Combined control of a regenerative braking and antilock braking system for hybrid electric vehicles

Most parallel hybrid electric vehicles (HEV) employ both a hydraulic braking system and a regenerative braking system to provide enhanced braking performance and energy regeneration. A new design of a combined braking control strategy (CBCS) is presented in this paper. The design is based on a new method of HEV braking torque distribution that makes the hydraulic braking system work together with the regenerative braking system. The control system meets the requirements of a vehicle longitudinal braking performance and gets more regenerative energy charge back to the battery. In the described system, a logic threshold control strategy (LTCS) is developed to adjust the hydraulic braking torque dynamically, and a fuzzy logic control strategy (FCS) is applied to adjust the regenerative braking torque dynamically. With the control strategy, the hydraulic braking system and the regenerative braking system work synchronously to assure high regenerative efficiency and good braking performance, even on roads with a low adhesion coefficient when emergency braking is required. The proposed braking control strategy is steady and effective, as demonstrated by the experiment and the simulation.     

分布式驱动电动汽车回馈制动失效的液压补偿控制

分布式驱动电动汽车各驱动轮转速和转矩可以单独精确控制,便于实现整车动力学控制和制动能量回馈,从而提升车辆的主动安全性和行驶经济性。但车辆在回馈制动过程中,一旦1台电机突发故障,其他电机产生的制动力矩将对整车形成附加横摆力矩,从而造成车辆失稳,此时虽可通过截断异侧对应电机制动力矩输出来保证行驶方向,但会使车辆制动力大幅衰减或丧失,同样不利于行车安全。为了解决此问题,提出并验证一种基于电动助力液压制动系统的制动压力补偿控制方法,力图有效保证整车制动安全性。以轮毂电机驱动汽车为例,首先建立了整车动力学模型以及轮毂电机模型,通过仿真验证了回馈制动失效的整车失稳特性以及电机转矩截断控制的不足;然后,建立了电动助力液压制动系统模型,并通过原理样机的台架试验验证了模型的准确性;接着,基于滑模控制算法设计了制动压力补偿控制器,并在单侧电机再生制动失效后的转矩截断控制基础上完成了液压制动补偿控制效果仿真验证;最后,通过实车试验证明了所提控制方法的有效性和实用性。研究结果表明：在分布式驱动电动汽车单侧电机再生制动失效工况下,通过异侧电机转矩截断控制和制动系统的液压主动补偿,能够使车辆快速恢复稳定行驶并满足制动强度需求。     

电动汽车复合制动控制研究现状综述

电动汽车复合制动由电机再生制动与机械摩擦制动两部分构成,其控制性能直接影响车辆的能量利用效率、制动安全性以及舒适性。围绕静态制动转矩分配控制、动态复合制动协调控制、制动换挡控制、智能辅助驾驶中的复合制动控制4个方面的研究现状与关键技术展开综述,并对复合制动控制未来研究方向进行了展望。对文献的梳理分析表明：制动转矩分配决定着复合制动系统能量回收能力与车辆制动稳定性,基于规则的分配策略面对复杂多变工况自适应性欠佳,而基于优化的分配策略各方面性能表现良好,但需要兼顾控制实时性与优化效果;利用电机响应迅速与控制精确的优势完成复合制动协调控制,能够提升制动模式切换过渡工况与紧急制动工况的控制性能,改善驾驶舒适性;制动过程中实施合理换挡可以进一步提升能量回收效率,同时通过补偿控制解决换挡过程中动力中断和转矩冲击等问题,保证换挡平顺性;随着电动汽车智能化和网联化发展,复合制动控制与驾驶人辅助系统相结合有助于在保证系统功能的同时实现能量回收效益最大化。     

Extended-Kalman-filter-based regenerative and friction blended braking control for electric vehicle equipped with axle motor considering damping and elastic properties of electric powertrain

Because of the damping and elastic properties of an electrified powertrain, the regenerative brake of an electric vehicle (EV) is very different from a conventional friction brake with respect to the system dynamics. The flexibility of an electric drivetrain would have a negative effect on the blended brake control performance. In this study, models of the powertrain system of an electric car equipped with an axle motor are developed. Based on these models, the transfer characteristics of the motor torque in the driveline and its effect on blended braking control performance are analysed. To further enhance a vehicle's brake performance and energy efficiency, blended braking control algorithms with compensation for the powertrain flexibility are proposed using an extended Kalman filter. These algorithms are simulated under normal deceleration braking. The results show that the brake performance and blended braking control accuracy of the vehicle are significantly enhanced by the newly proposed algorithms.     

