Automotive Steering Control in a Split-µ Manoeuvre Using an Observer-Based Sliding Mode Controller

Summary In this paper a sliding mode integral action controller and sliding mode observer are used to enhance vehicle stability in a split- µ manoeuvre. Anti-lock braking systems (ABS) have become an integral part of modern cars, and they have dramatically improved vehicle handling in braking manoeuvres. However, when a vehicle attempts to brake on a surface with uneven friction coefficient such as on wet or icy roads, a so-called split- µ scenario, the yaw moment generated by the asymmetric braking can prove demanding for an inexperienced driver. The controller presented hereworks in conjunction with a conventional ABS system to provide safe and effective braking through steer-by-wire. This paper extends previous state-feedback work by only using certain measurable quantities in the controller, estimating further signals by employing an observer.     

Sliding mode observers for vehicle mode detection

This paper explores the use of sliding mode observers to detect the onset of potentially dangerous vehicle modes such as oversteer, understeer or split-μ braking. Provided these modes can be detected quickly enough, existing stability controllers can be engaged to ensure safe performance of the vehicle. It is shown that the equivalent output error injection signals associated with the sliding mode observer have distinctive signatures depending on the particular mode encountered. Appropriate thresholds on these signals can be set so the scheme ignores variations which arise during normal driving, but can detect and isolate different undesirable vehicle modes within 0.3 seconds of their onset.     

汽车ABS滑模变结构控制的分析与仿真

汽车防抱制动系统(ABS)是改善汽车主动安全性的重要装置.本文介绍了滑模变结构控制方法,针对汽车ABS的特点利用此方法设计了控制器,并在MATLAB/Simulink的环境下进行了仿真,给出了仿真结果和评价.     

A Sliding Mode Controller for Wheel Slip Ratio Control System

A sliding mode controller has been developed for a wheel slip ratio control system for commercial vehicles with sluggish braking actuators to replace conventional if-then rule-like ABS control laws. New techniques overcome the tendency of sliding mode controllers to chatter. Computer simulation (hardware-in-the-loop simulation) and actual vehicle tests verified the effectiveness of this method to suppress chattering and keep the wheel slip ratio in a desirable range during braking on low-friction road surfaces.     

Design of a hydraulic anti-lock braking modulator and an intelligent brake pressure controller for a light motorcycle

The object of this paper is to design a new hydraulic modulator and an intelligent sliding mode pulse width modulation (PWM) brake pressure controller for an anti-lock braking system, for application to light motorcycles. The paper presents a design principle and a mathematical analysis of the hydraulic anti-lock braking modulator. The intelligent sliding mode PWM brake pressure controller based on vehicle acceleration is designed and tested. A three-phase pavement experiment and a rear brake influence test are undertaken to verify the performance of the controller and the modulator. A light motorcycle is built for the real vehicle anti-lock braking experiments. The experimental results show that both the intelligent controller and the hydraulic modulator designed in the study perform well in the anti-lock braking operation.     

汽车防抱死制动系统的自抗扰控制研究

汽车防抱死制动系统(Anti-lock Braking System,ABS)的作用是确保汽车制动时行驶方向的稳定性、可靠性,但是目前仍存在非线性、时变性以及参数不确定性等问题.为保证汽车制动行驶过程中的操纵稳定性和安全性,进一步实现各工况下防抱死制动系统的优化控制,以影响整车稳定的变量滑移率为研究对象,分析所设计策略...     

Sliding mode observers for vehicle mode detection

This paper explores the use of sliding mode observers to detect the onset of potentially dangerous vehicle modes such as oversteer, understeer or split-μ braking. Provided these modes can be detected quickly enough, existing stability controllers can be engaged to ensure safe performance of the vehicle. It is shown that the equivalent output error injection signals associated with the sliding mode observer have distinctive signatures depending on the particular mode encountered. Appropriate thresholds on these signals can be set so the scheme ignores variations which arise during normal driving, but can detect and isolate different undesirable vehicle modes within 0.3 seconds of their onset.     

