A rolling-horizon quadratic-programming approach to the signal control problem in large-scale congested urban road networks

The paper investigates the efficiency of a recently developed signal control methodology, which offers a computationally feasible technique for real-time network-wide signal control in large-scale urban traffic networks and is applicable also under congested traffic conditions. In this methodology, the traffic flow process is modeled by use of the store-and-forward modeling paradigm, and the problem of network-wide signal control (including all constraints) is formulated as a quadratic-programming problem that aims at minimizing and balancing the link queues so as to minimize the risk of queue spillback. For the application of the proposed methodology in real time, the corresponding optimization algorithm is embedded in a rolling-horizon (model-predictive) control scheme. The control strategy’s efficiency and real-time feasibility is demonstrated and compared with the Linear-Quadratic approach taken by the signal control strategy TUC (Traffic-responsive Urban Control) as well as with optimized fixed-control settings via their simulation-based application to the road network of the city centre of Chania, Greece, under a number of different demand scenarios. The comparative evaluation is based on various criteria and tools including the recently proposed fundamental diagram for urban network traffic.     

Network traffic control based on a mesoscopic dynamic flow model

The paper focuses on Network Traffic Control based on aggregate traffic flow variables, aiming at signal settings which are consistent with within-day traffic flow dynamics. The proposed optimisation strategy is based on two successive steps: the first step refers to each single junction optimisation (green timings), the second to network coordination (offsets). Both of the optimisation problems are solved through meta-heuristic algorithms: the optimisation of green timings is carried out through a multi-criteria Genetic Algorithm whereas offset optimisation is achieved with the mono-criterion Hill Climbing algorithm. To guarantee proper queuing and spillback simulation, an advanced mesoscopic traffic flow model is embedded within the network optimisation method. The adopted mesoscopic traffic flow model also includes link horizontal queue modelling. The results attained through the proposed optimisation framework are compared with those obtained through benchmark tools.     

Modeling and simulation of vehicle projection arrival–discharge process in adaptive traffic signal controls

Real‐time signal control operates as a function of the vehicular arrival and discharge process to satisfy a pre‐specified operational performance. This process is often predicted based on loop detectors placed upstream of the signal. In our newly developed signal control for diamond interchanges, a microscopic model is proposed to estimate traffic flows at the stop‐line. The model considers the traffic dynamics of vehicular detection, arrivals, and departures, by taking into account varying speeds, length of queues, and signal control. As the signal control is optimized over a rolling horizon that is divided into intervals, the vehicular detection for and projection into the corresponding horizon intervals are also modeled. The signal control algorithm is based on dynamic programming and the optimization of signal policy is performed using a certain performance measure involving delays, queue lengths, and queue storage ratios. The arrival–discharge model is embedded in the optimization algorithm and both are programmed into AIMSUN, a microscopic stochastic simulation program. AIMSUN is then used to simulate the traffic flow and implement the optimal signal control by accessing internal data including detected traffic demand and vehicle speeds. Sensitivity analysis is conducted to study the effect of selecting different optimization criteria on the signal control performance. It is concluded that the queue length and queue storage ratio are the most appropriate performance measures in real‐time signal control of interchanges. Copyright © 2010 John Wiley & Sons, Ltd.     

Optimizing signals for arterials experiencing heavy mixed scooter-vehicle flows

Recognizing the increasing popularity of scooters among urban commuters in developing countries and the significant impacts of their dynamic maneuverability on the progression of mixed traffic, this study presents a simulation-based signal optimization model for arterials experiencing heavy scooter-vehicle flows. The proposed model consists of a macroscopic simulation and a signal optimization module, where the former functions to capture the interactions between scooter and passenger-car flows over the process of discharging, propagation, and formation of intersection queues. The latter offers a specially-designed algorithm to search for the optimal signal plan and arterial offsets, based on the complex departure and arrival patterns of mixed flows estimated with the simulation module. To account for scooters’ unique parallel moving and queue patterns in a travel lane, the proposed signal module has adopted the sub-lane concept in estimating the mixed-flow queue distribution across lanes and their discharging flow rates. The results of extensive experimental analyses with various mixed-flow scenarios confirm that the proposed model offers the potential for signal design for arterials plagued by heavy scooter-vehicle mixed flows.     