混合动力电动汽车制动系统回馈特性仿真

为了研究混合动力电动汽车(HEV)回馈制动特性,建立了用于城市公交的混合动力电动汽车复合制动系统的仿真模型,提出了回馈制动控制策略,分析了复合制动系统的工作过程,并探讨影响电动汽车制动系统可靠、安全和高效的主要因素,研究电动汽车复合制动系统优化途径。研究结果表明:回馈制动最低车速限值越小,制动能量回收率越大;从回收电动汽车能量角度分析,回馈制动比例应有一个有效范围值;在各种循环工况下,具有回馈制动功能时混合动力电动汽车城市客车单位里程的能量消耗可降低10%~25%。     

并行再生制动系统控制器的设计与开发

分析了混合动力汽车再生制动系统的特点及其应用前景,提出了一种基于并行控制的再生制动控制策略;针对某款并联式混合动力轿车,采用并行再生制动控制策略,进行了制动控制器的软硬件开发;搭建了硬件在环仿真试验系统对控制器进行了硬件在环仿真验证,并对控制器进行了实车测功机试验和实车道路试验。试验结果表明:该控制器运行稳定、可靠,整车平均制动能量回收效率达15%左右,显著提高了汽车的能源利用效率。     

Improvement of drivability and fuel economy with a hybrid antiskid braking system in hybrid electric vehicles

When braking on wet roads, Antilock Braking System (ABS) control can be triggered because the available brake torque is not sufficient. When the ABS system is active, for a hybrid electric vehicle, the regenerative brake is switched off to safeguard the normal ABS function. When the ABS control is terminated, it would be favorable to reactivate the regenerative brake. However, recurring cycles from ABS to motor regenerative braking could occur. This condition is felt to be unpleasant by the driver and has adverse effects on driving stability. In this paper, a novel hybrid antiskid braking system using fuzzy logic is proposed for a hybrid electric vehicle that has a regenerative braking system operatively connected to an electric traction motor and a separate hydraulic braking system. This control strategy and the method for coordination between regenerative and hydraulic braking are developed. The motor regenerative braking controller is designed. Control of regenerative and hydraulic braking force distribution is investigated. The simulation and experimental results show that vehicle braking performance and fuel economy can be improved and the proposed control strategy and method are effective and robust.     

Vehicle Dynamic Control for In-Wheel Electric Vehicles Via Temperature Consideration of Braking Systems

?Vehicle dynamic control (VDC) systems play an important role with regard to vehicle stability and safety when turning. VDC systems prevent vehicles from spinning or slipping when cornering sharply by controlling vehicle yaw moment, which is generated by braking forces. Thus, it is important to control braking forces depending on the driving conditions of the vehicle. The required yaw moment to stabilize a vehicle is calculated through optimal control and a combination of braking forces used to generate the calculated yaw moment. However, braking forces can change due to frictional coefficients being affected by variations in temperature. This can cause vehicles to experience stability problems due an improper yaw moment being applied to the vehicle. In this paper, a brake temperature estimator based on the finite different method (FDM) was proposed with a friction coefficient estimator in order to solve this problem. The developed braking characteristic estimation model was used to develop a VDC cooperative control algorithm using hydraulic braking and the regenerative braking of an in-wheel motor. Performance simulations of the developed cooperative control algorithm were performed through cosimulation with MATLAB/Simulink and CarSim. From the simulation results, it was verified that vehicle stability was ensured despite any changes in the braking characteristics due to brake temperatures.     

