety modeling for two‐way left‐turn lanes and a procedure to identify two‐way left‐turn lane segments with safety concerns

In the past, two‐way left‐turn lane (TWLTL) median treatments have been frequently used in Florida to inexpensively improve traffic and safety performances. In order to identify factors that may have significant impacts on safety operations in TWLTL sections and to identify TWLTL locations that present existing and future safety concerns, a research project was carried out and results are summarized in the paper. In the research, a three‐year crash history database with crashes and section characteristics from a total of 1688 TWLTL sections all over Florida was developed and used. A negative binomial regression model was developed to determine the statistical relationship between the number of crashes per mile per year and several variables such as traffic volume, access density, posted speed, and number of lanes. In regard to the methodology, in order to identify locations with safety concerns, several steps are needed: development of real crash data distribution, determination of statistical distribution models that better represent the actual crash data, determination of percentile values for the average number of crashes, estimation of crash rates for sections with the same characteristics, estimation of critical values for the variables corresponding to the percentile values for average number of crashes, calculation of tables of critical average annual daily traffic values, and generation of a list of TWLTL locations with critical safety concerns. Results presented in the paper have been used in real applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Factors contributing to the severity of intersection crashes

Road crashes are a leading cause of death and serious injuries both developed and developing countries. Intersections are recognized as being among the most hazardous locations on the roads. Although crashes at intersections form about 35 % of the reported accidents account for about 32% of traffic‐related serious injuries and fatalities in Singapore, there is no known study that examines the factors contributing to the severity of these crashes. In this study, the ordinal probit model was applied to crash data from 1992 to 2002 to investigate the role a variety of factors play in determining the severity of intersection crashes. Our study shows that vehicle type, road type, collision type, driver's characteristics and time of day are important determinants of the severity of crashes at intersections in Singapore.     

The joint analysis of injury severity of drivers in two-vehicle crashes accommodating seat belt use endogeneity

The current study contributes to the existing injury severity modeling literature by developing a multivariate probit model of injury severity and seat belt use decisions of both drivers involved in two-vehicle crashes. The modeling approach enables the joint modeling of the injury severity of multiple individuals involved in a crash, while also recognizing the endogeneity of seat belt use in predicting injury severity levels as well as accommodating unobserved heterogeneity in the effects of variables. The proposed model is applied to analyze the injury severity of drivers involved in two-vehicle road crashes in Denmark.The empirical analysis provides strong support for the notion that people offset the restraint benefits of seat belt use by driving more aggressively. Also, men and those individuals driving heavy vehicles have a lower injury risk than women and those driving lighter vehicles, respectively. At the same time, men and individuals driving heavy vehicles pose more of a danger to other drivers on the roadway when involved in a crash. Other important determinants of injury severity include speed limit on roadways where crash occurs, the presence (or absence) of center dividers (median barriers), and whether the crash involves a head-on collision. These and other results are discussed, along with implications for countermeasures to reduce injury severities in crashes. The analysis also underscores the importance of considering injury severity at a crash level, while accommodating seat belt endogeneity effects and unobserved heterogeneity effects.     

Accident severity analysis using ordered probit model

To reduce injuries in road crashes, better understanding is needed between the relationship of injury severity and risk factors. This study seeks to identify the contributing factors affecting crash severity with broad considerations of driver characteristics, roadway features, vehicle types, pedestrian characteristics and crash characteristics using an ordered probit model. It also explores how the interaction of these factors will affect accident severity risk. Three types of accidents were investigated: two-vehicle crashes, single vehicle crashes and pedestrian accidents. The reported crash data in Singapore from 1992 to 2001 were used to illustrate the process of parameter estimation. Several factors such as vehicle type, road type, collision type, location type, pedestrian age, time of day of accident occurrence were found to be significantly associated with injury severity. It was also found that injury severity decreases over time for the three types of accident investigated.     