A practical identifier design of road variations for anti-lock brake system

Emergency brake technologies have always been a major interest of vehicle active safety-related studies. On homogeneous surfaces, traditional anti-lock brake system (ABS) can achieve efficient braking performance and maintain the handling capability as well. However, when road conditions are time variant during the braking process, or different at the bilateral wheels, braking stability performance is likely to be degraded. To address this problem and enhance ABS performances, a practical identifier of road variations is developed in this study. The proposed identifier adopts a statechart-based approach and is hierarchically constructed with a wheel layer and a full vehicle layer identifier. Based on the identification results, modifications are made to a four-phase wheel-behaviour-based ABS controller to enhance its performance. The feasibility and effectiveness of the proposed identifier in collaborating with the modified ABS controller are examined via simulations and further validated by track tests under various practical braking scenarios.     

Improvement of drivability and fuel economy with a hybrid antiskid braking system in hybrid electric vehicles

When braking on wet roads, Antilock Braking System (ABS) control can be triggered because the available brake torque is not sufficient. When the ABS system is active, for a hybrid electric vehicle, the regenerative brake is switched off to safeguard the normal ABS function. When the ABS control is terminated, it would be favorable to reactivate the regenerative brake. However, recurring cycles from ABS to motor regenerative braking could occur. This condition is felt to be unpleasant by the driver and has adverse effects on driving stability. In this paper, a novel hybrid antiskid braking system using fuzzy logic is proposed for a hybrid electric vehicle that has a regenerative braking system operatively connected to an electric traction motor and a separate hydraulic braking system. This control strategy and the method for coordination between regenerative and hydraulic braking are developed. The motor regenerative braking controller is designed. Control of regenerative and hydraulic braking force distribution is investigated. The simulation and experimental results show that vehicle braking performance and fuel economy can be improved and the proposed control strategy and method are effective and robust.     

Transient switching control strategy from regenerative braking to anti-lock braking with a semi-brake-by-wire system

Regenerative braking is an important technology in improving fuel economy of an electric vehicle (EV). However, additional motor braking will change the dynamic characteristics of the vehicle, leading to braking instability, especially when the anti-lock braking system (ABS) is triggered. In this paper, a novel semi-brake-by-wire system, without the use of a pedal simulator and fail-safe device, is proposed. In order to compensate for the hysteretic characteristics of the designed brake system while ensure braking reliability and fuel economy when the ABS is triggered, a novel switching compensation control strategy using sliding mode control is brought forward. The proposed strategy converts the complex coupling braking process into independent control of hydraulic braking and regenerative braking, through which a balance between braking performance, braking reliability, braking safety and fuel economy is achieved. Simulation results show that the proposed strategy is effective and adaptable in different road conditions while the large wheel slip rate is triggered during a regenerative braking course. The research provides a new possibility of low-cost equipment and better control performance for the regenerative braking in the EV and the hybrid EV.     

State observer-based sliding mode control for semi-active hydro-pneumatic suspension

This paper proposes an improved virtual reference model for semi-active suspension to coordinate the vehicle ride comfort and handling stability. The reference model combines the virtues of sky-hook with ground-hook control logic, and the hybrid coefficient is tuned according to the longitudinal and lateral acceleration so as to improve the vehicle stability especially in high-speed condition. Suspension state observer based on unscented Kalman filter is designed. A sliding mode controller (SMC) is developed to track the states of the reference model. The stability of the SMC strategy is proven by means of Lyapunov function taking into account the nonlinear damper characteristics and sprung mass variation of the vehicle. Finally, the performance of the controller is demonstrated under three typical working conditions: the random road excitation, speed bump road and sharp acceleration and braking. The simulation results indicated that, compared with the traditional passive suspension, the proposed control algorithm can offer a better coordination between vehicle ride comfort and handling stability. This approach provides a viable alternative to costlier active suspension control systems for commercial vehicles.     

