Short-term planning and policy interventions to promote cycling in urban centers: Findings from a commute mode choice analysis in Barcelona,Spain

BackgroundCycling for transportation has become an increasingly important component of strategies to address public health, climate change, and air quality concerns in urban centers. Within this context, planners and policy makers would benefit from an improved understanding of available interventions and their relative effectiveness for cycling promotion. We examined predictors of bicycle commuting that are relevant to planning and policy intervention, particularly those amenable to short- and medium-term action.MethodsWe estimated a travel mode choice model using data from a survey of 765 commuters who live and work within the municipality of Barcelona. We considered how the decision to commute by bicycle was associated with cycling infrastructure, bike share availability, travel demand incentives, and other environmental attributes (e.g., public transport availability). Self-reported and objective (GIS-based) measures were compared. Point elasticities and marginal effects were calculated to assess the relative explanatory power of the independent variables considered.ResultsWhile both self-reported and objective measures of access to cycling infrastructure were associated with bicycle commuting, self-reported measures had stronger associations. Bicycle commuting had positive associations with access to bike share stations but inverse associations with access to public transport stops. Point elasticities suggested that bicycle commuting has a mild negative correlation with public transport availability (−0.136), bike share availability is more important at the work location (0.077) than at home (0.034), and bicycle lane presence has a relatively small association with bicycle commuting (0.039). Marginal effects suggested that provision of an employer-based incentive not to commute by private vehicle would be associated with an 11.3% decrease in the probability of commuting by bicycle, likely reflecting the typical emphasis of such incentives on public transport.ConclusionsThe results provide evidence of modal competition between cycling and public transport, through the presence of public transport stops and the provision of public transport-oriented travel demand incentives. Education and awareness campaigns that influence perceptions of cycling infrastructure availability, travel demand incentives that encourage cycling, and policies that integrate public transport and cycling may be promising and cost-effective strategies to promote cycling in the short to medium term.     

A hybrid-choice latent-class model for the analysis of the effects of weather on cycling demand

In this paper we analyze demand for cycling using a discrete choice model with latent variables and a discrete heterogeneity distribution for the taste parameters. More specifically, we use a hybrid choice model where latent variables not only enter into utility but also inform assignment to latent classes. Using a discrete choice experiment we analyze the effects of weather (temperature, rain, and snow), cycling time, slope, cycling facilities (bike lanes), and traffic on cycling decisions by members of Cornell University (in an area with cold and snowy winters and hilly topography). We show that cyclists can be separated into two segments based on a latent factor that summarizes cycling skills and experience. Specifically, cyclists with more skills and experience are less affected by adverse weather conditions. By deriving the median of the ratio of the marginal rate of substitution for the two classes, we show that rain deters cyclists with lower skills from bicycling 2.5 times more strongly than those with better cycling skills. The median effects also show that snow is almost 4 times more deterrent to the class of less experienced cyclists. We also model the effect of external restrictions (accidents, crime, mechanical problems) and physical condition as latent factors affecting cycling choices.     

Travel mode attitudes,urban context,and demographics: do they interact differently for bicycle commuting and cycling for other purposes?

This study examined whether interactions between travel mode attitudes, urbanization level, and socio-demographics were different for bicycle commuting and cycling for other purposes. Data were obtained from the 2014 wave of the Netherlands mobility panel (MPN). In total, 2673 respondents (18?+?years) who had recorded at least one trip on the days covered by the survey were included in the sample. Four outcomes were constructed, two of which concerned commuting-related cycling: any commuting-related bicycle usage (yes vs. no) and average cycling duration (in hours per weekday). Likewise, two similar outcome variables concerning cycling for other proposes were constructed. These outcomes were analyzed by means of Tobit regression models (cycling duration) and binary logistic models (any bicycle usage). Attitudinal factors concerning different travel modes, namely bus, car, cycling, and train, were constructed by means of factor analysis. The results showed that a positive attitude toward cycling was positively related to bicycle commuting duration, but this association was less strong among those with a positive attitude toward bus use. Having a positive cycling attitude had a weaker association with both bicycle commuting usage and duration in those who do not always have a car available. Regarding cycling for other purposes, cycling attitude had a stronger positive association with cycling duration among residents of very highly urbanized area, compared to residents of less urbanized areas. The available evidence, though limited, suggests that targeting attitudes can have a measurable impact on bicycling, but not to the same extend among all people.

