Haptic steering support for driving near the vehicle’s handling limits; skid-pad case

Current vehicle dynamic control systems from simple yaw control to high-end active steering support systems are designed to primarily actuate on the vehicle itself, rather than stimulate the driver to adapt his/her inputs for better vehicle control. The driver though dictates the vehicle’s motion, and centralizing him/her in the control loop is hypothesized to promote safety and driving pleasure. Exploring the above statement, the goal of this study is to develop and evaluate a haptic steering support when driving near the vehicle’s handling limits (Haptic Support Near the Limits; HSNL). The support aims to promote the driver’s perception of the vehicle’s behaviour and handling capacity (the vehicle’s internal model) by providing haptic (torque) cues on the steering wheel. The HSNL has been evaluated in (a) driving simulator tests and (b) tests with a vehicle (Opel Astra G/B) equipped with a variable steering feedback torque system. Drivers attempted to achieve maximum velocity while trying to retain control in a circular skid-pad. In the simulator (a) 25 subjects drove a vehicle model parameterised as the Astra on a dry skid-pad while in (b) 17 subjects drove the real Astra on a wet skid-pad. Both the driving simulator and the real vehicle tests led to the conclusion that the HSNL assisted subjects to drive closer to the designated path while achieving effectively the same speed. With the HSNL the drivers operated the tires in smaller slip angles and hence avoided saturation of the front wheels’ lateral forces and excessive understeer. Finally, the HSNL reduced their mental and physical demand.     

Evaluation of preview G-Vectoring control to decelerate a vehicle prior to entry into a curve

This paper describes the development of the braking assistance system based on a “G-Vectoring” concept. The present work focuses in particular on “Preview G-Vectoring Control” (PGVC), which is based on the “G-Vectoring Control” (GVC) scheme. In GVC, the longitudinal-acceleration control algorithm is based on the actual lateral jerk. PGVC decelerates a vehicle before it enters a curve, and is based on a new longitudinal-acceleration control algorithm which uses predicted and actual lateral jerk. Using the predicted lateral jerk makes it possible to decelerate the vehicle prior to curve entry. This deceleration can emulate a driver’s deceleration as the vehicle approaches a curve entry. PGVC is based on such deceleration algorithms and enables automatic deceleration similar to the action of a driver. It is thus possible to significantly improve the driver’s feeling when this system is activated. Driving tests with this new control system on snowy-winding course confirmed that the automatic brake control quality improved considerably compared to manual driver control considering both lap time and ride quality. These results indicate that PGVC can be a useful braking assistance system not only to improve the driver’s handling performance but also to reduce the brake-task during driving on winding roads.     

Lane-keeping benefits of practical rear axle steer

The classic two-degree-of-freedom yaw-plane or ‘bicycle’ vehicle model is augmented with two additional states to describe lane-keeping behaviour and further augmented with an additional control input to steer the rear axle. A simple driver model is hypothesised where the driver closes a loop on a projected lateral lane position. The driver can select the preview distance to compensate driver/vehicle dynamics, consistent with the ‘cross-over’ model found in the literature. A rear axle steer control law is found to be a function of the front axle steering input and vehicle speed that exhibits stability similar to a positive-real system, while at the same time improving the ability of the driver/vehicle system to track a complex curved lane and improving steady-state manoeuvrability. The theoretically derived control law bears similarity to practical embodiments allowing a deeper understanding of the functional value of steering a rear axle.     

Effects of Free-Control Variables on Automobile Handling

SUMMARY

Compared with the fixed-control case, relatively few studies of the effects on handling quality of the nature of the free-control response of an automobile to steering torque inputs have been reported. Prior to reviewing these studies, an attempt is made in this paper to provide a conceptual framework for assessing the results, by drawing on analytical and experimental work concerned with manual control in closed-loop tracking systems. Application of these ideas to the automobile shows that a fixed-control driver strategy is required where precise path control is necessary. Less demanding situations would allow a free-control driving mode. Steering task performance is found to be relatively insensitive to free-control vehicle responses. However, drivers exhibit clear preferences for certain ranges of steering torque gradient, and for rapid responses of steering wheel angle to torque inputs. Vehicle handling variables interact strongly in their effect on driver opinion. For example, the optimum steering torque gradient (in N m/G) decreases, and the optimum steering “stiffness” (in N m/rad) increases, as the fixed-control response sensitivity increases. Within fairly wide ranges, the damping of the free-control oscillatory mode has little effect on handling quality.     