A bi-level model of dynamic traffic signal control with continuum approximation

This paper proposes a bi-level model for traffic network signal control, which is formulated as a dynamic Stackelberg game and solved as a mathematical program with equilibrium constraints (MPEC). The lower-level problem is a dynamic user equilibrium (DUE) with embedded dynamic network loading (DNL) sub-problem based on the LWR model (Lighthill and Whitham, 1955; Richards, 1956). The upper-level decision variables are (time-varying) signal green splits with the objective of minimizing network-wide travel cost. Unlike most existing literature which mainly use an on-and-off (binary) representation of the signal controls, we employ a continuum signal model recently proposed and analyzed in Han et al. (2014), which aims at describing and predicting the aggregate behavior that exists at signalized intersections without relying on distinct signal phases. Advantages of this continuum signal model include fewer integer variables, less restrictive constraints on the time steps, and higher decision resolution. It simplifies the modeling representation of large-scale urban traffic networks with the benefit of improved computational efficiency in simulation or optimization. We present, for the LWR-based DNL model that explicitly captures vehicle spillback, an in-depth study on the implementation of the continuum signal model, as its approximation accuracy depends on a number of factors and may deteriorate greatly under certain conditions. The proposed MPEC is solved on two test networks with three metaheuristic methods. Parallel computing is employed to significantly accelerate the solution procedure.     

Traffic signal timing problems with environmental and equity considerations

Traffic signal timings in a road network can not only affect total user travel time and total amount of traffic emissions in the network but also create an inequity problem in terms of the change in travel costs of users traveling between different locations. This paper proposes a multi‐objective bi‐level programming model for design of sustainable and equitable traffic signal timings for a congested signal‐controlled road network. The upper level of the proposed model is a multi‐objective programming problem with an equity constraint that maximizes the reserve capacity of the network and minimizes the total amount of traffic emissions. The lower level is a deterministic network user equilibrium problem that considers the vehicle delays at signalized intersections of the network. To solve the proposed model, an approach for normalizing incommensurable objective functions is presented, and a heuristic solution algorithm that combines a penalty function approach and a simulated annealing method is developed. Two numerical examples are presented to show the effects of reserve capacity improvement and green time proportion on network flow distribution and transportation system performance and the importance of incorporating environmental and equity objectives in the traffic signal timing problems. Copyright © 2013 John Wiley & Sons, Ltd.     

Integrated optimization of bus priority operations in connected vehicle environment

Most previous works associated with transit signal priority merely focus on the optimization of signal timings, ignoring both bus speed and dwell time at bus stops. This paper presents a novel approach to optimize the holding time at bus stops, signal timings, and bus speed to provide priority to buses at isolated intersections. The objective of the proposed model is to minimize the weighted average vehicle delays of the intersection, which includes both bus delay and impact on nearby intersection traffic, ensuring that buses clear these intersections without being stopped by a red light. A set of formulations are developed to explicitly capture the interaction between bus speed, bus holding time, and transit priority signal timings. Experimental analysis is used to show that the proposed model has minimal negative impacts on general traffic and outperforms the no priority, signal priority only, and signal priority with holding control strategies (no bus speed adjustment) in terms of reducing average bus delays and stops. A sensitivity analysis further demonstrates the potential of the proposed approach to be applied to bus priority control systems in real‐time under different traffic demands, bus stop locations, and maximum speed limits. Copyright © 2016 John Wiley & Sons, Ltd.     

Traffic conflict models to evaluate the safety of signalized intersections at the cycle level

The safety of signalized intersections has often been evaluated at an aggregate level relating collisions to annual traffic volume and the geometric characteristics of the intersection. However, for many safety issues, it is essential to understand how changes in traffic parameters and signal control affect safety at the signal cycle level. This paper develops conflict-based safety performance functions (SPFs) for signalized intersections at the signal cycle level. Traffic video-data was recorded for six signalized intersections located in two cities in Canada. A video analysis procedure is proposed to collect rear-end conflicts and various traffic variables at each signal cycle from the recorded videos. The traffic variables include: traffic volume, maximum queue length, shock wave characteristics (e.g. shock wave speed and shock wave area), and the platoon ratio. The SPFs are developed using the generalized linear models (GLM) approach. The results show that all models have good fit and almost all the explanatory variables are statistically significant leading to better prediction of conflict occurrence beyond what can be expected from the traffic volume only. Furthermore, space-time conflict heat maps are developed to investigate the distribution of the traffic conflicts. The heat maps illustrate graphically the association between rear-end conflicts and various traffic parameters. The developed models can give insight about how changes in the signal cycle design affect the safety of signalized intersections. The overall goal is to use the developed models for the real-time optimization of signalized intersection safety by changing the signal design.     

