Control effects of steer-by-wire system for motorcycles on lane-keeping performance

This study discusses the control effects of the steer-by-wire (SBW) system for motorcycles on the lane-keeping performance by examining computer simulation with a rider-vehicle system which consists of a simplified vehicle model, a rider control model and the controller of the SBW system. The SBW system, which compensates the rolling angle deviation between the desired rolling angle intended by the rider and the actual rolling angle, improves the lane-keeping performance of the rider-vehicle system under the steering torque disturbance. The SBW system is, on the other hand, not effective in the lane-keeping performance under the lateral force disturbance. In addition, the lane-keeping assistance (LKA) system is applied to the SBW system and the cooperativeness of the SBW and the LKA systems is examined. The LKA system improves the lane-keeping performance of the SBW system under not only the steering torque disturbance but also the lateral force disturbance.     

Steering control of motorcycles using steer-by-wire system

This study proposes a steering control method to improve motorcycle handling and stability. Steer-by-wire (SBW) technology is applied to the motorcycle's steering system to remove characteristic difficulties of vehicle maneuvers. By examining computer simulation using a simplified motorcycle model, the actual rolling angle of the SBW motorcycle is controlled to follow the desired rolling angle intended by the rider. A state feedback control such as linear quadratic control gives the SBW vehicle a good follow-through performance compared with proportional-derivative control because it can decouple rolling motion from the other motions, which affect the rolling motion in the strongly coupled motorcycle system.     

汽车线控转向系统的关键技术及发展前景

线控转向（ Steer-By-Wire,SBW）系统,指通过通讯网络连接各部件的控制系统,取消了传统的机械式转向装置,转向器与转向柱间无机械连接。该系统转动效率高,响应时间快,降低车辆底盘开发成本,改善车辆驾驶特性,并且利于环境的保护,在一定程度上提高了车辆的操纵稳定性、汽车碰撞安全性和整车主动安全性等。主要研究了汽车线控转向系统的关键技术,对线控转向技术的发展进行了前景的展望。     

线控双电机转向系统滑模同步控制及其硬件在环仿真

为了满足高等级自动驾驶转向执行机构的高安全性需求，研究一种采用冗余双电机转向执行机构的线控转向系统，针对双电机在转角伺服控制过程中存在的不同步问题，提出一种基于滑模控制的同步控制策略。首先，对采用冗余双电机转向执行机构的线控转向系统进行结构原理的分析，建立线控系统转向执行机构模型和车辆二自由度模型；然后，为实现转向执行机构的转角伺服控制，在位置、速度、电流的三闭环控制策略的基础上设计速度同步控制器。为解决2个转向执行电机运行过程中存在的速度不同步问题，采用滑模控制方法，将2个电机的转速差值作为控制器的输入量，得到双电机电流的补偿量，并将其叠加至双电机的目标电流中。同时，将上述控制策略与传统PID控制进行对比仿真试验，验证了基于滑模同步控制的线控双电机执行器能够更好地协调双电机的转速，实现双电机同步运行。最后，搭建线控转向硬件在环试验台，对所设计的控制策略的有效性进行验证。结果表明：所设计的双电机线控转向系统滑模同步控制策略能够在实现转角伺服控制的同时，减少双电机的速度不同步现象，保证线控转向系统转角伺服的同步性能。     

EPS系统的控制策略研究

根据转向系统的助力特性要求,对电动助力转向系统的控制策略进行研究。建立该系统的动力学模型,对转向系统的助力控制、阻尼控制和回正控制进行分析研究。策略中主要采用PID控制方法,首先进行控制器目标电流的确定和补偿,然后对模型的电流进行仿真和验证,结果表明,此控制策略的增加转向系统的轻便性和路感。     

Steering torque control using variable impedance models for a steer-by-wire system

This paper presents a novel sensor-less steering torque control method for applications to the steer-by-wire system. A steer-by-wire system has not any mechanical link to connect a steering wheel and a rack and pinion gear module. Instead of mechanical devices, two electric motors are used on each side. A one motor is attached to the steering wheel and the other is set on rack and pinion. The motor on the steering wheel works as a deliverer between a steering torque and load torque from the road. In this paper, we focus on motion control related to the steering feel based on impedance control. Therefore, the model of rack and pinion is not considered in this work. In most power steering systems, a torque sensor is used to set impedance effect on driver’s steering feel. In this paper, we proposed a novel steering control method without using any torque sensors. The effectiveness of a proposed method is confirmed from experimental results.     