On the Experimental Analysis of Integral Sliding Modes for Yaw Rate and Sideslip Control of an Electric Vehicle with Multiple Motors

With the advent of electric vehicles with multiple motors, the steady-state and transient cornering responses can be designed and implemented through the continuous torque control of the individual wheels, i.e., torque-vectoring or direct yaw moment control. The literature includes several papers on sliding mode control theory for torque-vectoring, but the experimental investigation is so far limited. More importantly, to the knowledge of the authors, the experimental comparison of direct yaw moment control based on sliding modes and typical controllers used for stability control in production vehicles is missing. This paper aims to reduce this gap by presenting and analyzing an integral sliding mode controller for concurrent yaw rate and sideslip control. A new driving mode, the Enhanced Sport mode, is proposed, inducing sustained high values of sideslip angle, which can be limited to a specified threshold. The system is experimentally assessed on a four-wheel-drive electric vehicle. The performance of the integral sliding mode controller is compared with that of a linear quadratic regulator during step steer tests. The results show that the integral sliding mode controller significantly enhances the tracking performance and yaw damping compared to the more conventional linear quadratic regulator based on an augmented singletrack vehicle model formulation.     

无人驾驶机器人车辆非线性模糊滑模车速控制

为了实现不同行驶工况下车速的精确、稳定控制,提出一种基于非线性干扰观测器的无人驾驶机器人车辆模糊滑模车速控制方法。考虑模型不确定性和外部干扰对车速控制的影响,建立车辆纵向动力学模型。通过分析无人驾驶机器人油门机械腿、制动机械腿的结构、机械腿操纵自动挡车辆踏板的运动,建立油门机械腿和制动机械腿的运动学模型。在此基础上,分别设计油门/制动切换控制器、油门模糊滑模控制器以及制动模糊滑模控制器,并进行控制系统的稳定性分析。油门/制动切换控制器以目标车速的导数为输入来进行油门与制动之间的切换控制。油门模糊滑模控制器和制动模糊滑模控制器以当前车速以及车速误差为输入,分别以油门机械腿直线电机位移和制动机械腿直线电机位移为输出来实现对油门与制动的控制。模糊滑模控制器中,为了减少控制抖振,滑模控制的反馈增益系数由模糊逻辑进行在线调节。模糊滑模控制器中的非线性干扰观测器用于估计和补偿无人驾驶机器人车辆的模型不确定性与外部干扰。仿真及试验结果对比分析表明：本文方法能够精确地估计和补偿无人驾驶机器人车辆的模型不确定性和外部干扰,避免了油门控制与制动控制之间的频繁切换,并实现了精确稳定的车速控制。     

Using µ Feedforward for Vehicle Stability Enhancement

A differential braking control strategy using yaw rate feedback, coupled with µ feedforward is introduced for a vehicle cornering on different µ roads. A nonlinear 4-wheel car model is developed. A desired yaw rate is calculated from the reference model based on the driver steering input. It is shown that knowledge of µ offers significant improvement of the vehicle desired trajectory over that of a yaw rate controller alone. Uncertainties and time delay in estimating µ are shown to still yield a system that is superior to using no µ information at all.     

Vehicle dynamic stability improvements through gain-scheduled steering and braking control

This paper is concerned with the synthesis of a robust gain-scheduled ?_∞ MIMO vehicle dynamic stability controller (VDSC) involving both steering and rear braking actuators. This VDSC aims at improving automotive vehicle yaw stability and lateral performances. The aim of this work is to provide a methodology to synthesise such a controller while taking into account the braking actuator limitations and use the steering actuator only if it is necessary. These objectives are treated in an original way by the synthesis of a parameter-dependent controller built in the LPV framework and by the solution of an LMI problem. The proposed solution is coupled with a local ABS strategy to guarantee slip stability and make the solution complete. Nonlinear time and frequency domain simulations on a complex full vehicle model (which has been validated on a real car), subject to critical driving situations, show the efficiency and robustness of the proposed solution.     