能量回收式电涡流缓速器制动策略研究

文章结合电涡流缓速器和再生制动能量回收技术的优点,提出了能量回收式电涡流缓速器制动补偿策略。利用再生制动系统提供的制动力矩为电涡流缓速器在持续制动过程中的制动力矩热衰退予以补偿。以GB12676-2014政策法规为验证标准,车辆在满载情况下在7%的坡道上保持以30km/h的车速匀速行驶5km为仿真目标,对某商用车型进行仿真分析。验证了该策略使得实际产生的总制动力矩始终能满足驾驶员的制动需求,可以延缓电涡流缓速器温升,保障车辆行车安全。     

Cooperative regenerative braking control for front-wheel-drive hybrid electric vehicle based on adaptive regenerative brake torque optimization using under-steer index

In this study, cooperative regenerative braking control of front-wheel-drive hybrid electric vehicle is proposed to recover optimal braking energy while guaranteeing the vehicle lateral stability. In front-wheel-drive hybrid electric vehicle, excessive regenerative braking for recuperation of the maximum braking energy can cause under-steer problem. This is due to the fact that the resultant lateral force on front tire saturates and starts to decrease. Therefore, cost function with constraints is newly defined to determine optimum distribution of brake torques including the regenerative brake torque for improving the braking energy recovery as well as the vehicle lateral stability. This cost function includes trade-off relation of two objectives. The physical meaning of first objective of cost function is to maximize the regenerative brake torque for improving the fuel economy and that of second objective is to increase the mechanical-friction brake torques at rear wheels rather than regenerative brake torque at front wheels for preventing front tire saturation. And weighting factor in cost function is also proposed as a function of under-steer index representing current state of the vehicle lateral motion in order to generalize the constrained optimization problem including both normal and severe cornering situation. For example, as the vehicle approaches its handling limits, adaptation of weighting factor is possible to prioritize front tire saturation over increasing the recuperation of braking energy for driver safety and vehicle lateral stability. Finally, computer simulation of closed loop driver-vehicle system based on Carsim? performed to verify the effectiveness of adaptation method in proposed controller and the vehicle performance of the proposed controller in comparison with the conventional controller for only considering the vehicle lateral stability. Simulation results indicate that the proposed controller improved the performance of braking energy recovery as well as guaranteed the vehicle lateral stability similar to the conventional controller.     

Dynamics characteristics analysis and control of FWID EV

Compared with internal combustion engine (ICE) vehicles, four-wheel-independently-drive electric vehicles (FWID EV) have significant advantages, such as more controlled degree of freedom (DOF), higher energy efficiency and faster torque response of an electric motor. The influence of these advantages and other characteristics on vehicle dynamics control need to be evaluated in detail. This paper firstly analyzed the dynamics characteristics of FWID EV, including the feasible region of vehicle global force, the improvement of powertrain energy efficiency and the time-delays of electric motor torque in the direct yaw moment feedback control system. In this way, the influence of electric motor output power limit, road friction coefficient and the wheel torque response on the stability control, as well as the impact of motor idle loss on the torque distribution method were illustrated clearly. Then a vehicle dynamics control method based on the vehicle stability state was proposed. In normal driving condition, the powertrain energy efficiency can be improved by torque distribution between front and rear wheels. In extreme driving condition, the electric motors combined with the electro-hydraulic braking system were employed as actuators for direct yaw moment control. Simulation results show that dynamics control which take full advantages of the more controlled freedom and the motor torque response characteristics improve the vehicle stability better than the control based on the hydraulic braking system of conventional vehicle. Furthermore, some road tests in a real vehicle were conducted to evaluate the performance of proposed control method.     

Analysis of a regenerative braking system for Hybrid Electric Vehicles using an Electro-Mechanical Brake

The regenerative braking system of the Hybrid Electric Vehicle (HEV) is a key technology that can improve fuel efficiency by 20∼50%, depending on motor size. In the regenerative braking system, the electronically controlled brake subsystem that directs the braking forces into four wheels independently is indispensable. This technology is currently found in the Electronic Stability Program (ESP) and in Vehicle Dynamic Control (VDC). As braking technologies progress toward brake-by-wire systems, the development of Electro-Mechanical Brake (EMB) systems will be very important in the improvement of both fuel consumption and vehicle safety. This paper investigates the modeling and simulation of EMB systems for HEVs. The HEV powertrain was modeled to include the internal combustion engine, electric motor, battery and transmission. The performance simulation for the regenerative braking system of the HEV was performed using MATLAB/Simulink. The control performance of the EMB system was evaluated via the simulation of the regenerative braking of the HEV during various driving conditions.     