电动助力转向系统的回正与主动阻尼控制策略研究

针对配备电动助力转向系统的车辆低速时回正性差,而中高速时又容易出现回正超调的现象,提出了一种新型的回正与主动阻尼控制策略。该控制策略以功能原理为理论基础,可以随车速和转向盘转角的不同而调整回正力矩或阻尼力矩的大小。实车试验的结果证明,该控制策略能够改善车辆低速时的回正性,抑制车辆中高速时的回正超调现象,并且在施加了回正与主动阻尼控制后,驾驶员的操纵手感没有受到不良的影响。     

Lateral stability control of dynamic steering for dual motor drive high speed tracked vehicle

In this paper, the torque and power required by dual motors for electric tracked vehicle during dynamic steering maneuvers with different steering radiuses are analyzed. A steering coupling drive system composed of a new type of center steering motor, two Electromagnetic (EM) clutches, two planetary gear couplers, and two propulsion motors is proposed for the dual motors drive high speed electric tracked vehicle (2MHETV), which aims to improve its lateral stability. An average torque direct distribution control strategy based on steering coupling and an optimization-distribution-based close-loop control strategy are designed separately to control the driving torque or regenerative braking torque of two propulsion motors for vehicle stability enhancement. Then models of the 2MHETV and the proposed control strategy are established in Recudyn and Matlab/Simulink respectively to evaluate the lateral stability of dynamic steering for the 2MHETV with different steering radiuses on hard pavement.The simulation results show that the lateral stability of the 2MHETV can be significantly improved by the proposed optimization-distribution-based close-loop control strategy based on steering coupling system.     

Adaptive feedforward control of a steer-by-wire system by online parameter estimator

The tracking control of the steer-by-wire (SBW) system to achevie desired steering motion is the core issue for the design of algorithm. Most of model-based tracking control assumed the constant parameters without the consideration of dynamic characteristics. The external disturbances and model nonlinearities can bring uncertainties of the system parameters. To reduce the influence of parameter uncertainties, an online estimator by output error identification method is proposed to estimate the dynamic parameters of a SBW system. Meanwhile, the parameter gradient projection method is applied to eliminate the parameter drift, while a full order state observer is developed to weaken the effects of noise disturbance during the parameter identification. Since the sensitivity of parameter uncertainties for the feedforward control, the online estimator is incorporated into the control model and improve the controlled robustness. The proposed adaptive feedforward controller is conducted by the real-time experiments to show the tracking performance.     

Interaction of vehicle and steering system regarding on-centre handling

For the on-centre handling behaviour of vehicles the steering system is absolutely important. To investigate the interaction of the vehicle and steering system a validated, especially tailored simulation model was developed. Some meaningful vehicle and steering system parameters are altered to show the influence on steering wheel torque, steering feel and understeer. The results underline the importance of an accurate steering system model. Identified measures to improve the centre feel and steering response were a stiffer torsion bar, a higher cornering stiffness or a lower overall steering ratio. The steering response, however, suffers when the centre feel is improved by a higher trail. The steering rack friction reduces mainly the steering response while the steering column friction decreases the centre feel whereas a stiffer torsion bar lessens the understeer tendency.     

Interaction of vehicle and steering system regarding on-centre handling

For the on-centre handling behaviour of vehicles the steering system is absolutely important. To investigate the interaction of the vehicle and steering system a validated, especially tailored simulation model was developed. Some meaningful vehicle and steering system parameters are altered to show the influence on steering wheel torque, steering feel and understeer. The results underline the importance of an accurate steering system model. Identified measures to improve the centre feel and steering response were a stiffer torsion bar, a higher cornering stiffness or a lower overall steering ratio. The steering response, however, suffers when the centre feel is improved by a higher trail. The steering rack friction reduces mainly the steering response while the steering column friction decreases the centre feel whereas a stiffer torsion bar lessens the understeer tendency.     

