An algorithm for the combined distribution and assignment problem

Much interest has recently been shown in the combination of the distribution and assignment models. In this paper we adopt a generalized Benders' decomposition to solve this combined problem for a system optimized assignment with linear link costs and explicit capacity constraints on link flows. The master problem which is generated is used to show that the combined problem can be viewed as a modified distribution problem, of gravity form, with a minimax instead of a linear objective function. An algorithm for solving the master problem is discussed, and some computational results presented.     

Algorithms for logit-based stochastic user equilibrium assignment

The paper proposes an efficient algorithm for determining the stochastic user equilibrium solution for logit-based loading. The commonly used Method of Successive Averages typically has a very slow convergence rate. The new algorithm described here uses Williams’ result [ Williams, (1977) On the formation of travel demand models and economic evaluation measures of user benefit. Environment and Planning 9A(3), 285–344] which enables the expected value of the perceived travel costs S_rs to be readily calculated for any flow vector x. This enables the value of the Sheffi and Powell, 1982 objective function [Sheffi, Y. and Powell, W. B. (1982) An algorithm for the equilibrium assignment problem with random link times. Networks 12(2), 191–207], and its gradient in any specified search direction, to be calculated. It is then shown how, at each iteration, an optimal step length along the search direction can be easily estimated, rather than using the pre-set step lengths, thus giving much faster convergence. The basic algorithm uses the standard search direction (towards the auxiliary solution). In addition the performance of two further versions of the algorithm are investigated, both of which use an optimal step length but alternative search directions, based on the Davidon–Fletcher–Powell function minimisation method. The first is an unconstrained and the second a constrained version. Comparisons are made of all three versions of the algorithm, using a number of test networks ranging from a simple three-link network to one with almost 3000 links. It is found that for all but the smallest network the version using the standard search direction gives the fastest rate of convergence. Extensions to allow for multiple user classes and elastic demand are also possible.     

General stochastic user equilibrium traffic assignment problem with link capacity constraints

This paper addresses a general stochastic user equilibrium (SUE) traffic assignment problem with link capacity constraints. It first proposes a novel linearly constrained minimization model in terms of path flows and then shows that any of its local minimums satisfies the generalized SUE conditions. As the objective function of the proposed model involves path‐specific delay functions without explicit mathematical expressions, its Lagrangian dual formulation is analyzed. On the basis of the Lagrangian dual model, a convergent Lagrangian dual method with a predetermined step size sequence is developed. This solution method merely invokes a subroutine at each iteration to perform a conventional SUE traffic assignment excluding link capacity constraints. Finally, two numerical examples are used to illustrate the proposed model and solution method.     

Interactions between driver information,route choice,and optimal signal timing on a simple network

The interaction between driver information, route choice, and optimal traffic signal settings was investigated using a simple two-route system with a single “T” intersection and a fixed O-D demand. The logit model and the method of successive averages (MSA) were used to calculate the route choice probabilities and the stochastic equilibrium assignment. Given an assignment, signal settings which minimized average intersection delay were calculated; flow reassignment and new optimal signal settings were then obtained and this iterative process continued until convergence. The calculations were performed either directly in a combined assignment/signal optimization model or in stages using the output flows of an assignment model as inputs to TRANSYT-7F and iterating between the two models. Results show that a unique joint signal timing/assignment equilibrium is reached in all cases provided that a certain precision in drivers' perceptions is not reached. If driver information increases to this precision (bifurcation point) and beyond, results show clearly that the unique joint signal timing/assignment equilibrium no longer exists. In fact, three joint equilibria points exist after the bifurcation point. Two of these points are stable and one is not. It was found that the system yields the lowest total intersection delay when the joint equilibrium is such that all traffic and hence the major part of green time is assigned to only one of the two routes. Although this may not be feasible to implement in practice, the results indicate clearly for this simple example that there is a trade-off between a system with minimum total delay but no unique joint signal-settings/assignment equilibrium (achieved when drivers have nearly perfect information about the system) and a system with a unique joint equilibrium but with higher total delay (achieved when drivers have reasonably good but somewhat limited information). In most cases the second system seems appropriate for a number of practical reasons.     

Formulating and solving the network design problem by decomposition

The optimal transportation network design problem is formulated as a convex nonlinear programming problem and a solution method based on standard traffic assignment algorithms is presented. The technique can deal with network improvements which introduce new links, which increase the capacity of existing links, or which decrease the free-flow (uncongested) travel time on existing links (with or without simultaneously increasing link capacity). Preliminary computational experience with the method demonstrates that it is capable of solving very large problems with reasonable amounts of computer time.     