Cooperative control of the motor and the electric booster brake to improve the stability of an in-wheel electric vehicle

A cooperative control algorithm for an in-wheel motor and an electric booster brake is proposed to improve the stability of an in-wheel electric vehicle. The in-wheel system was modeled by dividing it into motor and mechanical parts, and the electric booster brake was modeled through tests. In addition, the response characteristics of the in-wheel system and the electric booster brake were compared through a frequency response analysis. In the cooperative control, the road friction coefficient was estimated using the wheel speed, motor torque, and braking torque of each wheel, and the torque limit of the wheel to the road was determined using the estimated road friction coefficient. Based on the estimated road friction coefficient and torque limit, a cooperative algorithm to control the motor and the electric booster brake was proposed to improve the stability of the in-wheel electric vehicle. The performance of the proposed cooperative control algorithm was evaluated through a hardware-in-the-loop simulation (HILS). Furthermore, to verify the performance of the proposed cooperative control algorithm, a test environment was constructed for the anti-lock braking system (ABS) hydraulic module hardware, and the performance of the cooperative control algorithm was compared with that of the ABS by means of a HILS test.     

Wheel slip control with torque blending using linear and nonlinear model predictive control

Modern hybrid electric vehicles employ electric braking to recuperate energy during deceleration. However, currently anti-lock braking system (ABS) functionality is delivered solely by friction brakes. Hence regenerative braking is typically deactivated at a low deceleration threshold in case high slip develops at the wheels and ABS activation is required. If blending of friction and electric braking can be achieved during ABS events, there would be no need to impose conservative thresholds for deactivation of regenerative braking and the recuperation capacity of the vehicle would increase significantly. In addition, electric actuators are typically significantly faster responding and would deliver better control of wheel slip than friction brakes. In this work we present a control strategy for ABS on a fully electric vehicle with each wheel independently driven by an electric machine and friction brake independently applied at each wheel. In particular we develop linear and nonlinear model predictive control strategies for optimal performance and enforcement of critical control and state constraints. The capability for real-time implementation of these controllers is assessed and their performance is validated in high fidelity simulation.     

Effect of regenerative braking energy on battery current balance in a parallel hybrid gasoline-electric vehicle under FTP-75 driving mode

In recent years, a hybrid electric vehicle (HEV) has been considered a successful technology. Especially, in case of a full HEV, the motor can drive the vehicle by itself at low velocity or assist the engine at high load. To improve the hybrid electric vehicle’s efficiency, a regenerative braking system is also applied to recover from kinetic energy. In this study, an experimental control apparatus was set up with a parallel hybrid electric vehicle mounted on a chassis dynamometer to measure ECU (engine control unit) and MCU (motor control unit) signals, including the current and state of charge in the battery. In order to analyze regenerative braking characteristics, user define braking driving cycle was introduced and carried out using different initial velocities and braking times. The FTP 75 driving cycle was then adapted under different initial SOC (state of charge) levels. The experiment data was analyzed in accordance with the vehicle velocity, battery current, instant SOC level, motor RPM, engine RPM, and then vehicle driving mode was decided. In case of braking driving cycle, it was observed that SOC were increased up to 1.5 % when the braking time and the velocidy were 6 second and 60 km/h, respectively. In addition, using the FTP 75 driving cycle, mode 1 was most frequently operated at SOC 65 conditions in phase 1. In phase 2, due to frequent stop-go hills, percentage of mode 1 was increase by 22 %. Eventually, despite of identity, it was shown that the characteristics of phase 3 differed from phase 1 due to the evanishment of the effects of initial SOCs.     