电动助力转向系统回正控制策略研究

在分析电动助力转向系统回正模型的基础上,提出了电动助力转向回正控制算法。尝试直接采用扭矩信号作为转向盘转角估计的依据,并以此为基础提出不需配置转角传感器的回正控制策略。在matlab中建立了电动助力转向系统的模型,并利用Simulink工具箱对算法进行了仿真。仿真结果表明,所提出的回正控制策略能提高转向盘的回正性能,并为台架试验打下了基础。     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.     

考虑驾驶人特性的一主多从混合博弈容错控制

为保证线控底盘电动汽车在遭遇执行器失效时的稳定性，并考虑人-车交互行为，提出了以驾驶人为领导者的一主多从（Single-leader-multiple-follower，SLMF）混合博弈容错控制框架。为实现驾驶人-车辆的交互控制，首先建立了两者的耦合模型。其次，将驾驶人及5个底盘子系统即主动前轮转向（Active Front Steering，AFS）系统和4个轮毂电机建模为博弈中的6个参与者，基于Stackelberg主从博弈与多人合作博弈设计了SLMF混合博弈控制框架。考虑驾驶人具有优先控制权限及执行器对驾驶人行为的补偿作用，基于Stackelberg博弈理论建立了驾驶人与底盘子系统的主从博弈模型，其中驾驶人作为领导者通过感知跟随者的行为做出转向决策，而5个底盘子系统被建模为跟随者。由于跟随者追求共同的横向稳定控制目标，因此基于合作博弈理论建立了合作模型，并对领导者的转向策略做出最优响应。最后，为研究跟随者之间追求不同目标导致不合作时的控制效果，设计了非合作Nash博弈与Stackelberg博弈相结合的混合博弈为对比方法，通过实时硬件在环测试验证并对比了2种方法。结果表明：针对不同风格的驾驶人，所设计的方法可以保证遭遇执行器卡死失效车辆的稳定性。与不合作的情况相比，2种不同风格的驾驶人驾驶的车辆在底盘子系统合作时，车辆稳定性分别提升了54.62%和53.78%，驾驶人工作负荷分别降低了31.79%和36.07%。     

An Emergency Obstacle Avoidance Control Strategy for Automated Highway Vehicles

Summary This paper presents an emergency obstacle avoidance control strategy that may be used in automated highway vehicles. In the proposed control strategy, an inverse vehicle dynamics problem is solved on the selected emergency lane-change path to find out the nominal feedforward control inputs such as the steering wheel angle and the braking force. Then the overall vehicle lateral and yaw motion is controlled additionally in the feedback path by an active yaw moment for stability augmentation as well as a corrective steering angle that is added to the nominal steering angle in order to compensate for uncertainties involved in the nominal control input computation. The proposed control strategy has been tested by an ABS Hardware-In-the-Loop Simulation (HILS) system for rapid and safe control prototyping in a lab. Simulation results with a sample emergency avoidance distance (45 m) show that the proposed control strategy may be used as a feasible obstacle avoidance strategy for automated highway vehicles.     

An Emergency Obstacle Avoidance Control Strategy for Automated Highway Vehicles

Summary This paper presents an emergency obstacle avoidance control strategy that may be used in automated highway vehicles. In the proposed control strategy, an inverse vehicle dynamics problem is solved on the selected emergency lane-change path to find out the nominal feedforward control inputs such as the steering wheel angle and the braking force. Then the overall vehicle lateral and yaw motion is controlled additionally in the feedback path by an active yaw moment for stability augmentation as well as a corrective steering angle that is added to the nominal steering angle in order to compensate for uncertainties involved in the nominal control input computation. The proposed control strategy has been tested by an ABS Hardware-In-the-Loop Simulation (HILS) system for rapid and safe control prototyping in a lab. Simulation results with a sample emergency avoidance distance (45 m) show that the proposed control strategy may be used as a feasible obstacle avoidance strategy for automated highway vehicles.     

