Nonlinear Dynamics of Vehicle Traction

Summary The purpose of this study is to understand the nonlinear dynamics of longitudinal ground vehicle traction. Specifically, single-wheel models of rubber-tired automobiles under straight-ahead braking and acceleration conditions are investigated in detail. Customarily, the forward vehicle speed and the rotational rate of the tire/wheel are taken as dynamic states. This paper motivates an alternative formulation in which wheel slip, a dimensionless measure of the difference between the vehicle speed and the circumferential speed of the tire relative to the wheel center, replaces the angular velocity of the tire/wheel as a dynamic state. This formulation offers new insight into the dynamic behavior of vehicle traction. The unique features of the modeling approach allow one to capture the full range of dynamic responses of the single-wheel traction models in a relatively simple geometric manner. The models developed here may also be useful for developing and implementing anti-lock brake and traction control control schemes.     

用于公路车-桥系统振动分析的精细化轮胎模型

为了解决当前公路车桥耦合振动模型中轮胎模型过于简化、车轮-路面接触力与桥梁响应计算结果不够精确的问题,提出了一种精细化轮胎模型.首先基于车辆橡胶轮胎的几何、力学特征,建立了径向弹簧力学模型并进行了理论推导;然后考虑轮胎与路面接触面的刚度分布特征和高速状况下轮胎的惯性力,提出了轮胎接触面分布刚度的计算方法,保证了轮胎接触...     

牵引力控制系统模糊PI控制方法研究

提出牵引力控制系统的油门模糊增量PI控制算法和驱动轮制动模糊PI控制算法。在建立汽车加速过程的发动机模型、制动器模型、轮胎模型、整车模型和路面自动识别系统的基础上，采用所提出的控制算法对典型附着路面上的牵引力控制过程进行了仿真模拟。结果表明路面自动识别系统能识别路面附着变化，有效抑制各种工况的驱动轮过度滑转，有较强的鲁棒性。     

Longitudinal Tire Dynamics

This article begins with a brief review of the traditional concept of lateral relaxation length. The review illustrates that this concept yields a useful approximation which can be used with semi-empirical tire models which assume lateral forces are a function of steady-state slip angles. The article then presents an analogous derivation for longitudinal slip. Like its lateral counterpart, the derivation yields an approximation for transient longitudinal slip which can be used with tire models which assume longitudinal forces are a function of steady-state longitudinal slip. It is shown that, like the relaxation-length-based lateral slip angle, this formulation for longitudinal slip yields the ability to compute shear forces at the tire/road interface for either high or low speed applications, a necessary feature of simulations which support human in the loop driving simulation. Like traditional kinematically-based longitudinal slip, the transient formulation presented here is coupled with the wheel spin equation, and it shares the characteristic that it is very stiff compared to the equations of vehicle motion. This characteristic is a challenge impeding the real-time calculations required for driving simulation. The paper shows that local linearization of the wheel spin equations coupled with analytical solutions of the transient longitudinal slip formulation provide the basis for both insight into the longitudinal dynamics of the tire and for integrating the model in real-time.     

Longitudinal Tire Dynamics

SUMMARY

This article begins with a brief review of the traditional concept of lateral relaxation length. The review illustrates that this concept yields a useful approximation which can be used with semi-empirical tire models which assume lateral forces are a function of steady-state slip angles. The article then presents an analogous derivation for longitudinal slip. Like its lateral counterpart, the derivation yields an approximation for transient longitudinal slip which can be used with tire models which assume longitudinal forces are a function of steady-state longitudinal slip. It is shown that, like the relaxation-length-based lateral slip angle, this formulation for longitudinal slip yields the ability to compute shear forces at the tire/road interface for either high or low speed applications, a necessary feature of simulations which support human in the loop driving simulation. Like traditional kinematically-based longitudinal slip, the transient formulation presented here is coupled with the wheel spin equation, and it shares the characteristic that it is very stiff compared to the equations of vehicle motion. This characteristic is a challenge impeding the real-time calculations required for driving simulation. The paper shows that local linearization of the wheel spin equations coupled with analytical solutions of the transient longitudinal slip formulation provide the basis for both insight into the longitudinal dynamics of the tire and for integrating the model in real-time.     