Lateral stability control of dynamic steering for dual motor drive high speed tracked vehicle

In this paper, the torque and power required by dual motors for electric tracked vehicle during dynamic steering maneuvers with different steering radiuses are analyzed. A steering coupling drive system composed of a new type of center steering motor, two Electromagnetic (EM) clutches, two planetary gear couplers, and two propulsion motors is proposed for the dual motors drive high speed electric tracked vehicle (2MHETV), which aims to improve its lateral stability. An average torque direct distribution control strategy based on steering coupling and an optimization-distribution-based close-loop control strategy are designed separately to control the driving torque or regenerative braking torque of two propulsion motors for vehicle stability enhancement. Then models of the 2MHETV and the proposed control strategy are established in Recudyn and Matlab/Simulink respectively to evaluate the lateral stability of dynamic steering for the 2MHETV with different steering radiuses on hard pavement.The simulation results show that the lateral stability of the 2MHETV can be significantly improved by the proposed optimization-distribution-based close-loop control strategy based on steering coupling system.     

Transient switching control strategy from regenerative braking to anti-lock braking with a semi-brake-by-wire system

Regenerative braking is an important technology in improving fuel economy of an electric vehicle (EV). However, additional motor braking will change the dynamic characteristics of the vehicle, leading to braking instability, especially when the anti-lock braking system (ABS) is triggered. In this paper, a novel semi-brake-by-wire system, without the use of a pedal simulator and fail-safe device, is proposed. In order to compensate for the hysteretic characteristics of the designed brake system while ensure braking reliability and fuel economy when the ABS is triggered, a novel switching compensation control strategy using sliding mode control is brought forward. The proposed strategy converts the complex coupling braking process into independent control of hydraulic braking and regenerative braking, through which a balance between braking performance, braking reliability, braking safety and fuel economy is achieved. Simulation results show that the proposed strategy is effective and adaptable in different road conditions while the large wheel slip rate is triggered during a regenerative braking course. The research provides a new possibility of low-cost equipment and better control performance for the regenerative braking in the EV and the hybrid EV.     

基于电机最优回馈转矩曲线的制动控制策略

本文中首先基于电机等效电路模型,分析了车用内置式永磁同步电机的耗能制动状态和回馈制动状态;然后根据电机矢量控制原理,对控制电流指令进行解析,并经试验数据的验证;接着计算得到永磁同步电机最优回馈转矩曲线,并据此提出一种制动回馈能量最优的串联制动控制策略。最后针对某P4并联混合动力商用车,仿真分析了在C?WTVC、CHTC?TT循环工况和试验采集到的某段省道工况下,并联制动和所提出的串联最优制动控制策略下的百公里油耗和制动回收能量。结果表明,与并联制动控制相比,基于电机最优回馈转矩曲线的串联制动控制策略可降低油耗,并回收更多的制动能量,实现制动回收能量和燃油经济性的提升。     

CVT混合动力汽车再生制动控制策略与仿真分析

分析了混合动力汽车制动过程中发动机反拖制动和CVT速比控制对车辆再生制动性能的影响,提出了低制动强度下仅由电机再生制动、高制动强度下电机与制动器共同制动和紧急制动时发动机参与制动的再生制动策略。对典型工况进行了再生制动仿真,仿真结果表明,CVT速比控制可使电机运行在高效区,从而获得了比传统手动变速混合动力汽车更好的制动能量回收效果。     

ISG hybrid powertrain: a rule-based driver model incorporating look-ahead information

According to European regulations, if the amount of regenerative braking is determined by the travel of the brake pedal, more stringent standards must be applied, otherwise it may adversely affect the existing vehicle safety system. The use of engine or vehicle speed to derive regenerative braking is one way to avoid strict design standards, but this introduces discontinuity in powertrain torque when the driver releases the acceleration pedal or applies the brake pedal. This is shown to cause oscillations in the pedal input and powertrain torque when a conventional driver model is adopted. Look-ahead information, together with other predicted vehicle states, are adopted to control the vehicle speed, in particular, during deceleration, and to improve the driver model so that oscillations can be avoided. The improved driver model makes analysis and validation of the control strategy for an integrated starter generator (ISG) hybrid powertrain possible.