共查询到17条相似文献,搜索用时 296 毫秒
1.
2.
3.
舰用齿轮箱抗冲击能力时域计算 总被引:3,自引:0,他引:3
为找出舰船设备的潜在问题或薄弱环节,从而保证舰船的战斗力;以及为避免由于对设备的抗冲击性能不了解即进行冲击试验可能对设备造成的损坏,抗冲击数值模拟分析对于舰用设备是必要的。对舰用齿轮箱抗冲击能力进行时域数值模拟,使用MDT软件建立齿轮箱三维几何模型,利用HyperMesh软件进行前处理以及有限元网格划分,并将有限元模型导入ABAQUS软件,对齿轮箱抗冲击能力进行时域计算。分析数值模拟结果得到了齿轮箱典型部位处冲击响应,总结了齿轮箱抗冲击的一些规律,并找出了齿轮箱结构抗冲击的薄弱环节,为齿轮箱结构优化设计提供了参考。 相似文献
4.
5.
介绍美国海军用以考核舰船设备抗冲击性能的动态设计分析方法(DDAM),利用Ansys软件对某舰用升降装置进行建模,并基于DDAM方法对其进行计算和抗冲击性能分析,分析结果可为舰用升降装置抗冲击设计和评估提供参考. 相似文献
6.
柴油机抗冲击性能实船水下爆炸冲击试验研究 总被引:1,自引:0,他引:1
柴油机是现代舰船主要动力源之一,其抗冲击性能直接影响舰船生命力.舰用柴油机具有体积重量大、附属设备多、运行维护要求高等特点,难以在陆上进行抗冲击台架试验.实船水下爆炸冲击试验是发现舰用柴油机抗冲击薄弱环节,检验舰用柴油机抗冲击性能的有效手段.通过试验中对舰用柴油机进行运行监控、实时测量,以及试验后对柴油机进行拆检分析,初步总结出舰用柴油机的抗冲击薄弱环节,提出舰用柴油机冲击防护设计建议,研究成果可应用于舰船动力设备抗冲击防护措施设计中. 相似文献
7.
8.
燃气轮机作为现代舰船常用的主动力装置,其抗冲击能力是影响舰船生命力的重要因素之一.介绍了一种对舰用燃气轮机抗冲击性的数字仿真技术评估方法,通过对在冲击载荷下的舰用燃气轮机有限元模型进行仿真计算分析,得出燃气轮机抗冲击能力临界线,对其冲击安全性进行评估,可用于舰用燃气轮机抗冲击能力的设计或校核. 相似文献
9.
为找出舰船设备在受冲击时的薄弱环节,保证舰船战斗力,有必要分析舰用设备的抗冲击能力。分析了舰用涡轮机组的抗冲击能力,使用ProE软件建立涡轮机组三维几何模型,并利用HyperMesh软件进行有限元网格划分。将有限元模型导入ABAQUS软件,基于显示求解器对涡轮机组抗冲击能力进行时域计算。结果表明:典型部位轴承的响应更剧烈,压气机主轴的响应则相对复杂,应予以保护;涡轮机组在冲击校核工况下具有足够的安全性,且设备的薄弱环节主要集中在框架与底架搭接处,以及轴承、齿轮啮合齿和连接螺栓处等构件连接部位。 相似文献
10.
11.
12.
Shock resistance capacity of the shipboard equipment especially for large ones, has been a strong concern of navies all over the world for a long time. The shipboard equipment have previously generally been studied separate from hull structure before. In this paper the coupling elastic effect between equipment and hull structure is taken into account. With the ABAQUS software, the integrated model of the equipment coupled with the hull structure is established to study the dynamic response of the shipboard equipment to the shock wave load as well as the bubble pulsation load. In order to verify the numerical method, the simulated results are compared to the experimental data, which are from a specific underwater explosion on an actual ship. On this basis, by changing the charge location, attack angle, equipment installation location and other parameters, the characteristics of dynamic response under different conditions can be obtained. In addition, the results of the integrated calculation and the non-integrated one are compared and the characteristic parameters which affect the equipment shock response are analyzed. Some curves and conclusions are obtained for engineering applications, which provides some insights into the shock resistance of shipboard equipment. 相似文献
13.
14.
舰艇设备抗冲击技术研究 总被引:1,自引:0,他引:1
文章介绍了国外舰船设备抗冲击研究的历史和动态,以及国内抗冲击计算研究现状,并针对目前国内在抗冲击研究中存在的不足,提出了一些建议,可供舰船设备隔振系统非线性抗冲击研究参考。 相似文献
15.
16.
YAO Xiong-liang FENG Lin-han ZHANG A-man ZHOU Qi-xin 《船舶与海洋工程学报》2007,6(4):18-26
The non-linear finite element software ABAQUS was used to simulate the dynamic response of a marine supercharged boiler when subjected to impact loading. Shock resistance was analyzed by the time-domain simulation method. After exhaustive simulations,the effect of air pressure induced by different working conditions on the shock response of a supercharged boiler was reviewed,leading to conclusions about the variability of structural response with different loading parameters. In order to simulate the real impulsive environments of supercharged boilers,the integration of equipment and ship structure was then primarily used to analyze shock response. These distinctly different equipment shock test methods,run under equivalent work conditions,were compared and the causes of discrepancy were analyzed. The main purpose of this paper is to present references for the anti-shock design of marine supercharged boilers. 相似文献