Urban road traffic noise spatiotemporal distribution mapping using multisource data

Many residents are disturbed by road traffic noise which needs to be controlled and managed. The noise map is a helpful and important tool for noise management and acoustical planning in urban areas. However, the static noise map is not sufficient for evaluating noise annoyance at different temporal periods. It is necessary to develop the dynamic noise map or the noise spatiotemporal distribution. In this study, a method about urban road traffic noise spatiotemporal distribution mapping is proposed to obtain the representative road traffic noise maps of different periods. This method relies on the proposed noise spatiotemporal distribution model with two time-dependent variables - traffic density and traffic speed, and the spatiotemporal characteristics derived from multisource data. There are three steps in the method. First, the urban road traffic noise spatiotemporal distribution model is derived from the law of sound propagation. Then, the temporal characteristics are extracted from traffic flow detecting data and E-map road segment speed data by the outlier detection analysis. Finally, the noise distributions corresponding to different periods are calculated by an efficient algorithm which can save 90% above of the computing time. Moreover, a validation experiment was conducted to evaluate the accuracy of the proposed method. There is only 2.26-dB[A] mean absolute error that is within an acceptable range, which shows that the method is effective.     

Tyre/road noise damping characteristics using nomographs and fundamental vibroacoustical relationships

Several studies have successfully developed laboratory and field measurement techniques to estimate tyre/road noise damping characteristics. However, laboratory–field noise correlations of pavement types in the form of nomographs is essential to cognize the pavements’ acoustical properties from a practical perspective. A toolkit that readily provides field tyre/road noise intensity of different pavement materials is needed. Thus, the main objective of this study was to develop nomographs with relationships for tyre/road noise versus pavement materials’ viscoelastic–vibroacoustical properties. Isothermal and isochronal nomographs of phase angle–tyre/road noise as toolkits were developed based upon well-established phase angle and noise intensities typical of mixtures, making the nomograph correlations very authentic, realistic, and novel along with benefit to predict tyre/road noise at any desired temperature and traffic speed (or frequency) combination. This study is envisaged to benefit in the discernment of road materials’ damping capabilities from vibroacoustical and field noise–viscoelastic relation aspects.     

A traffic noise model for road intersections in the city of Cartagena de Indias,Colombia

Road traffic noise models are fundamental tools for designing and implementing appropriate prevention plans to minimize and control noise levels in urban areas. The objective of this study is to develop a traffic noise model to simulate the average equivalent sound pressure level at road intersections based on traffic flow and site characteristics, in the city of Cartagena de Indias (Cartagena), Colombia. Motorcycles are included as an additional vehicle category since they represent more than 30% of the total traffic flow and a distinctive source of noise that needs to be characterized. Noise measurements are collected using a sound level meter Type II. The data analysis leads to the development of noise maps and a general mathematical model for the city of Cartagena, Colombia, which correlates the sound levels as a function of vehicle flow within road intersections. The highest noise levels were 79.7 dB(A) for the road intersection María Auxiliadora during the week (business days) and 77.7 dB(A) for the road intersection India Catalina during weekends (non-business days). Although traffic and noise are naturally related, the intersections with higher vehicle flow did not have the highest noise levels. The roadway noise for these intersections in the city of Cartagena exceeds current limit standards. The roadway noise model is able to satisfactorily predict noise emissions for road intersections in the city of Cartagena, Colombia.     

Development and implementation of the areawide Dynamic ROad traffic NoisE (DRONE) simulator

This paper discusses the areawide Dynamic ROad traffic NoisE (DRONE) simulator, and its implementation as a tool for noise abatement policy evaluation. DRONE involves integrating a road traffic noise estimation model with a traffic simulator to estimate road traffic noise in urban networks. An integrated traffic simulation-noise estimation model provides an interface for direct input of traffic flow properties from simulation model to noise estimation model that in turn estimates the noise on a spatial and temporal scale. The output from DRONE is linked with a geographical information system for visual representation of noise levels in the form of noise contour maps.     

Heteroscedastic Gaussian processes for uncertainty modeling in large-scale crowdsourced traffic data

Accurately modeling traffic speeds is a fundamental part of efficient intelligent transportation systems. Nowadays, with the widespread deployment of GPS-enabled devices, it has become possible to crowdsource the collection of speed information to road users (e.g. through mobile applications or dedicated in-vehicle devices). Despite its rather wide spatial coverage, crowdsourced speed data also brings very important challenges, such as the highly variable measurement noise in the data due to a variety of driving behaviors and sample sizes. When not properly accounted for, this noise can severely compromise any application that relies on accurate traffic data. In this article, we propose the use of heteroscedastic Gaussian processes (HGP) to model the time-varying uncertainty in large-scale crowdsourced traffic data. Furthermore, we develop a HGP conditioned on sample size and traffic regime (SSRC-HGP), which makes use of sample size information (probe vehicles per minute) as well as previous observed speeds, in order to more accurately model the uncertainty in observed speeds. Using 6 months of crowdsourced traffic data from Copenhagen, we empirically show that the proposed heteroscedastic models produce significantly better predictive distributions when compared to current state-of-the-art methods for both speed imputation and short-term forecasting tasks.     

