An Emergency Obstacle Avoidance Control Strategy for Automated Highway Vehicles

Summary This paper presents an emergency obstacle avoidance control strategy that may be used in automated highway vehicles. In the proposed control strategy, an inverse vehicle dynamics problem is solved on the selected emergency lane-change path to find out the nominal feedforward control inputs such as the steering wheel angle and the braking force. Then the overall vehicle lateral and yaw motion is controlled additionally in the feedback path by an active yaw moment for stability augmentation as well as a corrective steering angle that is added to the nominal steering angle in order to compensate for uncertainties involved in the nominal control input computation. The proposed control strategy has been tested by an ABS Hardware-In-the-Loop Simulation (HILS) system for rapid and safe control prototyping in a lab. Simulation results with a sample emergency avoidance distance (45 m) show that the proposed control strategy may be used as a feasible obstacle avoidance strategy for automated highway vehicles.     

Vehicle stability control based on driver’s emergency alignment intention recognition

In this work, the reference model modification strategy for vehicle stability control based on driver's intention recognition under emergent obstacle avoidance situation was proposed. First the conflicts between the driver's emergency alignment (EA) intention and vehicle response characteristics were analyzed in critical emergent obstacle avoidance situation. Second combining steering wheel angle and its speed, the driver's EA intention was recognized. The reference model modification strategy based on steering operation index (SOI) was presented. Then a LQR model following controller with tire cornering stiffness adaption was used to generate direct yaw moment for tracking modified reference yaw rate and reference sideslip angle. Finally based on the four-in-wheel-motor-drive (FIWMD) electric vehicles (EV), double lane change and slalom tests were conducted to compare the results using modified reference model with the results using normal reference model. The experimental tests have proved the effectiveness of the reference model modification strategy based on driver's intention recognition.     

智能汽车自动紧急转向避撞的跟踪控制方法对比研究

为了提高智能汽车的主动安全性,提出3种不同的自动紧急转向避撞跟踪控制方法。首先建立汽车避撞简化模型,对制动、转向及两者相结合的3种不同避撞方式进行对比分析。其次,为深入研究汽车避撞过程中的实际响应,建立包含转向、制动及悬架3个子系统耦合特性的底盘18自由度统一动力学模型,并进行相关试验验证。随后构建智能汽车自动紧急转向避撞控制框架,对五次多项式参考路径和七次多项式参考路径的横摆角速度和横摆角加速度进行对比分析。接着以线性2自由度转向动力学模型为参考对象,对最优控制四轮转向、最优控制前轮转向、前馈与反馈控制相结合的前轮转向3种不同的跟踪控制系统分别进行设计。最后,以汽车底盘18自由度统一动力学模型为研究对象,对上述3种避撞控制系统进行仿真试验对比分析。研究结果表明：与制动避撞相比而言,转向避撞所需的纵向距离有较大降低,随着车速的增加和路面附着系数的越低,效果越明显;七次多项式参考路径比五次多项式参考路径的避撞过渡过程更为平缓,当实际车速与控制器所用车速不一致时,前者避撞性能表现更优;最优四轮转向控制系统在高、低2种不同附着路面都具有较好的避撞效果,最优前轮转向控制系统次之,而前馈与反馈相结合的前轮转向控制系统在低附着路面上则表现出严重的失稳。     

Comprehensive lateral driver model for critical maneuvering conditions

A new comprehensive driver model is presented for critical maneuvering conditions with more accurate dynamic control performance. In order to achieve a safe maneuvering mode, a new path planning scheme to maintain stability of the vehicle was designed. A new steering strategy, considering the errors of vehicle position and yaw angle between the real track and the planned path, was established to obtain the steering angle. Therefore, the vehicle can be adjusted to accurately follow the desired path with the driver model, and the stability of the vehicle and the smoothness of the steering angle input were comprehensively considered. Simulation results were used to validate the control performance in comparison with the optimal preview driver model proposed by Macadam.     

