智能混合动力汽车电液复合制动的协调控制策略

为改善智能混合动力汽车智能辅助驾驶时的制动转矩响应,提出了电机与电子真空助力液压制动系统协调控制策略,包括EVB预测启动控制策略和制动转矩协调控制策略。基于期望制动转矩预测,建立了融合EVB动态响应特性的EVB预测启动控制策略。综合考虑电机动态响应特性、响应裕度、EVB动态响应特性和电池荷电状态,提出了基于电机制动转矩动态补偿的制动转矩协调控制策略。仿真结果表明,该协调制动控制策略可在整个制动过程提高制动转矩响应精度,改善系统的动态响应。     

Extended-Kalman-filter-based regenerative and friction blended braking control for electric vehicle equipped with axle motor considering damping and elastic properties of electric powertrain

Because of the damping and elastic properties of an electrified powertrain, the regenerative brake of an electric vehicle (EV) is very different from a conventional friction brake with respect to the system dynamics. The flexibility of an electric drivetrain would have a negative effect on the blended brake control performance. In this study, models of the powertrain system of an electric car equipped with an axle motor are developed. Based on these models, the transfer characteristics of the motor torque in the driveline and its effect on blended braking control performance are analysed. To further enhance a vehicle's brake performance and energy efficiency, blended braking control algorithms with compensation for the powertrain flexibility are proposed using an extended Kalman filter. These algorithms are simulated under normal deceleration braking. The results show that the brake performance and blended braking control accuracy of the vehicle are significantly enhanced by the newly proposed algorithms.     

汽车制动管路螺纹紧固件的扭矩试验

螺纹紧固件扭矩测试设备是一种确定管路连接件关键特性的工具,可以获得制动管连接系统的关键信息。文章介绍了一种应用汽车管路联接扭矩测试仪分析拧紧力矩、轴向预紧力和转角之间关系的试验方法,通过试验分析和结果验证表明,该测试仪对管路连接拧紧状态的测试结果,确定新的管路连接接头和表面涂层的可靠性,该试验方法提供了保证管路连接有效性的判断依据。     

扭转荷载下群桩基础的承载机理及特性研究

在前人研究的基础上,结合某大桥的转体工程实际,采用理论分析和数值模拟技术相结合的手段,对群桩基础的受扭承载特性、荷载传递机理展开研究,探讨扭转荷载对于中心桩、边桩、角桩承载特性的影响,分析得到各桩基扭矩的变化规律、扭矩沿桩身传递规律、转角沿桩身传递规律、扭矩与转角的变化规律,并进一步验证了前人的研究成果。     

Combined control of a regenerative braking and antilock braking system for hybrid electric vehicles

Most parallel hybrid electric vehicles (HEV) employ both a hydraulic braking system and a regenerative braking system to provide enhanced braking performance and energy regeneration. A new design of a combined braking control strategy (CBCS) is presented in this paper. The design is based on a new method of HEV braking torque distribution that makes the hydraulic braking system work together with the regenerative braking system. The control system meets the requirements of a vehicle longitudinal braking performance and gets more regenerative energy charge back to the battery. In the described system, a logic threshold control strategy (LTCS) is developed to adjust the hydraulic braking torque dynamically, and a fuzzy logic control strategy (FCS) is applied to adjust the regenerative braking torque dynamically. With the control strategy, the hydraulic braking system and the regenerative braking system work synchronously to assure high regenerative efficiency and good braking performance, even on roads with a low adhesion coefficient when emergency braking is required. The proposed braking control strategy is steady and effective, as demonstrated by the experiment and the simulation.     