     

Assessing the impact of the National Cycle Network and physical activity lifestyle on cycling behaviour in England

This paper examines the association between access to National Cycle Network (NCN) routes in England and an individual’s cycling behaviour whilst accounting for their broader physical activity lifestyle and controlling for their socio-economic circumstances. It identifies a positive association between access to these routes and the total minutes of any form of cycling, and the number of days that cycling takes place primarily for recreational purposes. The broader physical activity of individuals also has a positive association with cycling. Walking appears most likely to be complementary to non-recreational cycling, whilst participation in sport with all forms of cycling, but not with longer duration utilitarian trips. The research also indicates that access to NCN routes has the potential to increase such cycling further, with the exception of longer utilitarian trips, as does a more physically active lifestyle, particularly walking. The main policy implications of the research are to recognise that cycling is intrinsically linked to other physical activity, notably, walking, but that the NCN routes measured in this study primarily support longer duration recreational activity, which is also affected by sporting activity. This suggests that one avenue for achieving the health benefits of cycling may be through promoting NCN routes to harness a more generally active lifestyle and particularly in leisure, whilst sustainability may be further promoted through being linked more to other active travel such as walking. There is a therefore a need to exploit the potential of such NCN route provision as part of this promotion.     

Who cycles more? Determining cycling frequency through a segmentation approach in Montreal,Canada

The decision to cycle frequently in an urban setting is a complex process and is affected by a variety of factors. This study analyzed the various factors influencing cycling frequency among 1707 cyclists from Montreal, Canada using an ordinal logistic regression. A segmentation of cyclists is used in a series of ordinal logistic models to better understand the different impacts of variables on the frequency of cycling among each group of cyclists for commute and for utilitarian purposes. Our models show a variation in the impacts of each dependent variable on frequency of cycling across the various segments of cyclists. Mainly making cyclists feel safe not only on bicycle specific infrastructure but also on regular streets, emphasizing the low cost, convenience and improving the opinion on cycling in the population are effective interventions to increase bicycle usage. Also, it was shown that women were less likely to cycle to work than men, but more likely to cycle for other utilitarian trips, pointing at the presence of specific barriers to commuting for woman. Although the findings from this study are specific to Montreal, they can be of interest to transportation planners and engineers working toward increasing cycling frequency in other regions.     

Transition to a cyclable city: Latent variables affecting bicycle commuting

An understanding of the key factors influencing bicycle commuting is essential for developing effective policies towards a cyclable city. This paper contributes to this line of research by proposing a methodology for including cycling-related indicators in mobility surveys based on the Theory of Planned Behaviour (TPB), and applying an exploratory factor analysis (EFA) to evaluate the structure of latent variables associated with bicycle commuting. The EFA identified six cycling latent variables: Lifestyle, Safety and comfort, Awareness, Direct disadvantages, Subjective norm, and Individual capabilities. These were complemented with a latent variable related to habit: Non-commuting cycling habit. Statistical differences and regression analysis were applied with the cycling latent variables. The study also includes the relationship between objective factors and bicycle commuting, which reveals minor associations. This methodology was applied to the “starter cycling city” of Vitoria-Gasteiz (Spain). The results confirm that in this context – in transition to a cyclable city – safety and comfort issues are not the main barriers for all commuters, although more progress needs to be made to normalise cycling. A set of customised policy initiatives is recommended in the light of the research findings, including marketing campaigns to encourage non-commuting cycling trips, bicycle measures to target social groups as opposed to individuals, bicycle-specific programs such as “Bike-to-work Days”, and cycling courses.     

