Nonlinear gating control for urban road traffic network using the network fundamental diagram

This work proposes a nonlinear model predictive controller for the urban gating problem. The system model is formalized based on a research on existing models of the network fundamental diagram and the perimeter control systems. For the existing models, modifications are suggested: additional state variables are allocated to describe the queue dynamics at the network gates. Using the extended model, a nonlinear model predictive controller is designed offering a ‘non‐greedy’ policy compared with previous, ‘greedy’ gating control designs. The greedy and non‐greedy nonlinear model predictive control (NMPC) controllers are compared with a greedy linear feedback proportional‐integral‐derivative (PID) controller in different traffic situations. The proposed non‐greedy NMPC controller outperforms the other two approaches in terms of travel distance performance and queue lengths. The performance results justify the consideration of queue lengths in dynamic modeling, and the use of NMPC approach for controller design. Copyright © 2014 John Wiley & Sons, Ltd.     

A model‐based demand‐balancing control for dynamically divided multiple urban subnetworks

Traffic control is an effective and efficient method for the problem of traffic congestion. It is necessary to design a high‐level controller to regulate the network traffic demands, because traffic congestion is not only caused by the improper management of the traffic network but also to a great extent caused by excessive network traffic demands. Therefore, we design a demand‐balance model predictive controller based on the macroscopic fundamental diagram‐based multi‐subnetwork model, which can optimize the network traffic mobility and the network traffic throughput by regulating the input traffic flows of the subnetworks. Because the transferring traffic flows among subnetworks are indirectly controlled and coordinated by the demand‐balance model predictive controller, the subnetwork division can variate dynamically according to real traffic states, and a global optimality can be achieved for the entire traffic network. The simulation results show the effectiveness of the proposed controller in improving the network traffic throughput. Copyright © 2016 John Wiley & Sons, Ltd.     

Dynamics of heterogeneity in urban networks: aggregated traffic modeling and hierarchical control

Real traffic data and simulation analysis reveal that for some urban networks a well-defined Macroscopic Fundamental Diagram (MFD) exists, which provides a unimodal and low-scatter relationship between the network vehicle density and outflow. Recent studies demonstrate that link density heterogeneity plays a significant role in the shape and scatter level of MFD and can cause hysteresis loops that influence the network performance. Evidently, a more homogeneous network in terms of link density can result in higher network outflow, which implies a network performance improvement. In this article, we introduce two aggregated models, region- and subregion-based MFDs, to study the dynamics of heterogeneity and how they can affect the accuracy scatter and hysteresis of a multi-subregion MFD model. We also introduce a hierarchical perimeter flow control problem by integrating the MFD heterogeneous modeling. The perimeter flow controllers operate on the border between urban regions, and manipulate the percentages of flows that transfer between the regions such that the network delay is minimized and the distribution of congestion is more homogeneous. The first level of the hierarchical control problem can be solved by a model predictive control approach, where the prediction model is the aggregated parsimonious region-based MFD and the plant (reality) is formulated by the subregion-based MFDs, which is a more detailed model. At the lower level, a feedback controller of the hierarchical structure, tries to maximize the outflow of critical regions, by increasing their homogeneity. With inputs that can be observed with existing monitoring techniques and without the need for detailed traffic state information, the proposed framework succeeds to increase network flows and decrease the hysteresis loop of the MFD. Comparison with existing perimeter controllers without considering the more advanced heterogeneity modeling of MFD highlights the importance of such approach for traffic modeling and control.     

Dynamic modeling and control of taxi services in large-scale urban networks: A macroscopic approach

Taxis are increasingly becoming a prominent mobility mode in many major cities due to their accessibility and convenience. The growing number of taxi trips and the increasing contribution of taxis to traffic congestion are cause for concern when vacant taxis are not distributed optimally within the city and are unable to find unserved passengers effectively. A way of improving taxi operations is to deploy a taxi dispatch system that matches the vacant taxis and waiting passengers while considering the search friction dynamics. This paper presents a network-scale taxi dispatch model that takes into account the interrelated impact of normal traffic flows and taxi dynamics while optimizing for an effective dispatching system. The proposed model builds on the concept of the macroscopic fundamental diagram (MFD) to represent the dynamic evolution of traffic conditions. The model considers multiple taxi service firms operating in a heterogeneously congested city, where the city is assumed to be partitioned into multiple regions each represented with a well-defined MFD. A model predictive control approach is devised to control the taxi dispatch system. The results show that lack of the taxi dispatching system leads to severe accumulation of unserved taxi passengers and vacant taxis in different regions whereas the dispatch system improves the taxi service performance and reduces traffic congestion by regulating the network towards the undersaturated condition. The proposed framework demonstrates sound potential management schemes for emerging mobility solutions such as fleet of automated vehicles and demand-responsive transit services.     