Literature review and fundamental approaches for vehicle and tire state estimation*

ABSTRACT

Most modern day automotive chassis control systems employ a feedback control structure. Therefore, real-time estimates of the vehicle dynamic states and tire-road contact parameters are invaluable for enhancing the performance of vehicle control systems, such as anti-lock brake system (ABS) and electronic stability program (ESP). Today's production vehicles are equipped with onboard sensors (e.g. a 3-axis accelerometer, 3-axis gyroscope, steering wheel angle sensor, and wheel speed sensors), which when used in conjunction with certain model-based or kinematics-based observers can be used to identify relevant tire and vehicle states for optimal control of comfort, stability and handling. Vehicle state estimation is becoming ever more relevant with the increased sophistication of chassis control systems. This paper presents a comprehensive overview of the state-of-the-art in the field of vehicle and tire state estimation. It is expected to serve as a resource for researchers interested in developing vehicle state estimation algorithms for usage in advanced vehicle control and safety systems.     

Analytical Wheel Models for Ride Dynamic Simulation of Off-road Tracked Vehicles

This paper outlines various analytical approaches of varying complexities to model the wheel in the ride dynamic formulation of off-road tracked vehicles. In addition to a proposed model, four analytical models available in the literature are compared to study their effectiveness in modeling the wheel/track-terrain interaction for ride dynamic evaluation of typical high mobility tracked vehicles. The ride dynamic model used in this study describes the bounce-pitch plane motion of an armoured personnel carrier (Ml 13 APC) traversing over an arbitrary rigid terrain profile at constant speed. The ride dynamic response of the tracked vehicle is evaluated with different wheel models, and compared against field-measured ride data. The relative performance of different wheel models are assessed based on the accuracy of response prediction and associated computational time. The proposed wheel model is found to perform very well in comparison, and is equally applicable for the case of wheeled vehicles.     

Design of a signal transducer for direct conversion of wheel linear accelerations into tire lateral forces

This paper describes a design of a real-time conversion system of wheel linear accelerations into tire lateral forces. Though the tire lateral forces are important elements for analyzing vehicle dynamic control performances, they cannot be easily measured in real-time owing to the non-linearities of tire dynamics, friction, and slippage on road. In this paper, we propose a practical direct method using wheel linear accelerations in order to estimate tire lateral forces transmitted into the vehicle in real-time. A simplified vehicle model based on force-acceleration analysis is proposed to assure the real-time performance. The acceleration values are obtained using three-axis accelerometers attached on each wheel location. For conditioning and rectifying the acceleration signals, a signal transducer is designed using a digital filter. And in order to investigate the feasibility and real-time performance, a prototype of signal transducer is fabricated using a digital signal processor. The experimental results and performance are validated with the road test results using six-component wheel force transducers.     

A Versatile Flat Track Tire Testing Machine

Summary A flat track tire testing machine developed by the IMMa group is described. It permits the simulation and study of the dynamic behavior of a great variety of tires under controllable and repetitive highly dynamic realistic working conditions in the laboratory for a diversity of vehicles, from motorcycles to light trucks. The machine incorporates: – a hydraulically operated tire support and loading system with wide operating ranges; – a computer controlled brake system to simulate braking maneuvers with ABS systems; – a complete sensorial system; – a data acquisition and control system continually monitoring and acting on the experimental variables, i.e., tire and belt speed, longitudinal slip, slip and camber angles, tire pressure, tire normal force, etc. As an application example, results are presented that adjust the parameter of the magic formula for a standard 175/70 R14 passenger vehicle tire. Accurate mathematical tire models are recognized as essential for the prediction of vehicle dynamic performances using simulation tools.     