Fuzzy-logic-based incident detection for signalized diamond interchanges

This paper documents a fuzzy-logic-based incident detection algorithm for signalized urban diamond interchanges. The model is capable of detecting lane-blocking incidents whose effects are manifested by patterns of deterioration in traffic conditions that require adjustments in signal control strategies. As a component of a real-time traffic adaptive control system for signalized diamond interchanges, the algorithm feeds an incident report (i.e., the time, location, and severity of the incident) to the system's optimization manager, which uses that information to determine the appropriate signal control strategy.The performance of the model was studied using a simulation of an actual diamond interchange. The simulation study evaluated the model's performance in terms of detection rate, false alarm rate, and mean time to detect. The model's performance was encouraging, and the fuzzy-logic-based approach is considered promising.     

A real-time adaptive signal control in a connected vehicle environment

The state of the practice traffic signal control strategies mainly rely on infrastructure based vehicle detector data as the input for the control logic. The infrastructure based detectors are generally point detectors which cannot directly provide measurement of vehicle location and speed. With the advances in wireless communication technology, vehicles are able to communicate with each other and with the infrastructure in the emerging connected vehicle system. Data collected from connected vehicles provides a much more complete picture of the traffic states near an intersection and can be utilized for signal control. This paper presents a real-time adaptive signal phase allocation algorithm using connected vehicle data. The proposed algorithm optimizes the phase sequence and duration by solving a two-level optimization problem. Two objective functions are considered: minimization of total vehicle delay and minimization of queue length. Due to the low penetration rate of the connected vehicles, an algorithm that estimates the states of unequipped vehicle based on connected vehicle data is developed to construct a complete arrival table for the phase allocation algorithm. A real-world intersection is modeled in VISSIM to validate the algorithms. Results with a variety of connected vehicle market penetration rates and demand levels are compared to well-tuned fully actuated control. In general, the proposed control algorithm outperforms actuated control by reducing total delay by as much as 16.33% in a high penetration rate case and similar delay in a low penetration rate case. Different objective functions result in different behaviors of signal timing. The minimization of total vehicle delay usually generates lower total vehicle delay, while minimization of queue length serves all phases in a more balanced way.     

Repeated anticipatory network traffic control using iterative optimization accounting for model bias correction

Anticipatory signal control in traffic networks adapts the signal timings with the aim of controlling the resulting (equilibrium) flows and route choice patterns in the network. This study investigates a method to support control decisions for successful applications in real traffic systems that operate repeatedly, for instance from day to day, month to month, etc. The route choice response to signal control is usually predicted through models; however this leads to suboptimality because of unavoidable prediction errors between model and reality. This paper proposes an iterative optimizing control method to drive the traffic network towards the real optimal performance by observing modeling errors and correcting for them. Theoretical analysis of this Iterative Optimizing Control with Model Bias Correction (IOCMBC) on matching properties between the modeled optimal solution and the real optimum is presented, and the advantages over conventional iterative schemes are demonstrated. A local convergence analysis is also elaborated to investigate conditions required for a convergent scheme. The main innovation is the calculation of the sensitivity (Jacobian) information of the real route choice behavior with respect to signal control variables. To avoid performing additional perturbations, we introduce a measurement-based implementation method for estimating the operational Jacobian that is associated with the reality. Numerical tests confirm the effectiveness of the proposed IOCMBC method in tackling modeling errors, as well as the influence of the optimization step size on the reality-tracking convergence.     