Run-off-road and recovery – state estimation and vehicle control strategies

Despite many advances in vehicle safety technology, traffic fatalities remain a devastating burden on society. With over two-thirds of all fatal single-vehicle crashes occurring off the roadway, run-off-road (ROR) crashes have become the focus of much roadway safety research. Current countermeasures, including roadway infrastructure modifications and some on-board vehicle safety systems, remain limited in their approach as they do not directly address the critical factor of driver behaviour. It has been shown that ROR crashes are often the result of poor driver performance leading up to the crash. In this study, the performance of two control algorithms, sliding control and linear quadratic control, was investigated for use in an autonomous ROR vehicle recovery system. The two controllers were simulated amongst a variety of ROR conditions where typical driver performance was inadequate to safely operate the vehicle. The sliding controller recovered the fastest within the nominal conditions but exhibited large variability in performance amongst the more extreme ROR scenarios. Despite some small sacrifices in lateral error and yaw rate, the linear quadratic controller demonstrated a higher level of consistency and stability amongst the various conditions examined. Overall, the linear quadratic controller recovered the vehicle 25% faster than the sliding controller while using 70% less steering, which combined with its robust performance, indicates its high potential as an autonomous ROR countermeasure.     

四轮转向汽车的控制策略

四轮转向汽车能有效地提高低速时的机动性和高速时的操纵稳定性，从心理上和体力上减轻驾驶员的负担。分析和总结了四轮转向汽车的控制策略及其控制目标，介绍了几种典型的前馈型与反馈型控制方案，指出了四轮转向系统控制所面临的困难，并展望了其发展方向。     

Snowplow Steering Guidance with Gain Stabilization

Acquisition and utilization of lateral guidance information is crucial for steering a vehicle. With practice, drivers can successfully perform the steering function using visual perception and hand-eye coordination. However, this seemingly simple task becomes difficult when the visual information loses its clarity. Driving a snowplow during whiteout conditions is one such example. In order to improve the safety and efficiency of snow removal operations, a supplemental guidance display was proposed and successfully implemented in a California Department of Transportation (Caltrans) snowplow. The guidance information was calculated based on the magnetic markers embedded in the roadway. The crucial step to this success is a transformation of the guidance display problem into a robust driver-in-the-loop control problem. This transformation considers the ‘display’ law as part of the overall driver-steering-control algorithm. Two key ‘assumptions’ for this design are (1) the ‘display’ law should be designed in such a way that drivers can use ‘proportional’ control gain alone to satisfy the performance and stability requirements of the steering tasks, and (2) the driver steering model can be described as a combination of gain and dynamic delay under the display law in (1). This paper describes the validation process for the ‘gain’ stabilization design concept as well as the associated driver steering model using the initial snowplow test data.     

Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle–driver (and more generally, human–machine) dynamic interaction.     

Application of Elementary Neural Networks and Preview Sensors for Representing Driver Steering Control Behaviour

This paper demonstrates the use of elementary neural networks for modelling and representing driver steering behaviour in path regulation control tasks. Areas of application include uses by vehicle simulation experts who need to model and represent specific instances of driver steering control behaviour, potential on-board vehicle technologies aimed at representing and tracking driver steering control behaviour over time, and use by human factors specialists interested in representing or classifying specific families of driver steering behaviour. Example applications are shown for data obtained from a driver/vehicle numerical simulation, a basic driving simulator, and an experimental on-road test vehicle equipped with a camera and sensor processing system.     

MPC-BASED steering control for backward-driving vehicle using stereo vision

We propose a steering control algorithm for autonomous backward driving in a narrow corridor. Passable spaces are detected using a stereo camera, and the steering angle is controlled by a model predictive controller (MPC). For passable space detection, an UV-disparity map is calculated from the original disparity map. Information regarding passable spaces collected by the stereo camera is used in steering control. Backward driving requires the driver’s preemptive actions, which can be learned by experience because of the non-intuitive responses (the initial motion of the vehicle is opposite to the driver’s steering angle input). This occurs because a backward-driving vehicle is a non-minimum phase system. One of the most popular steering control algorithms is Stanley method, which is based on the feedback of lateral displacement error and heading angle error. The method is very intuitive and works well for forward driving, but it exhibits significant undershoot for backward driving cases. Furthermore, the method does not explicitly consider any constraints on control inputs and states. We designed a steering controller based on the MPC technique that requires future information but can handle constraints explicitly. Because we have near-future information from the stereo camera under limited passable spaces, MPC can be effectively implemented. We performed several simulations and experiments to show the performance and superiority of the suggested method over a simple feedback-based control algorithm.     