Estimation of road traffic noise emissions: The influence of speed and acceleration

This paper relies on vehicle trajectory collection on a corridor, to compare different traffic representations used for the estimation of the sound power of light vehicles and the resulting sound pressure levels. Four noise emission models are tested. The error introduced when the emissions are calculated based on speeds measured at regular intervals along the road network are quantified and explained. The current noise emission models might in particular misestimate noise levels under congestion. This bias can be reduced by introducing additional traffic variables in the modeling. In addition, significant differences within the models are highlighted, especially concerning their accounting of vehicle accelerations. Models that rely on a binary representation of acceleration regimes (a vehicle or a road segment is accelerating or not) can lead to errors in practice. Models under use in Europe have a very low sensitivity to acceleration values. These results help underlying the further required improvements of dynamic road traffic noise models.     

Options for reducing noise from roads and railway lines

The fundamental noise generation mechanisms of road and rail vehicles are discussed with attention to noise abatement measures. Based on an evaluation of publicly available tire noise data and the European road traffic noise emission model CNOSSOS, it is shown that on the road side there is a significant noise reduction potential in the usage of low-noise tires. From a three months measurement campaign a noise model was derived to predict the maximal sound pressure level of heavy duty vehicles during a pass-by in 7.5 m distance with the parameters vehicle speed and number of axles. With help of recently published information about external costs caused by heavy duty vehicles and the noise prediction tool, a model was developed to derive a money equivalent that can be used as a bonus/malus in a heavy duty vehicle fee. As a measure at the infrastructure, the installation of low-noise pavements is an effective, durable and economically attractive measure. Recent experiences with different technologies from all over the world are compiled and evaluated. On the rail side, an overview of the possible noise reduction strategies is given, followed by a discussion of the current policy and legislation in the EU and on the national level of different European countries.     

Time-series model for vehicle speeds

This paper presents a time-series model for the spot speeds of vehicles on a road section. Based on time-series analysis techniques, the model incorporates information on the extent of existing dependency between the speeds of successive vehicles. The model for the data is chosen while relying heavily on the data, and thus emphasis is given to their special characteristics. The advantages of using the model are examined with regard to the relative speed of two successive vehicles along a road section. The results are compared with those obtained by using a model of independent observations; fewer errors are obtained with the time-series model. Therefore, it is concluded that the sequence of speed observations contains valuable information which should be incorporated into speed models.     

高原地区公路运行速度模型研究

文章基于对青藏公路车辆运行速度、车辆组成的调查,采用层次分析法对不同车辆组成、不同路段速度进行分析,建立了不同车辆组成下的运行速度模型,并结合交通事故数据,提出了确保交通安全的常年冻土区公路运行速度值。该运行速度模型的应用研究,为减少道路交通事故提供了一种新思路。     

A unified framework for estimating or updating origin/destination matrices from traffic counts

This paper presents an in-depth study of the methodology for estimating or updating origin-to-destination trip matrices from traffic counts. Following an analysis of the statistical foundation of the estimation and updating problems, various basic approaches are reviewed using a generic traffic assignment map. Computational issues related to specific assignment maps and estimation models for both road and transit networks are then discussed. Finally, additional insight into the relative performance of several estimators is provided by a set of test problems with varying input data.     

Energy factors for flexible fuel engines and vehicles operating with gasoline-ethanol blends

This work investigates the energy factors for fuel conversion from the analysis of brake specific fuel consumption (BSFC) maps of a sample of 15 engines, representative of 75% of current models available in the Brazilian market. The method also employs the engine driving patterns of power output versus crankshaft speed obtained from bench dynamometer tests. The energy factors obtained from the engine analysis was validated against experiments carried out with two production vehicles in laboratory tests following the 1975 US Federal Test Procedure (FTP-75) procedure and road tests following 16 different urban and highway routes. The fuels used in the tests were hydrous ethanol (E100, 6 v/v % water) and a blend of 22 v/v % anhydrous ethanol and 78 v/v % gasoline (E22). The energy factors found from the 3D engine BSFC map analysis were higher than those obtained from the Willans line, currently adopted as a standard, by 52% for E22 and 57% for E100. The results from the 3D engine BFSC maps and the first vehicle following the FTP-75 cycle and 15 road routes were similar, also close to the results from the second vehicle, qualifying them to be representative of modern flexible fuel spark ignition engines and vehicles.     

Does winter road maintenance help reduce air emissions and fuel consumption?