A latent variable representation of count data models to accommodate spatial and temporal dependence: Application to predicting crash frequency at intersections

This paper proposes a reformulation of count models as a special case of generalized ordered-response models in which a single latent continuous variable is partitioned into mutually exclusive intervals. Using this equivalent latent variable-based generalized ordered response framework for count data models, we are then able to gainfully and efficiently introduce temporal and spatial dependencies through the latent continuous variables. Our formulation also allows handling excess zeros in correlated count data, a phenomenon that is commonly found in practice. A composite marginal likelihood inference approach is used to estimate model parameters. The modeling framework is applied to predict crash frequency at urban intersections in Arlington, Texas. The sample is drawn from the Texas Department of Transportation (TxDOT) crash incident files between 2003 and 2009, resulting in 1190 intersection-year observations. The results reveal the presence of intersection-specific time-invariant unobserved components influencing crash propensity and a spatial lag structure to characterize spatial dependence. Roadway configuration, approach roadway functional types, traffic control type, total daily entering traffic volumes and the split of volumes between approaches are all important variables in determining crash frequency at intersections.     

Assessment of the effects of highway geometric design features on the frequency of truck involved crashes using bivariate regression

Given the enormous losses to society resulting from large truck involved crashes, a comprehensive understanding of the effects of highway geometric design features on the frequency of truck involved crashes is needed. To better predict the occurrence probabilities of large truck involved crashes and gain direction for policies and countermeasures aimed at reducing the crash frequencies, it is essential to examine truck involved crashes categorized by collision vehicle types, since passenger cars and large trucks differ in dimensions, size, weight, and operating characteristics. A data set that includes a total of 1310 highway segments with 1787 truck involved crashes for a 4-year period, from 2004 to 2007 in Tennessee is employed to examine the effects that geometric design features and other relevant attributes have on the crash frequency. Since truck involved crash counts have many zeros (often 60–90% of all values) with small sample means and two established categories, car-truck and truck-only crashes, are not independent in nature, the zero-inflated negative binomial (ZINB) models are developed under the bivariate regression framework to simultaneously address the above mentioned issues. In addition, the bivariate negative binomial (BNB) and two individual univariate ZINB models are estimated for model validation. Goodness of fit of the investigated models is evaluated using AIC, SBC statistics, the number of identified significant variables, and graphs of observed versus expected crash frequencies. The bivariate ZINB (BZINB) models have been found to have desirable distributional property to describe the relationship between the large truck involved crashes and geometric design features in terms of better goodness of fit, more precise parameter estimates, more identified significant factors, and improved predictive accuracy. The results of BZINB models indicate that the following factors are significantly related to the likelihood of truck involved crash occurrences: large truck annual average daily traffic (AADT), segment length, degree of horizontal curvature, terrain type, land use, median type, lane width, right side shoulder width, lighting condition, rutting depth (RD), and posted speed limits. Apart from that, passenger car AADT, lane number, and indicator for different speed limits are found to have statistical significant effects on the occurrences of car-truck crashes and international roughness index (IRI) is significant for the predictions of truck-only crashes.     

Motorway crash duration and its determinants: do durations vary across motorways?

Traffic congestion has been a growing issue in many metropolitan areas during recent years, which necessitates the identification of its key contributors and development of sustainable strategies to help decrease its adverse impacts on traffic networks. Road incidents generally and crashes specifically have been acknowledged as the cause of a large proportion of travel delays in urban areas and account for 25% to 60% of traffic congestion on motorways. Identifying the critical determinants of travel delays has been of significant importance to the incident management systems, which constantly collect and store the incident duration data. This study investigates the individual and simultaneous differential effects of the relevant determinants on motorway crash duration probabilities. In particular, it applies parametric Accelerated Failure Time (AFT) hazard‐based models to develop in‐depth insights into how the crash‐specific characteristic and the associated temporal and infrastructural determinants impact the duration. AFT models with both fixed and random parameters have been calibrated on one year of traffic crash records from two major Australian motorways in South East Queensland, and the differential effects of determinants on crash survival functions have been studied on these two motorways individually. A comprehensive spectrum of commonly used parametric fixed parameter AFT models, including generalized gamma and generalized F families, has been compared with random parameter AFT structures in terms of goodness of fit to the duration data, and as a result, the random parameter Weibull AFT model has been selected as the most appropriate model. Significant determinants of motorway crash duration included traffic diversion requirement, crash injury type, number and type of vehicles involved in a crash, day of week and time of day, towing support requirement and damage to the infrastructure. A major finding of this research is that the motorways under study are significantly different in terms of crash durations; such that motorway 1 exhibits durations that are on average 19% shorter compared with the durations on motorway 2. The differential effects of explanatory variables on crash durations are also different on the two motorways. The detailed presented analysis confirms that looking at the motorway network as a whole, neglecting the individual differences between roads, can lead to erroneous interpretations of duration and inefficient strategies for mitigating travel delays along a particular motorway.     