Comparing whole-link travel time models

In a model commonly used in dynamic traffic assignment the link travel time for a vehicle entering a link at time t is taken as a function of the number of vehicles on the link at time t. In an alternative recently introduced model, the travel time for a vehicle entering a link at time t is taken as a function of an estimate of the flow in the immediate neighbourhood of the vehicle, averaged over the time the vehicle is traversing the link. Here we compare the solutions obtained from these two models when applied to various inflow profiles. We also divide the link into segments, apply each model sequentially to the segments and again compare the results. As the number of segments is increased, the discretisation refined to the continuous limit, the solutions from the two models converge to the same solution, which is the solution of the Lighthill, Whitham, Richards (LWR) model for traffic flow. We illustrate the results for different travel time functions and patterns of inflows to the link. In the numerical examples the solutions from the second of the two models are closer to the limit solutions. We also show that the models converge even when the link segments are not homogeneous, and introduce a correction scheme in the second model to compensate for an approximation error, hence improving the approximation to the LWR model.     

Link capacity functions: A review

This paper reviews the state-of-the-art of the measurement and formulation of link capacity functions, or volume-delay curves, for use in traffic assignment procedures. The effect of the position of measuring vehicular flow and the length of sampling interval used is investigated qualitatively, and some practical recommendations are made. The “capacity” of a link is investigated, and it is concluded that capacity under “steady-state” conditions is the most appropriate measure. Some proposed link capacity functions are reviewed with respect to their proven ability to represent observed data, and their applicability in traffic assignment procedures.     

On the variance of recurrent traffic flow for statistical traffic assignment

This paper generalizes and extends classical traffic assignment models to characterize the statistical features of Origin-Destination (O-D) demands, link/path flow and link/path costs, all of which vary from day to day. The generalized statistical traffic assignment (GESTA) model has a clear multi-level variance structure. Flow variance is analytically decomposed into three sources, O-D demands, route choices and measurement errors. Consequently, optimal decisions on roadway design, maintenance, operations and planning can be made using estimated probability distributions of link/path flow and system performance. The statistical equilibrium in GESTA is mathematically defined. Its multi-level statistical structure well fits large-scale data mining techniques. The embedded route choice model is consistent with the settings of O-D demands considering link costs that vary from day to day. We propose a Method of Successive Averages (MSA) based solution algorithm to solve for GESTA. Its convergence and computational complexity are analyzed. Three example networks including a large-scale network are solved to provide insights for decision making and to demonstrate computational efficiency.     

The convergence of diagonalization algorithms for asymmetric network equilibrium problems

We provide a sufficient condition for the convergence of diagonalization algorithms for equilibrium traffic assignment problems with asymmetric Jacobian matrix B(v) of the link user cost mapping s(v) of the flow v. When

Full-size image

, where D(v^*) > 0 is the diagonal of B(v^*) and v^* is the equilibrium flow, we demonstrate a local convergence theorem for nonlinear cost functions. The implication of this result for practical applications of the model are outlined.     

The dynamics of traffic assignment and traffic control: A theoretical study

The paper considers traffic assignment, with traffic controls, in an increasingly dynamic way. First, a natural way of introducing the responsive policy, P_o, into steady state traffic assignment is presented. Then it is shown that natural stability results follow within a dynamical version of this static equilibrium model (still with a constant demand). We are able to obtain similar stability results when queues are explicitly allowed for, provided demand is constant. Finally we allow demand to vary with time; we consider the dynamic assignment problem with signal-settings now fixed. Here we assume that vehicles are very short and that deterministic queueing theory applies, and show that the time-dependent queueing delay at the bottleneck at the end of a link is a monotone function of the time-dependent input profile to the bottleneck. We have been unable to obtain results when dynamic demand and responsive signal control are combined.     

The treatment of uncertainty in the dynamic origin–destination estimation problem using a fuzzy approach

Regardless of existing types of transportation and traffic model and their applications, the essential input to these models is travel demand, which is usually described using origin–destination (OD) matrices. Due to the high cost and time required for the direct development of such matrices, they are sometimes estimated indirectly from traffic measurements recorded from the transportation network. Based on an assumed demand profile, OD estimation problems can be categorized into static or dynamic groups. Dynamic OD demand provides valuable information on the within-day fluctuation of traffic, which can be employed to analyse congestion dissipation. In addition, OD estimates are essential inputs to dynamic traffic assignment (DTA) models. This study presents a fuzzy approach to dynamic OD estimation problems. The problems are approached using a two-level model in which demand is estimated in the upper level and the lower level performs DTA via traffic simulation. Using fuzzy rules and the fuzzy C-Mean clustering approach, the proposed method treats uncertainty in historical OD demand and observed link counts. The approach employs expert knowledge to model fitted link counts and to set boundaries for the optimization problem by defining functions in the fuzzification process. The same operation is performed on the simulation outputs, and the entire process enables different types of optimization algorithm to be employed. The Box-complex method is utilized as an optimization algorithm in the implementation of the approach. Empirical case studies are performed on two networks to evaluate the validity and accuracy of the approach. The study results for a synthetic network and a real network demonstrate the robust performance of the proposed method even when using low-quality historical demand data.     