装载机避障轨迹规划及模型预测轨迹跟踪

轮式装载机在工作区域行驶时,避障过程频繁,以往的避障轨迹规划未考虑整车转向半径约束和车速变化,也较少考虑整车在动力学模型条件下的轨迹跟踪性能.针对上述情况,以自动驾驶轮式装载机为对象,基于最优快速随机扩展树算法(RRT*),考虑车身膨胀圆个数,生成全局最优避障路径,以整车最小稳定转向半径为约束,利用CC-Steer算法...     

Lateral handling improvement with dynamic curvature control for an independent rear wheel drive EV

The integrated longitudinal and lateral dynamic motion control is important for four wheel independent drive (4WID) electric vehicles. Under critical driving conditions, direct yaw moment control (DYC) has been proved as effective for vehicle handling stability and maneuverability by implementing optimized torque distribution of each wheel, especially with independent wheel drive electric vehicles. The intended vehicle path upon driver steering input is heavily depending on the instantaneous vehicle speed, body side slip and yaw rate of a vehicle, which can directly affect the steering effort of driver. In this paper, we propose a dynamic curvature controller (DCC) by applying a the dynamic curvature of the path, derived from vehicle dynamic state variables; yaw rate, side slip angle, and speed of a vehicle. The proposed controller, combined with DYC and wheel longitudinal slip control, is to utilize the dynamic curvature as a target control parameter for a feedback, avoiding estimating the vehicle side-slip angle. The effectiveness of the proposed controller, in view of stability and improved handling, has been validated with numerical simulations and a series of experiments during cornering engaging a disturbance torque driven by two rear independent in-wheel motors of a 4WD micro electric vehicle.     

Asymptotic sideslip angle and yaw rate decoupling control in four-wheel steering vehicles

This paper shows that, for a four-wheel steering vehicle, a proportional-integral (PI) active front steering control and a PI active rear steering control from the yaw rate error together with an additive feedforward reference signal for the vehicle sideslip angle can asymptotically decouple the lateral velocity and the yaw rate dynamics; that is the control can set arbitrary steady state values for lateral speed and yaw rate at any longitudinal speed. Moreover, the PI controls can suppress oscillatory behaviours by assigning real stable eigenvalues to a widely used linearised model of the vehicle steering dynamics for any value of longitudinal speed in understeering vehicles. In particular, the four PI control parameters are explicitly expressed in terms of the three real eigenvalues to be assigned. No lateral acceleration and no lateral speed measurements are required. The controlled system maintains the well-known advantages of both front and rear active steering controls: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres and improved manoeuvrability. In particular, zero lateral speed may be asymptotically achieved while controlling the yaw rate: in this case comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced. Also zero yaw rate can be asymptotically achieved: in this case additional stable manoeuvres are obtained in obstacle avoidance. Several simulations, including step references and moose tests, are carried out on a standard small SUV CarSim model to explore the robustness with respect to unmodelled effects such as combined lateral and longitudinal tyre forces, pitch, roll and driver dynamics. The simulations confirm the decoupling between the lateral velocity and the yaw rate and show the advantages obtained by the proposed control: reduced lateral speed or reduced yaw rate, suppressed oscillations and new stable manoeuvres.     

对开路面弯道制动ABS控制策略研究

在对开路面弯道制动工况下分析了轮胎受力情况,提出一种基于转角预测前馈、路径偏移量反馈的车辆最佳滑移率动态调节方法,在SIMPACK中建立汽车多体模型,在MATLAB/Simulink中搭建控制系统,并进行了虚拟在环试验。试验结果显示,与传统ABS相比,所提出的控制方法可以显著改善车辆的侧偏位移、横摆角速度以及制动时方向的稳定性,保证了制动效能,使车辆侧向稳定性得到显著提高。     