Severity of pedestrian injuries due to traffic crashes at signalized intersections in Hong Kong: a Bayesian spatial logit model

The present study intended to (1) investigate the injury risk of pedestrian casualties involved in traffic crashes at signalized intersections in Hong Kong; (2) determine the effect of pedestrian volumes on the severity levels of pedestrian injuries; and (3) explore the role of spatial correlation in econometric crash‐severity models. The data from 1889 pedestrian‐related crashes at 318 signalized intersections between 2008 and 2012 were elaborately collected from the Traffic Accident Database System maintained by the Hong Kong Transport Department. To account for the cross‐intersection heterogeneity, a Bayesian hierarchical logit model with uncorrelated and spatially correlated random effects was developed. An intrinsic conditional autoregressive prior was specified for the spatial correlation term. Results revealed that (1) signalized intersections with greater pedestrian volumes generally exhibited a lower injury risk; (2) ignoring the spatial correlation potentially results in reduced model goodness‐of‐fit, an underestimation of variability and standard error of parameter estimates, as well as inconsistent, biased, and erroneous inference; (3) special attention should be paid to the following factors, which led to a significantly higher probability of pedestrians being killed or sustaining severe injury: pedestrian age greater than 65 years, casualties with head injuries, crashes that occurred on footpaths that were not obstructed/overcrowded, heedless or inattentive crossing, crashes on the two‐way carriageway, and those that occurred near tram or light‐rail transit stops. Copyright © 2017 John Wiley & Sons, Ltd.     

A multiple correspondence analysis of at‐fault motorcycle‐involved crashes in Alabama

According to the U.S. National Highway Traffic Safety Administration, in 2012, more than 4950 motorcyclists were killed in traffic accidents. Compared to passenger car occupants, mile for mile, motorcyclists are more than 26 times more at risk to dying in crashes. Due to the high fatality rate associated with motorcycle crashes, factors contributing to this type of crash must be identified in order to implement effective safety countermeasures. Given that the available datasets are large and complex, identifying the key factors contributing to crashes is a challenging task. Using multiple correspondence analysis, as an exploratory data analysis technique to determine the dataset structure, we identified the roadway/environmental, motorcycle, and motorcyclist‐related variables influencing at‐fault motorcycle‐involved crashes. This study used the latest available dataset (2009 to 2013) from the Critical Analysis Reporting Environment database to study motorcycle crashes in the state of Alabama. The most significant contributors to the frequency and severity of at‐fault motorcycle‐involved crashes were found to be light conditions, time of day, driver condition, and weather conditions. Copyright © 2017 John Wiley & Sons, Ltd.     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

Evaluation of variable speed limits to improve traffic safety

This paper examines automated control strategies of variable speed limits that aim at reducing crash potential on instrumented freeways. A real-time crash prediction model was developed to estimate crash potential based on short-term variation of traffic flow characteristics. A microscopic traffic simulation model was used to realistically simulate changes in traffic conditions as an effect of variable speed limits and combined with the crash prediction model for the evaluation of control logics. Within this integrated evaluation framework, the study investigated the effect of strategy control factors on the crash potential reduction and total travel time. The study results indicated that variable speed limits could reduce crash potential by 5–17%, by temporarily reducing speed limits during risky traffic conditions when crash potential exceeded the pre-specified threshold.