Real-time merging traffic control for throughput maximization at motorway work zones

Work zones on motorways necessitate the drop of one or more lanes which may lead to significant reduction of traffic flow capacity and efficiency, traffic flow disruptions, congestion creation, and increased accident risk. Real-time traffic control by use of green–red traffic signals at the motorway mainstream is proposed in order to achieve safer merging of vehicles entering the work zone and, at the same time, maximize throughput and reduce travel delays. A significant issue that had been neglected in previous research is the investigation of the impact of distance between the merge area and the traffic lights so as to achieve, in combination with the employed real-time traffic control strategy, the most efficient merging of vehicles. The control strategy applied for real-time signal operation is based on an ALINEA-like proportional–integral (PI-type) feedback regulator. In order to achieve maximum performance of the control strategy, some calibration of the regulator’s parameters may be necessary. The calibration is first conducted manually, via a typical trial-and-error procedure. In an additional investigation, the recently proposed learning/adaptive fine-tuning (AFT) algorithm is employed in order to automatically fine-tune the regulator parameters. Experiments conducted with a microscopic simulator for a hypothetical work zone infrastructure, demonstrate the potential high benefits of the control scheme.     

Evaluating the impacts of urban corridor traffic signal optimization on vehicle emissions and fuel consumption

This study investigates the impacts of traffic signal timing optimization on vehicular fuel consumption and emissions at an urban corridor. The traffic signal optimization approach proposed integrates a TRANSIMS microscopic traffic simulator, the VT-Micro model (a microscopic emission and fuel consumption estimation model), and a genetic algorithm (GA)-based optimizer. An urban corridor consisting of four signalized intersections in Charlottesville, VA, USA, is used for a case study. The result of the case study is then compared with the best traffic signal timing plan generated by Synchro using the TRANSIMS microscopic traffic simulator. The proposed approach achieves much better performance than that of the best Synchro solution in terms of air quality, energy and mobility measures: 20% less network-wide fuel consumption, 8–20% less vehicle emissions, and nearly 27% less vehicle-hours-traveled (VHT).     

A dual control approach for repeated anticipatory traffic control with estimation of network flow sensitivity

This paper investigates a strategic signal control, which anticipates travelers' route choice response and determines signal timings to optimize network‐wide objectives. In general traffic assignment models are used for anticipating this route choice response. However, model‐reality mismatch usually brings suboptimal solutions to the real system. A repeated anticipatory control resolves the suboptimality and addresses the modeling error by learning from information on model bias. This paper extends the repeated control approach and focuses on the estimation of flow sensitivity as well as its influence on control, which is a crucial issue in implementation of model bias correction. The main objective of this paper is first to analyze the estimation error in the real flow derivative that is estimated from noisy measurements. A dual control method is then presented, improving both optimization objective function and derivative estimation during the control process. The proposed dual algorithm is tested on a simple network as well as on a midsize network. Numerical examples confirm the reliable performance of the new reality‐tracking control strategy and its ability to identify (local) optimal solutions on real traffic networks. Copyright © 2016 John Wiley & Sons, Ltd.     

Dynamic traffic routing in a network with adaptive signal control

In real traffic networks, travellers’ route choice is affected by traffic control strategies. In this research, we capture the interaction between travellers’ route choice and traffic signal control in a coherent framework. For travellers’ route choice, a VANET (Vehicular Ad hoc NETwork) is considered, where travellers have access to the real-time traffic information through V2V/V2I (Vehicle to Vehicle/Vehicle to Infrastructure) infrastructures and make route choice decisions at each intersection using hyper-path trees. We test our algorithm and control strategy by simulation in OmNet++ (A network communication simulator) and SUMO (Simulation of Urban MObility) under several scenarios. The simulation results show that with the proposed dynamic routing, the overall travel cost significantly decreases. It is also shown that the proposed adaptive signal control reduces the average delay effectively, as well as reduces the fluctuation of the average speed within the whole network.     