基于滑模自抗扰的电制动系统动态负载模拟

为精准模拟传动系弹性及齿隙作用下电制动系统非线性机械负载,提出了自适应模糊滑模自抗扰的测功机控制算法。首先,针对一款前驱电动汽车,建立融合感应电机模型的车辆及台架机电一体化模型,引入典型正常制动和防抱死制动控制作为测试对象。其次,构建扩张状态观测器估计台架系统未建模动态,以自适应模糊滑模控制测功机实时模拟高度非线性机械负载。最后,开展了制动控制策略台架测试的仿真研究。结果表明:提出的方法可精确模拟电制动系统动态负载,有效提高制动控制算法台架测试精度。     

Control of Wheel Slip Ratio Using Sliding Mode Controller with Pulse Width Modulation

For the control of anti-lock brake system (ABS), a longitudinal four-wheel vehicle model with brake actuator is described and a sliding mode controller with pulse width modulation (PWM) method has been developed for passenger vehicles. In our research, we introduce actuator dynamics of solenoid-solenoid valve type in system equation and derive the sliding mode control input theoretically. We propose using PWM method to compensate for the discrete nature of actuator dynamics by duty control. The effectiveness of the proposed control algorithms was confirmed by vehicle test on an in-door test bench that was specially constructed for the purpose concerned.     

Control of Wheel Slip Ratio Using Sliding Mode Controller with Pulse Width Modulation

For the control of anti-lock brake system (ABS), a longitudinal four-wheel vehicle model with brake actuator is described and a sliding mode controller with pulse width modulation (PWM) method has been developed for passenger vehicles. In our research, we introduce actuator dynamics of solenoid-solenoid valve type in system equation and derive the sliding mode control input theoretically. We propose using PWM method to compensate for the discrete nature of actuator dynamics by duty control. The effectiveness of the proposed control algorithms was confirmed by vehicle test on an in-door test bench that was specially constructed for the purpose concerned.     

基于视觉识别的线控制动压力滑模控制

制动安全是车辆主动安全的关键技术之一.制动决策和执行器控制是影响线控制动系统性能的两个主要因素.路面自适应性和控制器鲁棒性分别对制动决策和执行器控制有着重要影响,制约着线控制动系统的发展.本文中以一种液压调控的线控制动系统为基础,针对路面自适应性和控制器鲁棒性问题,提出一种双层结构的制动系统控制器,上层采用计算机视觉的...     

A vehicle ABS adaptive sliding-mode control algorithm based on the vehicle velocity estimation and tyre/road friction coefficient estimations

A sliding-mode observer is designed to estimate the vehicle velocity with the measured vehicle acceleration, the wheel speeds and the braking torques. Based on the Burckhardt tyre model, the extended Kalman filter is designed to estimate the parameters of the Burckhardt model with the estimated vehicle velocity, the measured wheel speeds and the vehicle acceleration. According to the estimated parameters of the Burckhardt tyre model, the tyre/road friction coefficients and the optimal slip ratios are calculated. A vehicle adaptive sliding-mode control (SMC) algorithm is presented with the estimated vehicle velocity, the tyre/road friction coefficients and the optimal slip ratios. And the adjustment method of the sliding-mode gain factors is discussed. Based on the adaptive SMC algorithm, a vehicle's antilock braking system (ABS) control system model is built with the Simulink Toolbox. Under the single-road condition as well as the different road conditions, the performance of the vehicle ABS system is simulated with the vehicle velocity observer, the tyre/road friction coefficient estimator and the adaptive SMC algorithm. The results indicate that the estimated errors of the vehicle velocity and the tyre/road friction coefficients are acceptable and the vehicle ABS adaptive SMC algorithm is effective. So the proposed adaptive SMC algorithm can be used to control the vehicle ABS without the information of the vehicle velocity and the road conditions.