An augmented Lagrangian origin‐based algorithm for link‐capacitated traffic assignment problem

The origin‐based algorithm is embedded into the augmented Lagrangian method for the link‐capacitated traffic assignment problem. In order to solve the “nonexistence” problem due to the second partial derivatives of the augmented Lagrangian function at some specific points, the approximate expressions of the second partial derivatives are amended in the origin‐based algorithm. The graph of last common nodes is developed on the basis of the restricted single‐origin network. A method is proposed for finding n–1 last common nodes of the restricted single‐origin network, resulting in computational complexity of O(n²) in finding last common nodes. Numerical analysis on the Sioux Falls network and Chicago Sketch network demonstrated the effectiveness and characteristics of the proposed algorithm. Copyright © 2014 John Wiley & Sons, Ltd.     

A specialized equilibrium assignment algorithm for air quality modeling

A multiple user class equilibrium assignment algorithm is formulated to determine vehicle trips and the vehicle miles of travel (VMT) in various operating modes on highway links. A heuristic solution algorithm based on the Frank–Wolfe decomposition of the equilibrium assignment problem is presented. The treatment of intrazonal trips, which are very important for emission studies is also discussed. The solution algorithm is implemented in a traffic assignment program for emission studies, referred to as TAPES. The use of the algorithm is demonstrated through a TAPES model case study on a Charlotte, NC network database for 1990 AM peak period. The operating mode mix of VMT in cold transient, hot transient and hot stabilized modes, also known as the mix of cold-starts, hot-starts and stabilized mode trips, is derived on a link by link basis. The results are aggregated by facility type and the location of link segments. It is observed that the operating mode fractions in transient and stabilized modes could vary widely across different facility types geographic locations. The aggregated operating mode fractions derived from the assignment analysis indicates that a lesser proportion of VMT operates in cold and hot transient modes when compared to the operating mode mix derived from the Federal Test Procedure (FTP).     

Solving the gate assignment problem through the Fuzzy Bee Colony Optimization

In the field of Swarm Intelligence, the Bee Colony Optimization (BCO) has proven to be capable of solving high-level combinatorial problems, like the Flight-Gate Assignment Problem (FGAP), with fast convergence performances. However, given that the FGAP can be often affected by uncertainty or approximation in data, in this paper we develop a new metaheuristic algorithm, based on the Fuzzy Bee Colony Optimization (FBCO), which integrates the concepts of BCO with a Fuzzy Inference System. The proposed method assigns, through the multicriteria analysis, airport gates to scheduled flights based on both passengers’ total walking distance and use of remote gates, to find an optimal flight-to-gate assignment for a given schedule. Comparison of the results with the schedules of real airports has allowed us to show the characteristics of the proposed concepts and, at the same time, it stressed the effectiveness of the proposed method.     

A model and solution algorithm for dynamic deterministic user equilibrium assignment

Abstract

In this paper a route-based dynamic deterministic user equilibrium assignment model is presented. Some features of the linear travel time model are first investigated and then a divided linear travel time model is proposed for the estimation of link travel time: it addresses the limitations of the linear travel time model. For the application of the proposed model to general transportation networks, this paper provides thorough investigations on the computational issues in dynamic traffic assignment with many-to-many OD pairs and presents an efficient solution procedure. The numerical calculations demonstrate that the proposed model and solution algorithm produce satisfactory solutions for a network of substantial size with many-to-many OD pairs. Comparisons of assignment results are also made to show the impacts of incorporation of different link travel time models on the assignment results.     

Approximate network loading and dual-time-scale dynamic user equilibrium

In this paper we present a dual-time-scale formulation of dynamic user equilibrium (DUE) with demand evolution. Our formulation belongs to the problem class that Pang and Stewart (2008) refer to as differential variational inequalities. It combines the within-day time scale for which route and departure time choices fluctuate in continuous time with the day-to-day time scale for which demand evolves in discrete time steps. Our formulation is consistent with the often told story that drivers adjust their travel demands at the end of every day based on their congestion experience during one or more previous days. We show that analysis of the within-day assignment model is tremendously simplified by expressing dynamic user equilibrium as a differential variational inequality. We also show there is a class of day-to-day demand growth models that allow the dual-time-scale formulation to be decomposed by time-stepping to yield a sequence of continuous time, single-day, dynamic user equilibrium problems. To solve the single-day DUE problems arising during time-stepping, it is necessary to repeatedly solve a dynamic network loading problem. We observe that the network loading phase of DUE computation generally constitutes a differential algebraic equation (DAE) system, and we show that the DAE system for network loading based on the link delay model (LDM) of Friesz et al. (1993) may be approximated by a system of ordinary differential equations (ODEs). That system of ODEs, as we demonstrate, may be efficiently solved using traditional numerical methods for such problems. To compute an actual dynamic user equilibrium, we introduce a continuous time fixed-point algorithm and prove its convergence for effective path delay operators that allow a limited type of nonmonotone path delay. We show that our DUE algorithm is compatible with network loading based on the LDM and the cell transmission model (CTM) due to Daganzo (1995). We provide a numerical example based on the much studied Sioux Falls network.     