Comparing and validating models of driver steering behaviour in collision avoidance and vehicle stabilisation

A number of driver models were fitted to a large data set of human truck driving, from a simulated near-crash, low-friction scenario, yielding two main insights: steering to avoid a collision was best described as an open-loop manoeuvre of predetermined duration, but with situation-adapted amplitude, and subsequent vehicle stabilisation could to a large extent be accounted for by a simple yaw rate nulling control law. These two phenomena, which could be hypothesised to generalise to passenger car driving, were found to determine the ability of four driver models adopted from the literature to fit the human data. Based on the obtained results, it is argued that the concept of internal vehicle models may be less valuable when modelling driver behaviour in non-routine situations such as near-crashes, where behaviour may be better described as direct responses to salient perceptual cues. Some methodological issues in comparing and validating driver models are also discussed.     

Driver steering and muscle activity during a lane-change manoeuvre

The article reports an experimental study of driver steering control behaviour in a lane-change manoeuvre. Eight test subjects were instrumented with electromyography to measure muscle activation and co-contraction. Each subject completed 30 lane-change manoeuvres with one vehicle on a fixed-base driving simulator. For each driver, the steering torque feedback characteristic was changed after every ten manoeuvres; the response of the vehicle to steering angle inputs was not changed. Drivers' control strategies were found to be robust to changes in steering torque feedback. Path-following errors, muscle activity and muscle co-contraction all reduce with the number of lane-changes performed by the driver, suggesting the existence of a learning process. Comparing the test subjects, there was some evidence that high levels of co-contraction were used to allow high-frequency steering inputs to be generated. The results contribute to the understanding of vehicle-driver (and more generally, human-machine) dynamic interaction.     

认知分心对车辆跟驰过程操控安全性的影响

为了研究车辆跟驰过程中驾驶人认知分心与驾驶安全的关系,采用驾驶模拟器构建城市道路车辆跟驰场景,并设计3种难度等级的认知分心次任务,采集35名被试驾驶人在试验过程中的方向盘转角、油门开度、制动踏板力等操作参数,以及车辆位置、速度、加速度等车辆运动参数。采用重复测量一般线性模型,分析不同等级认知分心对上述参数的影响。研究结果表明：在横向操控方面,随着认知分心程度增高,方向盘回转率增大,但车辆横向位置标准差减小,表明驾驶人处于认知分心时,采取频繁修正方向盘的补偿方式,降低车辆横向位置波动,过度补偿车辆横向安全性,且该补偿行为与认知分心程度正相关;在纵向操控方面,认知分心时,油门开度、制动踏板位置方差增大,且制动踏板位置均值增大,同时车头间距及时距未观察到显著性变化,表明认知分心时驾驶人采取频繁操作油门、制动踏板,增大制动幅度等方式进行补偿,使车头间距及车头时距等表征车辆纵向跟车安全性参数处于正常驾驶水平,但加速度标准差增大,表明跟车稳定性降低。研究结果为涉及分心的人车交互装置优化设计及考虑分心状态的驾驶人状态管理系统开发提供了一定的理论依据。     

Sensitivity of Driver-Vehicle Performance to Vehicle Characteristics Revealed in Open-loop Tests

The advantages of being able to objectively specify desirable vehicle handling characteristics, which can be determined without recourse to closed-loop tests on a prototype vehicle, are widely recognised. This paper reviews the studies that have attempted to find a relationship between closed-loop task performance, and driver subjective opinion, and various steady-state and transient characteristics revealed in open-loop tests of the vehicle. It is found that the level of definition of these relationships is not sufficient to justify mandatory regulations for vehicle design. However, the basic requirements for steering control sensitivity, and the rapidity and stability of the fixed-control dynamic response of vehicles in normal manoeuvres, are beginning to emerge. Data are particularly lacking for the closed-loop effects of vehicle sideslipping characteristics, free-control responses and vehicle behaviour in limit manoeuvres.     

Steering disturbance rejection using a physics-based neuromusculoskeletal driver model

The aim of this work is to develop a comprehensive yet practical driver model to be used in studying driver–vehicle interactions. Drivers interact with their vehicle and the road through the steering wheel. This interaction forms a closed-loop coupled human–machine system, which influences the driver's steering feel and control performance. A hierarchical approach is proposed here to capture the complexity of the driver's neuromuscular dynamics and the central nervous system in the coordination of the driver's upper extremity activities, especially in the presence of external disturbance. The proposed motor control framework has three layers: the first (or the path planning) plans a desired vehicle trajectory and the required steering angles to perform the desired trajectory; the second (or the musculoskeletal controller) actuates the musculoskeletal arm to rotate the steering wheel accordingly; and the final layer ensures the precision control and disturbance rejection of the motor control units. The physics-based driver model presented here can also provide insights into vehicle control in relaxed and tensed driving conditions, which are simulated by adjusting the driver model parameters such as cognition delay and muscle co-contraction dynamics.     