Dynamics characteristics analysis and control of FWID EV

Compared with internal combustion engine (ICE) vehicles, four-wheel-independently-drive electric vehicles (FWID EV) have significant advantages, such as more controlled degree of freedom (DOF), higher energy efficiency and faster torque response of an electric motor. The influence of these advantages and other characteristics on vehicle dynamics control need to be evaluated in detail. This paper firstly analyzed the dynamics characteristics of FWID EV, including the feasible region of vehicle global force, the improvement of powertrain energy efficiency and the time-delays of electric motor torque in the direct yaw moment feedback control system. In this way, the influence of electric motor output power limit, road friction coefficient and the wheel torque response on the stability control, as well as the impact of motor idle loss on the torque distribution method were illustrated clearly. Then a vehicle dynamics control method based on the vehicle stability state was proposed. In normal driving condition, the powertrain energy efficiency can be improved by torque distribution between front and rear wheels. In extreme driving condition, the electric motors combined with the electro-hydraulic braking system were employed as actuators for direct yaw moment control. Simulation results show that dynamics control which take full advantages of the more controlled freedom and the motor torque response characteristics improve the vehicle stability better than the control based on the hydraulic braking system of conventional vehicle. Furthermore, some road tests in a real vehicle were conducted to evaluate the performance of proposed control method.     

Optimization and design of disk-type MR brakes

In this paper, first a new design for a disk-type magneto-rheological (MR) brake for automotive applications is proposed and then, a finite element analysis is performed to analyze the resulting magnetic field intensity distribution within the MR brake configuration. This finite element model of the brake is then utilized in a optimization process which incorporates Genetic Algorithm (GA) to obtain optimal design parameters. The optimization process goal is to increase the braking torque capacity of the brake while keeping the weight of the brake as low as possible. Although, the braking torque of the present design is larger compared to the previous designs, the braking toque capacity of the present design is still smaller than the required braking torque for automobiles.     

Torque characteristics analysis for optimal design of a copper-layered eddy current brake system

An enhanced parametric model for a copper-layered eddy current electric machine (retarder) is introduced in this paper. The modeled torque characteristics of the copper-layered electromagnetic retarders are based on the results from a detailed electromagnetic finite element analysis (FEA) of these eddy current machines. The model uses a parameterized double-exponential function to model the steady state speed-torque characteristics of the retarder. The parameters are adjusted for optimal braking performance in conjunction with predicted speed-torque characteristics of a copper-layered retarder. A full vehicle model, along with the proposed retarder speed-torque model has been used to simulate a series braking events. The simulation results show that the peaks of the retarder speed-torque curves must be designed to occur within a specific range of speeds for optimal braking performance.     

分布式驱动电动汽车回馈制动失效的液压补偿控制

分布式驱动电动汽车各驱动轮转速和转矩可以单独精确控制,便于实现整车动力学控制和制动能量回馈,从而提升车辆的主动安全性和行驶经济性。但车辆在回馈制动过程中,一旦1台电机突发故障,其他电机产生的制动力矩将对整车形成附加横摆力矩,从而造成车辆失稳,此时虽可通过截断异侧对应电机制动力矩输出来保证行驶方向,但会使车辆制动力大幅衰减或丧失,同样不利于行车安全。为了解决此问题,提出并验证一种基于电动助力液压制动系统的制动压力补偿控制方法,力图有效保证整车制动安全性。以轮毂电机驱动汽车为例,首先建立了整车动力学模型以及轮毂电机模型,通过仿真验证了回馈制动失效的整车失稳特性以及电机转矩截断控制的不足;然后,建立了电动助力液压制动系统模型,并通过原理样机的台架试验验证了模型的准确性;接着,基于滑模控制算法设计了制动压力补偿控制器,并在单侧电机再生制动失效后的转矩截断控制基础上完成了液压制动补偿控制效果仿真验证;最后,通过实车试验证明了所提控制方法的有效性和实用性。研究结果表明：在分布式驱动电动汽车单侧电机再生制动失效工况下,通过异侧电机转矩截断控制和制动系统的液压主动补偿,能够使车辆快速恢复稳定行驶并满足制动强度需求。     

New Control Technique for Maximizing Braking Force on Antilock Braking System

In this paper, we propose a new control strategy for an antilock braking system (ABS) to maintain the braking force at maximum. The popularization of the ABS that prevents the wheels from locking has resulted in an improvement of the vehicle stability and shortening of the braking distance. Further improvement is anticipated if the maximization of the braking force is realized. We found an interesting phenomenon in which the characteristics of the resonance system composed of the vehicle body and the wheel and road surface reflects the slip condition of the road surface. Using this phenomenon, we realized a control method for maintaining the maximum value of the braking force.     