Bicycle commuting in Melbourne during the 2000s energy crisis: A semiparametric analysis of intraday volumes

Cycling is attracting renewed attention as a mode of transport in western urban environments, yet the determinants of usage are poorly understood. In this paper we investigate some of these using intraday bicycle volumes collected via induction loops located at ten bike paths in the city of Melbourne, Australia, between December 2005 and June 2008. The data are hourly counts at each location, with temporal and spatial disaggregation allowing for the impact of meteorology to be measured accurately for the first time. Moreover, during this period petrol prices varied dramatically and the data also provide a unique opportunity to assess the cross-price elasticity of demand for cycling. Over-dispersed Poisson regression models are used to model volumes at each location and at each hour of the day. Seasonality and the impact of weather conditions are modelled as semiparametric and estimated using recently developed multivariate penalized spline methodology. Unlike previous studies that use aggregate data, the empirical results show a substantial meteorological and seasonal component to usage. They also suggest there was substitution into cycling as a mode of transport in response to increases in petrol prices, particularly during peak commuting periods and by commuters originating in wealthy and inner city neighbourhoods. Last, we extend the approach to a multivariate longitudinal count data model using a Gaussian copula estimated by Bayesian data augmentation. We find first order serial dependence in the hourly volumes and a ‘return trip’ effect in daily bicycle commutes.     

Exploring the link between the neighborhood typologies,bicycle infrastructure and commuting cycling over time and the potential impact on commuter GHG emissions

This paper investigates the evolution of urban cycling in Montreal, Canada and its link to both built environment indicators and bicycle infrastructure accessibility. The effect of new cycling infrastructure on transport-related greenhouse gas (GHG) emissions is then explored. More specifically, we aim at investigating how commuting cycling modal share has evolved across neighborhood built-environment typologies and over time in Montreal, Canada. For this purpose, automobile and bicycle trip information from origin–destination surveys for the years 1998, 2003 and 2008 are used. Neighborhood typologies are generated from different built environment indicators (population and employment density, land use diversity, etc.). Furthermore, to represent the commuter mode choice (bicycle vs automobile), a standard binary logit and simultaneous equation modeling approach are adopted to represent the mode choice and the household location. Among other things, we observe an important increase in the likelihood to cycle across built environment types and over time in the study region. In particular, urban and urban-suburb neighborhoods have experienced an important growth over the 10 years, going from a modal split of 2.8–5.3% and 1.4–3.0%, respectively. After controlling for other factors, the model regression analysis also confirms the important increase across years as well as the significant differences of bicycle ridership across neighborhoods. A statistically significant association is also found between the index of bicycle infrastructure accessibility and bike mode choice – an increase of 10% in the accessibility index results in a 3.7% increase in the ridership. Based on the estimated models and in combination with a GHG inventory at the trip level, the potential impact of planned cycling infrastructure is explored using a basic scenario. A reduction of close to 2% in GHG emissions is observed for an increase of 7% in the length of the bicycle network. Results show the important benefits of bicycle infrastructure to reduce commuting automobile usage and GHG emissions.     

Engineering condition assessment of cycling infrastructure: Cyclists’ perceptions of satisfaction and comfort

The UK National Cycle Network comprises 23,660 km of cycling and walking paths of which a significant percentage is dedicated off-road infrastructure. This represents a significant civil engineering infrastructure asset that currently contributes to the provision of a sustainable transport mode option nationwide. Commuting and recreational cyclists have observed the often hazardous conditions on these paths. There are various simple measures that could be taken to improve the maintenance of such off-road paths. Reliance on walk-over surveys (direct visual inspection) and path users notifying the local authority may not be tackling maintenance in a resource efficient manner. The proposed inspection method includes the use of an instrumented bicycle to examine cycle path condition through user perception of satisfaction and quality. A questionnaire was conducted to identify the attributes of off-road cycling infrastructure people find most important in relation to their personal satisfaction. An exploratory factor analysis was undertaken on perception study data to elucidate the determination of the variables associated with perceived user satisfaction. The study has shown that people find maintenance issues to be of high importance, especially surface issues. From exploratory factor analysis of results, satisfaction has been found to load with comfort and safety. Field testing was then conducted using subjective user opinions and objective vibration data. These results were then used to assist the creation of dedicated user perception based surface condition rating-scales.     