Winter road maintenance (WRM) has been shown to have significant benefits of improving road safety and reducing traffic delay caused by adverse weather conditions. It has also been suggested that WRM is also beneficial in terms of reducing vehicular air emissions and fuel consumptions because snow and ice on road surface often cause the drivers to reduce their vehicle speeds or to switch to high gears, thus decreasing fuel combustion efficiency. However, there has been very limited information about the underlying relationship, which is important for quantifying this particular benefit of a winter road maintenance program. This research is focused on establishing a quantitative relationship between winter road surface conditions and vehicular air emissions. Speed distribution models are developed for the selected Ontario highways using data from 22 road sites across the province of Ontario, Canada. The vehicular air emissions under different road surface conditions are calculated by coupling the speed models with the engine emission models integrated in the emission estimation model - MOVES. It was found that, on the average, a 10% improvement in road surface conditions could result in approximately 0.6–2% reduction in air emissions. Application of the proposed methodology is demonstrated through a case study to analyse the air emission and energy consumption effects under specific weather events.     

Modelling of the pavement acoustic longevity in Hong Kong through machine learning techniques

Traffic noise emission has long been a pervasive environmental and ecological problem, especially in the metropolitan cities with large-scale traffic network and high population density. Low noise road surface (LNRS) has been actively developed and applied as an effective measure to maintain the quieter environment of mobility service system. However, when LNRS is applied for noise abatement, the relationship between the acoustic performance and degradation of pavement has not been fully understood yet. To this end, this study aims to model the acoustic longevity of asphalt pavement as a function of the thickness, binder content, maximum aggregate size, and air void content of the pavement surface, as well as vehicle speed based on the long-term tyre-road noise data collected from 270 asphalt pavement sections in Hong Kong. Two machine learning techniques, namely artificial neural networks (ANN) and support vector machines (SVM), were employed and compared. It was found that both ANN and SVM could successfully model the pavement acoustic performance with acceptable model performance metrics. A case study showed that the ANN model was more aligned with the aging mechanisms of porous road surface, but the SVM model showed better training performance. The predicted acoustic deterioration rates of the porous surface case varied from −0.1 to 0.28 dB(A)/month rather than keeping a constant linear increasing trend, depending on pavement ageing periods and vehicle speed levels. The two-dimension sensitivity analysis (2D-SA) revealed the relative importance of pavement age and vehicle speed in controlling the acoustic performance.     

Modeling time mean speed and space mean speed for heterogeneous traffic conditions

This paper analyzes vehicular speeds at a micro level and studies the relationships between the important elements of speed, namely space mean speed (SMS) and time mean speed (TMS) under heterogeneous traffic conditions. Vehicular speed data were collected at selected road stretches around Delhi, India, in an attempt to understand and model the type of relationships between SMS and TMS under heterogeneous traffic conditions. To demonstrate the superiority of the proposed models, comparisons are made with existing traditional models. The results reveal that the proposed models are consistent in predicting speeds with high accuracy.     

Improving noise assessment at intersections by modeling traffic dynamics

Three families of road noise prediction models can be distinguished. Static noise models only consider free-flow constant-speed traffic with uniformly distributed vehicles. Analytic noise models assume that all vehicles are isolated from one another but account for their mean kinematic profile over the network. Micro-simulation noise models relax the hypothesis of no interaction between vehicles and fully capture traffic flow dynamic effects such as queue evolution. This study compares the noise levels obtained by these three methodologies at signalized intersections and roundabouts. It reveals that micro-simulation noise models outperform the other approaches. Particularly, they are able to capture the effects of stochastic transient queues in under-saturated conditions as well as stop-and-go behaviors in oversaturated regime. Accounting for traffic dynamics is also shown to improve predictions of noise variations due to different junction layouts. In this paper, a roundabout is found to induce a 2.5 dB(A) noise reduction compared to a signalized intersection in under-saturated conditions while the acoustic contributions of both kinds of junctions balance in oversaturated regime.     

Impact of horizontal geometric design of two-lane rural roads on vehicle co2 emissions

In 2014, highway vehicles accounted for 72.8% of all Greenhouse Gases emissions from transportation in Europe. In the United States (US), emissions follow a similar trend. Although many initiatives try to mitigate emissions by focusing on traffic operations, little is known about the relationship between emissions and road design. It is feasible that some designs may increase average flow speed and reduce accelerations, consequently minimizing emissions.This study aims to evaluate the impact of road horizontal alignment on CO₂ emissions produced by passenger cars using a new methodology based on naturalistic data collection. Individual continuous speed profiles were collected from actual drivers along eleven two-lane rural road sections that were divided into 29 homogeneous road segments. The CO₂ emission rate for each homogeneous road segment was estimated as the average of CO₂ emission rates of all vehicles driving, estimated by applying the VT-Micro model.The analysis concluded that CO₂ emission rates increase with the Curvature Change Rate. Smooth road segments normally allowed drivers to reach higher speeds and maintain them with fewer accelerations. Additionally, smother segments required less time to cover the same distance, so emissions per length were lower. It was also observed that low mean speeds produce high CO₂ emission rates and they increase even more on roads with high speed dispersions.Based on this data, several regression models were calibrated for different vehicle types to estimate CO₂ emissions on a specific road segment. These results could be used to incorporate sustainability principles to highway geometric design.     