New Control Technique for Maximizing Braking Force on Antilock Braking System

In this paper, we propose a new control strategy for an antilock braking system (ABS) to maintain the braking force at maximum. The popularization of the ABS that prevents the wheels from locking has resulted in an improvement of the vehicle stability and shortening of the braking distance. Further improvement is anticipated if the maximization of the braking force is realized. We found an interesting phenomenon in which the characteristics of the resonance system composed of the vehicle body and the wheel and road surface reflects the slip condition of the road surface. Using this phenomenon, we realized a control method for maintaining the maximum value of the braking force.     

电传动矿用自卸车轮边电机驱动系统动态特性研究

矿区环境复杂,电传动矿用汽车的轮边电机传动系统对整车动力性、制动性及平顺性有极大影响,为了综合路面激励和电机自身激励综合分析驱动系统动态特性,采用数值仿真软件建立轮边电机传动系统模型,分析其在启动加速、平稳运行及制动时的动态特性,为了验证模型的准确性进行了实车实验.结果表明该轮边电机传动系统的输出转矩发生考虑波动转矩后...     

Optimal control of motorsport differentials

Modern motorsport limited slip differentials (LSD) have evolved to become highly adjustable, allowing the torque bias that they generate to be tuned in the corner entry, apex and corner exit phases of typical on-track manoeuvres. The task of finding the optimal torque bias profile under such varied vehicle conditions is complex. This paper presents a nonlinear optimal control method which is used to find the minimum time optimal torque bias profile through a lane change manoeuvre. The results are compared to traditional open and fully locked differential strategies, in addition to considering related vehicle stability and agility metrics. An investigation into how the optimal torque bias profile changes with reduced track-tyre friction is also included in the analysis. The optimal LSD profile was shown to give a performance gain over its locked differential counterpart in key areas of the manoeuvre where a quick direction change is required. The methodology proposed can be used to find both optimal passive LSD characteristics and as the basis of a semi-active LSD control algorithm.     

一种叶轮式MRF汽车制动器结构设计与性能仿真

设计了一种汽车轮内叶轮式磁流变液制动器,推导出该制动器的制动力矩计算方法,并在Matlab/Simulink环境下建立仿真模型,分析了制动器结构参数对制动力矩的影响。结果表明,叶轮式磁流变液制动器工作模式为剪切与流动的混合模式,其制动力矩与磁感应强度呈现对数变化规律,与工作间隙呈现负指数变化规律;叶片的径向尺寸、叶片数量和叶片厚度对制动力矩都有较大影响。所设计的汽车磁流变液制动器能够满足一般小型汽车的制动力矩需求。     

Cooperative control of the motor and the electric booster brake to improve the stability of an in-wheel electric vehicle

A cooperative control algorithm for an in-wheel motor and an electric booster brake is proposed to improve the stability of an in-wheel electric vehicle. The in-wheel system was modeled by dividing it into motor and mechanical parts, and the electric booster brake was modeled through tests. In addition, the response characteristics of the in-wheel system and the electric booster brake were compared through a frequency response analysis. In the cooperative control, the road friction coefficient was estimated using the wheel speed, motor torque, and braking torque of each wheel, and the torque limit of the wheel to the road was determined using the estimated road friction coefficient. Based on the estimated road friction coefficient and torque limit, a cooperative algorithm to control the motor and the electric booster brake was proposed to improve the stability of the in-wheel electric vehicle. The performance of the proposed cooperative control algorithm was evaluated through a hardware-in-the-loop simulation (HILS). Furthermore, to verify the performance of the proposed cooperative control algorithm, a test environment was constructed for the anti-lock braking system (ABS) hydraulic module hardware, and the performance of the cooperative control algorithm was compared with that of the ABS by means of a HILS test.     