A comparison of stochastic and deterministic traffic assignment over congested networks

The similarity between link flows obtained from deterministic and stochastic equilibrium traffic assignment models is investigated at different levels of congestion. A probit-based stochastic assignment is used (over a congested network) where the conditions for equilibrium are those given by Daganzo and Sheffi (1977). Stochastic equilibrium flows are generated using an iterative procedure with predetermined step sizes, and the resulting assignment is validated on the basis of the equilibrium criteria. The procedure is intended to assist in the choice of the most appropriate assignment algorithm for a given level of congestion.     

A new fuzzy approach to estimate the O–D matrix from link volumes

Abstract

Estimation of the origin–destination (O–D) trip demand matrix plays a key role in travel analysis and transportation planning and operations. Many researchers have developed different O–D matrix estimation methods using traffic counts, which allow simple data collection as opposed to the costly traditional direct estimation methods based on home and roadside interviews.

In this paper, we present a new fuzzy model to estimate the O–D matrix from traffic counts. Since link data only represent a snapshot situation, resulting in inconsistency of data and poor quality of the estimated O–Ds, the proposed method considers the link data as a fuzzy number that varies within a certain bandwidth. Shafahi and Ramezani's fuzzy assignment method is improved upon and used to assign the estimated O–D matrix, which causes the assigned volumes to be fuzzy numbers similar to what is proposed for observed link counts. The shortest path algorithm of the proposed method is similar to the Floyd–Warshall algorithm, and we call it the Fuzzy Floyd–Warshall Algorithm. A new fuzzy comparing index is proposed by improving the fuzzy comparison method developed by Dubois and Prade to estimate and compare the distance between the assigned and observed link volumes. The O–D estimation model is formulated as a convex minimization problem based on the proposed fuzzy index to minimize the fuzzy distance between the observed and assigned link volumes. A gradient-based method is used to solve the problem. To ensure the original O–D matrix does not change more than necessary during the iterations, a fuzzy rule-based approach is proposed to control the matrix changes.     

Quasi-dynamic traffic assignment with residual point queues incorporating a first order node model

Static traffic assignment models are still widely applied for strategic transport planning purposes in spite of the fact that such models produce implausible traffic flows that exceed link capacities and predict incorrect congestion locations. There have been numerous attempts to constrain link flows to capacity. Capacity constrained models with residual queues are often referred to as quasi-dynamic traffic assignment models. After reviewing the literature, we come to the conclusion that an important piece of the puzzle has been missing so far, namely the inclusion of a first order node model. In this paper we propose a novel path-based static traffic assignment model for finding a stochastic user equilibrium in general transportation networks. This model includes a first order (steady-state) node model that yields more realistic turn capacities, which are then used to determine consistent capacity constrained traffic flows, residual point (vertical) queues (upstream bottleneck links), and path travel times consistent with queuing theory. The route choice part of the model is specified as a variational inequality problem, while the network loading part is formulated as a fixed point problem. Both problems are solved using existing techniques to find a solution. We illustrate the model using hypothetical examples, and also demonstrate feasibility on large-scale networks.     

Berth assignment planning for multi‐line bus stops

In this paper, we study an important problem that arises with the fast development of public transportation systems: when a large number of bus lines share the same bus stop, a long queue of buses often forms when they wait to get into the stop in rush hours. This causes a significant increase of bus delay and a notable drop of traffic capacity near the bus stop. Various measures had been proposed to relieve the congestions near bus stops. However, all of them require considerable financial budgets and construction time costs. In this paper, with the concept of berth assignment redesign, a simulation‐based heuristic algorithm is proposed to make full use of exiting bus berths. In this study, a trustable simulation platform is designed, and the major influencing factors for bus stop operations are considered. The concept of risk control is also introduced to better evaluate the performance of different berth arrangement plans and makes an appropriate trade‐off between the system's efficiency and stability. Finally, a heuristic algorithm is proposed to find a sub‐optimal berth assignment plan. Tests on a typical bus stop show that this algorithm is efficient and fast. The sub‐optimal berth assignment plan obtained by this algorithm could make remarkable improvements to an actual bus stop. Copyright © 2013 John Wiley & Sons, Ltd.