Random parameter models for estimating statewide daily bicycle counts using crowdsourced data

Persistent lack of non-motorized traffic counts can affect the evidence-based decisions of transportation planning and safety-concerned agencies in making reliable investments in bikeway and other non-motorized facilities. Researchers have used various approaches to estimate bicycles counts, such as scaling, direct-demand modeling, time series, and others. In recent years, an increasing number of studies have tried to use crowdsourced data for estimating the bicycle counts. Crowdsourced data only represents a small percentage of cyclists. This percentage, on the other hand, can change based on the location, facility type, meteorological, and other factors. Moreover, the autocorrelation observed in bicycle counts may be different from the autocorrelation structure observed among crowdsourced platform users, such as Strava. Strava users are more consistent; hence, the time series count data may be stationary, while bicycle demand may vary based on seasonal factors. In addition to seasonal variation, several time-invariant contributing factors (e.g., facility type, roadway characteristics, household income) affect bicycle demand, which needs to be accounted for when developing direct demand models. In this paper, we use a mixed-effects model with autocorrelated errors to predict daily bicycle counts from crowdsourced data across the state of Texas. Additionally, we supplement crowdsourced data with other spatial and temporal factors such as roadway facility, household income, population demographics, population density and weather conditions to predict bicycle counts. The results show that using a robust methodology, we can predict bicycle demand with a 29% margin of error, which is significantly lower than merely scaling the crowdsourced data (41%).     

Overcoming barriers to cycling: understanding frequency of cycling in a University setting and the factors preventing commuters from cycling on a regular basis

Much local and regional transport policy is attempting to increase cycling as an everyday mode of travel through infrastructure changes, education initiatives, and safety campaigns. While considerable research has examined the influence of the built form on cycling, less research has examined the barriers that prevent people who wish to cycle more (as part of their routine) from doing so. This study examines several factors influencing the frequency by which people do (and do not) cycle in a campus setting in a large metropolitan area. Mixed methods reveal differences between barriers to cycling as well as the relative strength of these barriers across categories of age, sex, and current mode used. A multinomial logit model, which controls for residential self-selection effects, predicts whether and how often a respondent cycles based on socio-demographic and trip characteristics. The presence of cycle paths is found to be strongly associated with a higher frequency of cycling commutes. Additionally, an analysis of stated barriers reveals effort and a lack of safety as the most important barriers to potential cyclists. Finally, a qualitative analysis of respondents’ open-ended responses confirms the influence of bicycle paths, but reveals other factors such as the importance of improved interactions among various street users. Findings from this research can be of benefit to transportation engineers and planners who are aiming to increase the use of cycling among various groups of commuters.     

Bicycle mode share in China: a city-level analysis of long term trends

In the past 15 years, cities in China have experienced big changes in socioeconomic and traffic conditions, resulting in a long term change in bicycle use. This study aims to quantify the changes in bicycle mode share in Chinese cities and explore the potential causes. Based on data from 51 cities, it is found that bicycle mode share at the city level decreased gradually in the past. Conventional bicycle mode share decreased with a rate of 3 % per year, but electric bicycle mode share increased with a rate of 2 % per year. The correlations between city features such as demographics and built environments and bicycle mode share at different city sizes are compared. The generalized linear models are estimated to relate the changes in the share of different trip modes to various city-level factors. The results show that the bicycle mode share in a city is impacted by factors including city area size, population density, number of cars, percentage of local road mileage among all roads, and trip purpose. Possible reasons for the changes in bicycle uses in Chinese cities are explored and policy implications are discussed.     