鼓式制动器制动时前轮摆振的原因分析

针对某中型货车制动时前轮摆振现象,从理论上分析了前轮摆振的产生机理,先对振动现象进行检测分析,再改进制动器的结构,然后通过整车试验和制动器台架试验对改进进行了验证。试验和分析的结果表明：制动时前轮摆振是车辆制动过程中前制动器的制动力矩波动造成的,与制动器结构有关,通过改进制动器这个摩擦系中的摩擦体的刚性,不仅可以消除制动时的前轮摆振,同时还可大幅提高制动性能。     

Cooperative control for friction and regenerative braking systems considering dynamic characteristic and temperature condition

The braking system of hybrid electric vehicle (HEV) is composed of friction and regenerative braking system, meaning that braking torque is generated by the collaboration of the friction and regenerative braking system. With the attributes, there are two problems in the HEV braking system. First, rapid deceleration occurs due to dynamic characteristic difference when shifting the friction and regenerative braking systems. Second, the friction braking torque alters with temperature because the friction coefficient changes with the temperature. These problems cause the vehicle to be unstable. In this paper, the concurrence control and compensation control were proposed to solve these problems. And also, the concurrence control and compensation control were combined for the stability of the braking system. In order to confirm the effect of these control algorithms, the experiment and simulation were conducted. Consequently, it was confirmed that the control algorithm of this study improved the vehicle safety and stability.     

电动汽车再生制动特点及控制策略

再生制动对延长电动汽车续驶里程和延长机械制动器的使用寿命提供了很好的辅助制动功能。文章介绍了再生制动的影响因素和特点,并将各因素换算成当前最大允许制动力矩和当前最大允许制动功率后,基于ABS系统提出一种再生制动的较好控制策略,为开发设计具体的控制系统及算法奠定了良好的基础。     

基于电机最优回馈转矩曲线的制动控制策略

本文中首先基于电机等效电路模型,分析了车用内置式永磁同步电机的耗能制动状态和回馈制动状态;然后根据电机矢量控制原理,对控制电流指令进行解析,并经试验数据的验证;接着计算得到永磁同步电机最优回馈转矩曲线,并据此提出一种制动回馈能量最优的串联制动控制策略。最后针对某P4并联混合动力商用车,仿真分析了在C?WTVC、CHTC?TT循环工况和试验采集到的某段省道工况下,并联制动和所提出的串联最优制动控制策略下的百公里油耗和制动回收能量。结果表明,与并联制动控制相比,基于电机最优回馈转矩曲线的串联制动控制策略可降低油耗,并回收更多的制动能量,实现制动回收能量和燃油经济性的提升。     

电动汽车复合制动控制研究现状综述

电动汽车复合制动由电机再生制动与机械摩擦制动两部分构成,其控制性能直接影响车辆的能量利用效率、制动安全性以及舒适性。围绕静态制动转矩分配控制、动态复合制动协调控制、制动换挡控制、智能辅助驾驶中的复合制动控制4个方面的研究现状与关键技术展开综述,并对复合制动控制未来研究方向进行了展望。对文献的梳理分析表明：制动转矩分配决定着复合制动系统能量回收能力与车辆制动稳定性,基于规则的分配策略面对复杂多变工况自适应性欠佳,而基于优化的分配策略各方面性能表现良好,但需要兼顾控制实时性与优化效果;利用电机响应迅速与控制精确的优势完成复合制动协调控制,能够提升制动模式切换过渡工况与紧急制动工况的控制性能,改善驾驶舒适性;制动过程中实施合理换挡可以进一步提升能量回收效率,同时通过补偿控制解决换挡过程中动力中断和转矩冲击等问题,保证换挡平顺性;随着电动汽车智能化和网联化发展,复合制动控制与驾驶人辅助系统相结合有助于在保证系统功能的同时实现能量回收效益最大化。