“互联网+”交通信号辅助优化机制探索

为优化城市道路交通信号控制方法,本文结合交通信号控制系统建设发展现状,分析当前各大城市交通信号控制系统普遍存在的问题,立足于互联网环境下的浮动车数据,提出基于互联网平台大数据的交通信号控制辅助优化机制。研究发现可利用互联网路口拥堵报警数据及时有效发现问题路口,利用路段拥堵指数及路口交通流参数变化趋势辅助评估配时方案的优化效果,并通过成都市应用实例证明该机制适用于当前交通控制场景需求,可有效辅助交通信号优化工作,是传统交通模式向真正智能交通模式过渡的阶梯。     

International comparative field evaluation of a traffic-responsive signal control strategy in three cities

The recently developed network-wide real-time signal control strategy TUC has been implemented in three traffic networks with quite different traffic and control infrastructure characteristics: Chania, Greece (23 junctions); Southampton, UK (53 junctions); and Munich, Germany (25 junctions), where it has been compared to the respective resident real-time signal control strategies TASS, SCOOT and BALANCE. After a short outline of TUC, the paper describes the three application networks; the application, demonstration and evaluation conditions; as well as the comparative evaluation results. The main conclusions drawn from this high-effort inter-European undertaking is that TUC is an easy-to-implement, inter-operable, low-cost real-time signal control strategy whose performance, after very limited fine-tuning, proved to be better or, at least, similar to the ones achieved by long-standing strategies that were in most cases very well fine-tuned over the years in the specific networks.     

An extended coordinate descent method for distributed anticipatory network traffic control

Anticipatory optimal network control can be defined as the practice of determining the set of control actions that minimizes a network-wide objective function, so that the consequences of this action are taken in consideration not only locally, on the propagation of flows, but globally, taking into account the user’s routing behavior. Such an objective function is, in general, defined and optimized in a centralized setting, as knowledge regarding the whole network is needed in order to correctly compute it. This is a strong theoretical framework but, in practice, reaching a level of centralization sufficient to achieve said optimality is very challenging. Furthermore, even if centralization was possible, it would exhibit several shortcomings, with concerns such as computational speed (centralized optimization of a huge control set with a highly nonlinear objective function), reliability and communication overhead arising.The main aim of this work is to develop a decomposed heuristic descent algorithm that, demanding the different control entities to share the same information set, attains network-wide optimality through separate control actions.     

A sensitivity-based approach for adaptive decomposition of anticipatory network traffic control

Anticipatory optimal network control is defined as the problem of determining the set of control actions that minimizes a network-wide objective function. This not only takes into account local consequences on the propagation of flows, but also the global network-wide routing behavior of the users. Such an objective function is, in general, defined in a centralized setting, as knowledge regarding the whole network is needed to correctly compute it. Reaching a level of centralization sufficient to attain network-wide control objectives is however rarely realistic in practice. Multiple authorities are influencing different portions the network, separated either hierarchically or geographically. The distributed nature of networks and traffic directly influences the complexity of the anticipatory control problem.This is our motivation for this work, in which we introduce a decomposition mechanism for the global anticipatory network traffic control problem, based on dynamic clustering of traffic controllers. Rather than solving the full centralized problem, or blindly performing a full controller-wise decomposition, this technique allows recognizing when and which controllers should be grouped in clusters, and when, instead, these can be optimized separately.The practical relevance with respect to our motivation is that our approach allows identification of those network traffic conditions in which multiple actors need to actively coordinate their actions, or when unilateral action suffices for still approximating global optimality.This clustering procedure is based on well-known algebraic and statistical tools that exploit the network’s sensitivity to control and its structure to deduce coupling behavior. We devise several case studies in order to assess our newly introduced procedure’s performances, in comparison with fully decomposed and fully centralized anticipatory optimal network control, and show that our approach is able to outperform both centralized and decomposed procedures.     

Data-driven linear decision rule approach for distributionally robust optimization of on-line signal control

We propose a two-stage, on-line signal control strategy for dynamic networks using a linear decision rule (LDR) approach and a distributionally robust optimization (DRO) technique. The first (off-line) stage formulates a LDR that maps real-time traffic data to optimal signal control policies. A DRO problem is solved to optimize the on-line performance of the LDR in the presence of uncertainties associated with the observed traffic states and ambiguity in their underlying distribution functions. We employ a data-driven calibration of the uncertainty set, which takes into account historical traffic data. The second (on-line) stage implements a very efficient linear decision rule whose performance is guaranteed by the off-line computation. We test the proposed signal control procedure in a simulation environment that is informed by actual traffic data obtained in Glasgow, and demonstrate its full potential in on-line operation and deployability on realistic networks, as well as its effectiveness in improving traffic.