Multi-agent model predictive control of signaling split in urban traffic networks

The operation of large dynamic systems such as urban traffic networks remains a challenge in control engineering to a great extent due to their sheer size, intrinsic complexity, and nonlinear behavior. Recently, control engineers have looked for unconventional means for modeling and control of complex dynamic systems, in particular the technology of multi-agent systems whose appeal stems from their composite nature, flexibility, and scalability. This paper contributes to this evolving technology by proposing a framework for multi-agent control of linear dynamic systems, which decomposes a centralized model predictive control problem into a network of coupled, but small sub-problems that are solved by the distributed agents. Theoretical results ensure convergence of the distributed iterations to a globally optimal solution. The framework is applied to the signaling split control of traffic networks. Experiments conducted with simulation software indicate that the multi-agent framework attains performance comparable to conventional control. The main advantages of the multi-agent framework are its graceful extension and localized reconfiguration, which require adjustments only in the control strategies of the agents in the vicinity.     

Perimeter and boundary flow control in multi-reservoir heterogeneous networks

In this paper, we macroscopically describe the traffic dynamics in heterogeneous transportation urban networks by utilizing the Macroscopic Fundamental Diagram (MFD), a widely observed relation between network-wide space-mean flow and density of vehicles. A generic mathematical model for multi-reservoir networks with well-defined MFDs for each reservoir is presented first. Then, two modeling variations lead to two alternative optimal control methodologies for the design of perimeter and boundary flow control strategies that aim at distributing the accumulation in each reservoir as homogeneously as possible, and maintaining the rate of vehicles that are allowed to enter each reservoir around a desired point, while the system’s throughput is maximized. Based on the two control methodologies, perimeter and boundary control actions may be computed in real-time through a linear multivariable feedback regulator or a linear multivariable integral feedback regulator. Perimeter control occurs at the periphery of the network while boundary control occurs at the inter-transfers between neighborhood reservoirs. To this end, the heterogeneous network of San Francisco is partitioned into three homogeneous reservoirs and the proposed feedback regulators are compared with a pre-timed signal plan and a single-reservoir perimeter control strategy. Finally, the impact of the perimeter and boundary control actions is demonstrated via simulation by the use of the corresponding MFDs and other performance measures. A key advantage of the proposed approach is that it does not require high computational effort and future demand data if the current state of each reservoir can be observed with loop detector data.     

Agent-based network transmission model using the properties of macroscopic fundamental diagram

The field of research that has recently come to the fore is the perimeter control, which aims to control traffic demand for a large urban area prior to controlling internal flow inside the area. Such control concept needs to be tested by simulations, hence, it is necessary to develop a model that can appropriately estimate the network-wide flow dynamics. In this paper, agent-based network transmission model (ANTM) is proposed for describing the aggregated flow dynamics over an urban area of multiple large-scale networks. The proposed model is the combination of the cell transmission model (CTM), macroscopic fundamental diagram (MFD), and agent concept. The CTM-based simulation is adopted for the simplicity considering the computation requirements for real-time feasibility. The MFD concept is applied for representing the network properties, and a new approach is taken particularly for estimating network outflow affected by both demand patterns and boundary capacity. The agent concept is applied for representing drivers’ travel behaviors. The model is compared with microscopic simulations and shows reasonable accuracy for large areas. In addition, various travel direction choice behaviors are applicable to this model. Various perimeter control policies are applicable as well, thus, the proposed model can be a useful tool for testing various control methods, in terms of reducing the congestion in urban areas.     

A bi-objective bi-level signal control policy for transport of hazardous materials in urban road networks

A bi-objective bi-level signal control optimization for hazardous material (hazmat) transport is considered to assess trade-offs between travel cost and environment impacts such as public risk exposure. A least maxi-sum risk model with explicit signal delay is presented to determine generalized travel cost for hazmat carriers. Since the bi-level signal control problem is generally a non-convex program, a bundle method using generalized gradients is proposed. A bounding strategy is developed to stabilize solutions of the bi-level program and reduce relative gaps between iterations. Numerical comparisons are made with other risk-averse models. The results indicate that the proposed bi-objective bi-level model becomes even amiable to signal control policy makers since provides flexible solutions whilst is acceptable to carriers since takes account of travel delay at signal-controlled junctions. Moreover, the trade-offs between public risk and generalized travel costs are empirically investigated among different risk models with a variety of weights. As a result, the proposed model consistently exhibits highly considerable advantage on mitigation of public risk whilst incurred less cost loss as compared to other alternatives.     

Exploring the issue of integrating logistics and traffic control in urban areas

This paper proposes an optimization framework for urban transportation networks’ (re-)design which explicitly takes into account the specific decision-making processes of ordinary users and logistic operators. Ordinary users are typically commuters whose travels consist of well-defined pairs of origin and destination points, while logistic operators make deliveries at multiple locations. Obviously, these two user classes have different objectives and scopes of action. These differences are seldom considered in traffic research since most models aggregate the flow demand in OD matrices and use assignment models to predict the response of all users as if the dynamics of their optimization processes were of the same nature. This work demonstrates that better results can be achieved if the particular features of each user class are included in the models. It potentially improves the estimation of the responses and allows managers to shape their control measures to address specific user needs.