Cycling culture and socialisation: modelling the effect of immigrant origin on cycling in Denmark and the Netherlands

This paper focusses on travel socialisation by examining the effect of immigrant origin on cycling in two distinct European cycling cultures: Denmark and the Netherlands. Based on data from both countries’ national travel surveys, the empirical analyses show that people of immigrant origin cycle less compared to natives. While in Denmark this effect is significant only for people of non-Western origin, in the Netherlands it is also true for people of Western origin, probably because they originate to a greater extent from non-European countries (e.g., Indonesia). In the Netherlands, the effect of non-Western origin is larger for women than for men, while we do not find a significant gender interaction in the Danish data. Individuals with residence in neighbourhoods with a higher share of people of non-Western origin are less likely to cycle, probably as the national norm to cycle is less salient here. The results cannot be fully explained by differences in socioeconomic status, car access, or level of urbanisation. We assume that cultural norms mediated by parents play a relevant role. The results lend support to policies focused on stimulating the use of the bicycle among immigrants and especially women of non-Western origin.

     

Temporal trends and the effect of weather on pedestrian volumes: A case study of Montreal,Canada

This study examines the impact of weather on pedestrian activity, as well as the temporal trends of pedestrian flows in the city of Montreal, Canada. The direct and lagged effects of weather variables on hourly volumes are determined for the temperate and cold months, as well as for weekdays and weekends. Pedestrian hourly volumes are found to decrease in the winter. In downtown locations, there are three weekday pedestrian hourly peaks; a pattern distinctive from those observed in other surveys. Also, temperature, humidity, wind speed as well as direct and lagged effects of precipitation are the main factors affecting pedestrian activity. In winter, pedestrian flows are more sensitive to wind speeds and precipitation, and also during weekends than weekdays. Built environment plays a role not only in the magnitude but also in the temporal profile of pedestrian sidewalk activity. In comparison to bicycle ridership, pedestrian flows seem to be much less sensitive to weather.     

The relation between bicycle commuting and non-work cycling: results from a mobility panel

This study aims to establish whether or not bicycle commuting and cycling for other purposes (e.g. shopping, visiting friends) are related over time. Using previously gathered panel data (the Dutch mobility panel) these relationships are revealed by (1) a series of conditional change models and (2) a latent transition model. The conditional change models indicate that, with a lag of 1 year and controlling for a range of background characteristics, bicycle commuting and non-work cycling (in number of weekly trips) have a positive reciprocal influence on each other. The models show that work-related factors, such as the distance to work or whether a person receives a travel allowance, affect not only bicycle commuting but also non-work cycling. The latent transition model indicates that people can be clustered into four groups: non-cyclists, non-work cyclists, all-around cyclists and commuter cyclists. This model shows that people with a consistent propensity to not cycle at all (non-cyclists) or to cycle for both work and non-work purposes (all-around cyclists) are most stable in their travel behavior. Non-work cyclists and commuter cyclists are less stable in travel behavior. The model also shows that all-around cyclists are not (significantly) affected by a change in the distance to work. The article concludes with several directions for future research.     

Modelling the potential for cycling in access trips to bus,train and metro in Rio de Janeiro

Most studies that address the integration of cycling and public transport (PT) focus on developed countries and deal with multi-modal bicycle-train trips. Little is known about the integration of cycling and other main modes such as bus and metro, especially in developing countries, where entirely different socio-economic and trip making conditions prevail. The aim of this study is to model the propensity of current PT users to shift to the bicycle in access trips to bus stops, train and metro stations in Rio de Janeiro, Brazil. Interviews were conducted to collect data on the socio-economic characteristics of the interviewee, trip and spatial characteristics and self-reported barriers and motivators for bicycle use. Two binary logit models were estimated to predict the main factors affecting the propensity to use a bicycle as feeder mode to PT. The results show that socio-economic characteristics as well as barriers and motivators are important factors to explain propensity for bike and ride. The barriers’ model reveals that personal constraints, living too close to the PT boarding point, current parking conditions and public safety play a role. For the motivators’ model, changing home location, owning a bicycle, implementation of cycle ways and improvement in parking conditions are explanatory. Policy recommendations are formulated to increase bicycle ownership and improve cycling infrastructure.     