Advanced Steering System Adaptable to Lateral Control Task and Driver's Intention

This paper proposes an advanced steering system that adaptively varies the static gain and dynamics of the steering system. The steering system gain is adjusted, depending on whether the driver is in an aggressive or leisurely driving mood. The steering system dynamics is so designed that the command mode of the steering system will be either a rate-command or an attitude-command according to the lateral control task performed by the driver. The recognition system for lateral control tasks, a lane-following or lane-change task is proposed. The findings of simulator tests indicate proposed advanced steering system would remarkably improve the vehicle handling qualities.     

Advanced Steering System Adaptable to Lateral Control Task and Driver's Intention

This paper proposes an advanced steering system that adaptively varies the static gain and dynamics of the steering system. The steering system gain is adjusted, depending on whether the driver is in an aggressive or leisurely driving mood. The steering system dynamics is so designed that the command mode of the steering system will be either a rate-command or an attitude-command according to the lateral control task performed by the driver. The recognition system for lateral control tasks, a lane-following or lane-change task is proposed. The findings of simulator tests indicate proposed advanced steering system would remarkably improve the vehicle handling qualities.     

A path-following driver–vehicle model with neuromuscular dynamics,including measured and simulated responses to a step in steering angle overlay

An existing driver–vehicle model with neuromuscular dynamics is improved in the areas of cognitive delay, intrinsic muscle dynamics and alpha–gamma co-activation. The model is used to investigate the influence of steering torque feedback and neuromuscular dynamics on the vehicle response to lateral force disturbances. When steering torque feedback is present, it is found that the longitudinal position of the lateral disturbance has a significant influence on whether the driver’s reflex response reinforces or attenuates the effect of the disturbance. The response to angle and torque overlay inputs to the steering system is also investigated. The presence of the steering torque feedback reduced the disturbing effect of torque overlay and angle overlay inputs. Reflex action reduced the disturbing effect of a torque overlay input, but increased the disturbing effect of an angle overlay input. Experiments on a driving simulator showed that measured handwheel angle response to an angle overlay input was consistent with the response predicted by the model with reflex action. However, there was significant intra- and inter-subject variability. The results highlight the significance of a driver’s neuromuscular dynamics in determining the vehicle response to disturbances.     

An Advanced Steering System with Active Kinesthetic Feedback for Handling Qualities Improvement

SUMMARY

Advanced Steering System with artificial steering wheel torque-active kinesthetic information feedback for improving handling qualities is discussed. Fundamentally the structure of the system may be considered to another form of model following control. In this system, a driver always remains in the control loop and receives steering control information which give him/her a direct hint to steer a steering wheel. This system works as a stability and control augmentation system of the vehicle to improve the vehicle handling qualities both in compensatory and pursuit control task, and is expected to reduce driver's workload. Effects of this system are analyzed in terms of man-machine system characteristics. Identification of driver dynamics was carried out to find why such improvement could be achieved. Availability of the proposed system is verified by analysis, simulator and proving ground tests.     

eTS fuzzy driver model for simultaneous longitudinal and lateral vehicle control

In this paper, evolving Takagi-Sugeno (eTS) fuzzy driver model is proposed for simultaneous lateral and longitudinal control of a vehicle in a test track closed to traffic. The developed eTS fuzzy driver model can capture human operator’s driving expertise for generating desired steering angle, throttle angle and brake pedal command values by processing only information which can be supplied by the vehicle’s on-board control systems in real time. Apart from other fuzzy rule based (FRB) models requiring human expert knowledge or off-line clustering, the developed eTS driver model can adapt itself automatically, even ‘from scratch’, by an on-line learning process using eTS algorithm while human driver is supervising the vehicle. Proposed eTS fuzzy driver model’s on-line human driver identification capability and autonomous vehicle driving performance were evaluated on real road profiles created by digitizing two different intercity express ways of Turkey in IPG© CarMaker® software. The training and validation simulation results demonstrated that eTS fuzzy driver model can be used in product development phase to speed up different tests via realistic simulations. Furthermore eTS fuzzy driver model has an application potential in the field of autonomous driving.