电动助力转向系统建模与控制策略研究

概述了电动助力转向系统的优点，建立了电动助力转向的数学模型。在此基础上对比分析了比例控制策略和比例微分控制策略的不同控制效果。仿真结果表明，在助力增益较大时，比例控制会引起转向盘振动，同时来自路面的高频干扰也容易传递到转向盘，使手感变差。比例微分控制引入微分环节，增加了系统的阻尼，通过调节微分系数，可以调节系统带宽，因而较好解决了转向轻便性、转向盘振动和抑制路面高频干扰之间的矛盾。     

制动与转向协调动作的车辆避撞控制研究（双语出版）

为了弥补现有汽车避撞控制策略以及碰撞风险评价指标单一的不足，提出转向和制动协调的主动避撞控制系统。首先规划了五次多项式换道路径，在对其理论分析的基础上得到转向临界避撞距离和与目标车道车辆的安全距离约束。其次，考虑道路附着系数和系统延迟的影响，基于制动过程给出制动临界避撞距离，并以纵向行驶安全系数ξ和碰撞时间倒数T^-1_TC划分安全行驶区域，利用驾驶人实车跟车数据标定稳态跟随/定速巡航区域的阈值。随后，通过转向/制动临界避撞距离的对比给出2种避撞方式的安全收益范围。最后搭建Simulink/CarSim联合仿真模型，并对其进行不同初始条件下的避撞仿真试验。研究结果表明：转向操作在制动距离不足时仍是有效的；当主车高速近距离接近静止前车时，主车可以顺利采取转向换道动作，而常规ACC系统在2.5 s处的车间相对距离为-0.76 m，事实上已经发生了碰撞；当相邻车道前车与主车纵向间距不满足换道安全距离约束时，避撞控制系统进入紧急制动模式，最大制动减速度达到-0.8g（g为重力加速度），实际最小车间距为5.1 m；通过转向和制动的协调动作，充分发挥了车辆的避撞潜力；ξ和T^-1_TC指标的融合，可以更好地评估碰撞风险并实现不同控制模式的转换，在保证行车安全的同时可避免过分制动给乘客造成的紧张感。     

基于增益模糊滑模变结构的线控液压转向控制

在分析全液压转向结构与转向偏差机理的基础上,设计了一种线控液压转向系统以实现车辆转向同步,消除转向偏差;针对现有方法确定的期望转向曲线可跟踪性差而无法实现转向同步,提出一种基于转向效率的期望转向曲线及其可行域确定方法,以最大、最小转向效率对应转向曲线为期望转向曲线可行域的上、下边界,确保期望转向曲线的可跟踪性;针对系统扰动不确定性及油液泄漏非线性,基于组合趋近律滑模控制,并引入饱和函数代替符号函数,在一定程度上抑制了控制系统的抖振;由于组合趋近律增益自适应性不足,导致车轮转角及角速度发生变化时,存在系统动态响应能力差的问题,通过分析车轮转角、角速度与趋近律增益的关系,制定了基于车轮转角及角速度的模糊规则表以自适应调整趋近律增益,实现增益模糊滑模控制,进一步提高油液补偿自适应能力和线控液压转向系统的鲁棒性;最后基于MATLAB/Simulink进行了仿真和试验验证。结果表明：提出的基于转向效率的期望转向曲线均具有良好的可跟踪性能;增益模糊滑模变结构控制具有良好的动态响应特性及控制精度,可有效地消除转向偏差,实现线控液压转向系统的同步转向。     

An Active Roll-Moment Control Strategy for Narrow Tilting Commuter Vehicles

An automatic tilt control strategy for a narrow commuter vehicle is described. Such a vehicle would be enclosed like a conventional car but would bank into turns like a motorcycle and so it would feel quite unconventional to drive. The proposed tilt control system uses the steering to tilt the car over like a motorcycle but this is augmented by actively generating a rolling moment about the pivot axis between the tilting upper body and non-tilting base. The provision of this active direct tilt control enables the vehicle to remain upright at low or zero speed and also permits the designer to fine tune the transient roll response. Although it appears complex the proposed tilting control relies on only a few simple sensor measurements, some modest, microprocessor based signal processing and low power, low bandwidth steering and tilt control actuators which might be derived from existing automotive components.