Motivators and deterrents of bicycling: comparing influences on decisions to ride

In a survey of 1,402 current and potential cyclists in Metro Vancouver, 73 motivators and deterrents of cycling were evaluated. The top motivators, consistent among regular, frequent, occasional and potential cyclists, were: routes away from traffic noise and pollution; routes with beautiful scenery; and paths separated from traffic. In factor analysis, the 73 survey items were grouped into 15 factors. The following factors had the most influence on likelihood of cycling: safety; ease of cycling; weather conditions; route conditions; and interactions with motor vehicles. These results indicate the importance of the location and design of bicycle routes to promote cycling.     

Designing a route planner to facilitate and promote cycling in Metro Vancouver,Canada

With increasing fuel costs, greater awareness of greenhouse gas emissions and increasing obesity levels, cycling is promoted as a health promoting and sustainable transport mode. We developed a cycling route planner (http://cyclevancouver.ubc.ca) for Metro Vancouver, British Columbia, Canada, to facilitate cycling amongst the general public and to facilitate new route location by transportation planners. The geographical information system-based planner incorporates variables that influence choices to travel by bicycle (e.g., distance, elevation gain, safety, route features, air pollution and links to transit) in selecting the preferred routing. Using a familiar and user-friendly Google Maps interface, the planner allows individuals to seek optimized cycling routes throughout the region based on their own preferences. In addition to the incorporation of multiple user preferences in route selection, the planner is unique amongst cycling route planners in its use of topology to minimize data storage redundancy, its reliance on node/vertex index tables to increase efficiency of the route selection process, and the use of web services and asynchronous technologies for quick data delivery. Use of this tool can help promote bicycle travel as a form of active transportation and help lower greenhouse gas carbon dioxide (CO₂) and air pollutant emissions by reducing car trips.     

Estimation of the determinants of bicycle mode share for the journey to work using census data

A model is presented that relates the proportion of bicycle journeys to work for English and Welsh electoral wards to relevant socio-economic, transport and physical variables. A number of previous studies have exploited existing disaggregate data sets. This study uses UK 2001 census data, is based on a logistic regression model and provides complementary evidence based on aggregate data for the determinants of cycle choice. It suggests a saturation level for bicycle use of 43%. Smaller proportions cycle in wards with more females and higher car ownership. The physical condition of the highway, rainfall and temperature each have an effect on the proportion that cycles to work, but the most significant physical variable is hilliness. The proportion of bicycle route that is off-road is shown to be significant, although it displays a low elasticity (+0.049) and this contrasts with more significant changes usually forecast by models constructed from stated preference based data. Forecasting shows the trend in car ownership has a significant effect on cycle use and offsets the positive effect of the provision of off-road routes for cycle traffic but only in districts that are moderately hilly or hilly. The provision of infrastructure alone appears insufficient to engender higher levels of cycling.

Moving between mobility cultures: what affects the travel behavior of new residents?

This paper analyzes the complex interdependencies between residential relocation and daily travel behavior by focusing on modal change. To help explain changes in daily travel patterns after a long distance move between cities the concept of urban mobility cultures is introduced. This comprehensive approach integrates objective and subjective elements of urban mobility, such as urban form and socio-economics on the one hand, and lifestyle orientations and mode preferences on the other, within one socio-technical framework. Empirically, the study is based on a survey conducted among people who recently moved between the German cities Bremen, Hamburg and the Ruhr area. Bivariate analyses and linear multiple regression models are applied to analyze changes in car, rail-based and bicycle travel. This is done by integrating variables that account for urban mobility cultures and controlling for urban form, residential preferences and socio-demographics. A central finding of this study is, that changes in the use of the car and rail-based travel are much more dependent on local scale, such as neighborhood type and residential preferences, whereas cycling is more affected by city-wide attributes, which we addressed as mobility culture elements.