A Versatile Flat Track Tire Testing Machine

Summary A flat track tire testing machine developed by the IMMa group is described. It permits the simulation and study of the dynamic behavior of a great variety of tires under controllable and repetitive highly dynamic realistic working conditions in the laboratory for a diversity of vehicles, from motorcycles to light trucks. The machine incorporates: - a hydraulically operated tire support and loading system with wide operating ranges; - a computer controlled brake system to simulate braking maneuvers with ABS systems; - a complete sensorial system; - a data acquisition and control system continually monitoring and acting on the experimental variables, i.e., tire and belt speed, longitudinal slip, slip and camber angles, tire pressure, tire normal force, etc. As an application example, results are presented that adjust the parameter of the magic formula for a standard 175/70 R14 passenger vehicle tire. Accurate mathematical tire models are recognized as essential for the prediction of vehicle dynamic performances using simulation tools.     

Modeling and Analysis of Automotive Antilock Brake Systems Subject to Vehicle Payload Shifting

The steerability and stability of vehicles must be maintained during emergency stopping and evasive driving maneuvers on degraded road surfaces. The introduction of antilock brake and traction control systems (ABS/TCS) has expanded the envelope of safe vehicle operation for the majority of drivers. These mechatronic systems combine an electronic controller with wheel speed sensors, an electro-mechanical hydraulic brake actuator, and in some instances, engine intervention through the engine control unit, to regulate wheel slip. The development of ABS systems has traditionally depended on extensive in-vehicle testing, at cold weather proving grounds, which contribute to lengthy product development cycles. However, recent attention has been focused on the use of simulation and hardware-in-the-loop strategies to emulate test conditions in a controlled setting to shorten product design time and methodically address critical safety issues. In this paper, the effect of transient load shifting due to cargo movement on ABS performance in light-duty vehicles will be investigated. Analytical and empirical mathematical models are presented to describe the chassis, tire/road interface, wheel, brake modulator, and cargo dynamics. Two strategies, a model-free table lookup and model-based discrete nonlinear controller, are presented to regulate the ABS modulator's operation. These vehicle and controller dynamics have been integrated into a simulation tool to investigate the effect of transient weight transfers on the vehicle's overall stopping distance and time. Representative numerical results are presented and discussed to quantify the ABS systems' performance for various loading and operating conditions.     

Vehicle modeling with nonlinear tires for vehicle stability analysis

The dynamic stability of a vehicle depends on various maneuvering features, such as traction, braking, and cornering. This study presents nonlinear vehicle models for estimating the stability region and simulating the dynamic behavior of a vehicle. Two types of vehicle models were found by considering the degrees of freedom and linearity. A simple model with nonlinear tire dynamics is useful for determining the stability region, while a complex model (a multi-body dynamic model in MSC.ADAMS) is appropriate for carrying out accurate simulations. Actual data for a mid-sized passenger car were used, and the models were validated by comparison with test results.     

Wheel Vibrations and Transient Tire Forces

This paper presents a survey of the state-of-the-art in predicting the wheel vibrations in a complex dynamic vehicle suspension system and their influence on the forces transduced in a high frequency area from the tire to the vehicle's body. Secondly it presents also the transient evolution of tire models used for prediction and understanding high frequency movements in the tire's contact area, producing the guiding forces and torques during vehicle handling.     

沙漠车在塔克拉玛干沙漠牵引通过性能的试验研究

设计制造了一套沙漠车模引的电测试验装置，对浙江省车在塔克拉玛干沙漠中行驶时的驱动桥扭矩，挂钩力，动裁，车速，车轮轮速等参数进行了现场测量，得出了沙漠车在不同轮胎气压下的牵引系数，牵引效率和动阻力系试验结果对沙性性能的评价和改进具有指导意义。     

Fuzzy Logic Traction Controllers and their Effect on Longitudinal Vehicle Platoon Systems

This paper presents two fuzzy logic traction controllers and investigates their effect on longitudinal platoon systems. A fuzzy logic approach is appealing for traction control because of the nonlinearity and time-varying uncertainty involved in traction control systems