Speed variation during peak and off-peak hours on urban arterials in Shanghai

Increased speed variation on urban arterials is associated with reductions in both operational performance and safety. Traffic flow, mean speed, traffic control parameters and geometric design features are known to affect speed variation. An exploratory study of the relationships among these variables could provide a foundation for improving the operational and safety performance of urban arterials, however, such a study has been hampered by problems in measuring speeds. The measurement of speed has traditionally been accomplished using spot speed collection methods such as radar, laser and loop detectors. These methods can cover only limited locations, and consequently are not able to capture speed distributions along an entire network, or even throughout any single road segment. In Shanghai, it is possible to acquire the speed distribution of any roadway segment, over any period of interest, by capturing data from Shanghai’s 50,000+ taxis equipped with Global Positional Systems (GPS). These data, hereafter called Floating Car Data, were used to calculate mean speed and speed variation on 234 road segments from eight urban arterials in downtown Shanghai. Hierarchical models with random variables were developed to account for spatial correlations among segments within each arterial and heterogeneities among arterials. Considering that traffic demand changes throughout the day, AM peak, Noon off-peak, and PM peak hours were studied separately. Results showed that increases in number of lanes and number of access points, the presence of bus stops and increases in mean speed were all associated with increased speed variation, and that increases in traffic volume and traffic signal green times were associated with reduced speed variation. These findings can be used by engineers to minimize speed differences during the road network planning stage and continuing through the traffic management phase.     

Exploring the impacts of road surface texture on tyre/road noise - A case study in Hong Kong

The impacts of road surface texture on tyre/road noise are explored by analysing field data applying fast Fourier transform technique to tyre/road noise spectrum analysis. The results indicate that the tyre/road noise can be higher at lower frequency bands but lower at higher bands. Cluster analysis on surface texture in terms of wavelength identified three cluster groups that centred at 1.32 mm, 3.65 mm, and 5.11 mm have different impacts on noise. The shorter wavelength group suppressed tyre/road noise, medium group aggravated it and the high wavelength group were outliers.     

Short-term speed predictions exploiting big data on large urban road networks

Big data from floating cars supply a frequent, ubiquitous sampling of traffic conditions on the road network and provide great opportunities for enhanced short-term traffic predictions based on real-time information on the whole network. Two network-based machine learning models, a Bayesian network and a neural network, are formulated with a double star framework that reflects time and space correlation among traffic variables and because of its modular structure is suitable for an automatic implementation on large road networks. Among different mono-dimensional time-series models, a seasonal autoregressive moving average model (SARMA) is selected for comparison. The time-series model is also used in a hybrid modeling framework to provide the Bayesian network with an a priori estimation of the predicted speed, which is then corrected exploiting the information collected on other links. A large floating car data set on a sub-area of the road network of Rome is used for validation. To account for the variable accuracy of the speed estimated from floating car data, a new error indicator is introduced that relates accuracy of prediction to accuracy of measure. Validation results highlighted that the spatial architecture of the Bayesian network is advantageous in standard conditions, where a priori knowledge is more significant, while mono-dimensional time series revealed to be more valuable in the few cases of non-recurrent congestion conditions observed in the data set. The results obtained suggested introducing a supervisor framework that selects the most suitable prediction depending on the detected traffic regimes.     

A new methodology for vehicle trajectory reconstruction based on wavelet analysis

Vehicle trajectories with high spatial and temporal resolution are known as the most ideal source of data for developing innovative microscopic traffic models. Aside from the method applied for collecting the vehicle trajectories, such data are more or less error-infected. The ever-increasing noise amplitude during the process of deriving the data (such as speed and acceleration) required for developing models, might change or even hide the structure of data and lead to useful information being overlooked. This highlights the importance of presenting the efficient methods which are adequate to remove noise and enhance the quality of vehicle trajectory data. Accordingly, in this paper a simple two-step technique based on wavelet analysis has been recommended for filtering errors and reconstructing trajectory data. Primarily, by using wavelet transform a special treatment was employed to identify and modify the outliers. Next, the noise in trajectory data was eliminated by applying the wavelet-based filter. The results of applying the proposed method to the synthetic noise-infected trajectory and the NGSIM dataset reveal how appropriate its performance is compared with other methodologies in terms of quantitative criteria.