The fuzzy logic traction controllers we present regulate brake torque to control wheel slip, which is the normalized difference between wheel and vehicle speed. One fuzzy controller estimates the peak slip corresponding to the maximum tire-road adhesion coefficient and regulates wheel slip at the peak slip. The controller is attractive because of its ability to maximize acceleration and deceleration regardless of road condition. However, we find through simulations the controller's performance degrades in the presence of time-varying uncertainties. The other fuzzy logic controller regulates wheel slip at any desired value. Through simulations we find the controller robust against changing road conditions and uncertainties. The target slip is predetermined and not necessarily the peak slip for all road conditions. If the target slip is set low, stable acceleration and deceleration is guaranteed, regardless of road condition

We also study the effect of traction control on longitudinal vehicle platoon systems using simulations. The simulations include acceleration and deceleration maneuvers on an icy road. The results indicate traction control may substantially improve longitudinal platoon performance, especially when icy road conditions exist.     

A survey of wheel–rail contact models for rail vehicles

Accurate and efficient contact models for wheel–rail interaction are essential for the study of the dynamic behaviour of a railway vehicle. Assessment of the contact forces and moments, as well as contact geometry provide a fundamental foundation for such tasks as design of braking and traction control systems, prediction of wheel and rail wear, and evaluation of ride safety and comfort. This paper discusses the evolution and the current state of the theories for solving the wheel–rail contact problem for rolling stock. The well-known theories for modelling both normal contact (Hertzian and non-Hertzian) and tangential contact (Kalker's linear theory, FASTSIM, CONTACT, Polach's theory, etc.) are reviewed. The paper discusses the simplifying assumptions for developing these models and compares their functionality. The experimental studies for evaluation of contact models are also reviewed. This paper concludes with discussing open areas in contact mechanics that require further research for developing better models to represent the wheel–rail interaction.     

Model-Based Road Friction Estimation

The tire/road friction coefficient, μ, has a significant role in vehicle longitudinal and lateral control, and there has been associated efforts to measure or estimate the road surface condition to provide additional information for stability augmentation systems of automobiles. In this paper, a model based road friction estimation algorithm is proposed from easily measured signals such as yaw rate and wheel speed. For the development of the estimator, a low order vehicle model incorporated with simple but effective tire model. Field tests of the estimator using actual vehicle measurements show promising results.     

Wheel Vibrations and Transient Tire Forces

SUMMARY

This paper presents a survey of the state-of-the-art in predicting the wheel vibrations in a complex dynamic vehicle suspension system and their influence on the forces transduced in a high frequency area from the tire to the vehicle's body. Secondly it presents also the transient evolution of tire models used for prediction and understanding high frequency movements in the tire's contact area, producing the guiding forces and torques during vehicle handling.     

轮胎附着极限下差动制动对汽车横摆力矩的影响

本文以纵滑－侧偏联合工况的稳态轮胎模型为基础，分析了汽车极限转向条件下制动作用于不同车轮时对汽车横摆力矩的影响，并通过整车动力学仿真进行了验证，研究结果为利用差动制动控制提高汽车的高速操纵稳定性提供了动力学依据。     

Drive control system design for stability and maneuverability of a 6WD/6WS vehicle

This paper describes a drive controller designed to improve the lateral vehicle stability and maneuverability of a 6-wheel drive / 6-wheel steering (6WD/6WS) vehicle. The drive controller consists of upper and lower level controllers. The upper level controller is based on sliding control theory and determines both front and middle steering angle, additional net yaw moment, and longitudinal net force according to the reference velocity and steering angle of a manual drive, remotely controlled, autonomous controller. The lower level controller takes the desired longitudinal net force, yaw moment, and tire force information as inputs and determines the additional front steering angle and distributed longitudinal tire force on each wheel. This controller is based on optimal distribution control and takes into consideration the friction circle related to the vertical tire force and friction coefficient acting on the road and tire. Distributed longitudinal/lateral tire forces are determined as proportion to the size of the friction circle according to changes in driving conditions. The response of the 6WD/6WS vehicle implemented with this drive controller has been evaluated via computer simulations conducted using the Matlab/Simulink dynamic model. Computer simulations of an open loop under turning conditions and a closed-loop driver model subjected to double lane change have been conducted to demonstrate the improved performance of the proposed drive controller over that of a conventional DYC.