融合预瞄与势场栅格法的紧急避撞驾驶人模型

紧急避障工况下的驾驶人操作具有响应快且动作幅值较大的特点，传统预瞄驾驶人模型已不能适应紧急避障工况的需求，故考虑实际避撞场景开发相应的驾驶人模型就显得尤为必要。针对此种状况，基于驾驶模拟器，结合紧急避撞工况实际驾驶人操纵数据，提出了一种融合预瞄与势场栅格法的紧急避撞驾驶人模型。首先针对紧急避撞工况下车辆运动特点，建立车辆横、纵向耦合非线性动力学模型，并给出其状态空间方程描述；其次，离线仿真分析紧急避撞系统特征，并结合线性二次型最优控制，建立最优曲率预瞄+跟踪误差反馈驾驶人模型；再者，基于紧急避撞工况下真实驾驶人经验转向行为数据，开发基于势场栅格法的驾驶人模型，为进一步提高驾驶人模型对避障行驶工况的适应性，将基于势场栅格法的驾驶人模型与最优曲率预瞄+跟踪误差反馈驾驶人模型进行融合，并基于Sigmoid函数实现两者输出的权重分配；最后，针对所提出的融合预瞄与势场栅格法的驾驶人模型，开展基于避撞台架的驾驶人在环仿真试验以及实车试验。研究结果表明：在紧急避撞工况下，对比最优曲率预瞄+跟踪误差反馈驾驶人模型，融合预瞄与势场栅格法的驾驶人模型输出的转向动作与实际驾驶人行为较为接近，可在保证避障安全性的前提下，兼顾避障路径跟踪精度与车辆行驶的稳定性。     

Minimum order bang-bang guidance for feedforward obstacle avoidance steering maneuvers of vehicles

In this paper, a new methodology is presented for computing time-optimal obstacle avoidance maneuvers for ground vehicles. Usually, the problem of obstacle avoidance is addressed in two parts. In the first part a path is planned. In the second an appropriately designed vehicle controller tracks the desired path. In view of the fact that the main problem concerning emergency maneuvers remains the development of an optimal control for minimum time and maximum maneuverability — with respect to the slip risk due to saturation of the tire forces — the authors propose an alternative approach. Considering that the time optimal control according to Pontryagin’s Maximum Principle (PMP) is of bang-bang type the investigations concern the minimum order and magnitude bang-bang control for “feedforward” steering maneuvers with the target of minimizing the computation time and simplifying the algorithm. This is accomplished by keeping the basic PMP logic but transforming the computational algorithm from an exact to a least squares control problem. Furthermore, the paper addresses how to solve the problem of guiding the vehicle from a non rest to a rest position. Simulations of obstacle avoidance maneuvers illustrate the performance of the controller.     

智能汽车对无信号交叉口行人的避撞控制

针对智能汽车在无信号交叉口对横穿行人的避撞问题,研究了主动转向避撞控制策略.基于多层模型预测控制方法,采用分层控制策略设计局部规划层控制器与全局跟踪层控制器,在此基础上根据交叉口处汽车与行人的轨迹特征计算人车碰撞剩余时间,改进传统人工势场法构造避撞函数,规划出既能规避交叉口内存在碰撞风险的行人又能使偏差最小的局部避撞路...     

Handling Capabilities of Vehicles in Emergencies Using Coordinated AFS and ARMC Systems

In this paper, an advanced control technique that can be implemented in hard emergency situations of vehicles is introduced. This technique suggests integration between Active Front Steering (AFS) and Active Roll Moment Control (ARMC) systems in order to enhance the vehicle controllability. For this purpose, the AFS system applies a robust sliding mode controller (SMC) that is designed to influence the steering input of the driver by adding a correction steering angle for maintaining the vehicle yaw rate under control all the time. The AFS system is then called active-correction steering control. The ARMC system is designed to differentiate the front and rear axles' vertical suspension forces in order to alter the vehicle yaw rate and to eliminate the vehicle roll motion as well. Moreover, the operation of the SMC is based on tracking the behavior of a nonlinear 2-wheel model of 2-DOF used as a reference model. The 2-wheel model incorporates real tire characteristics, which can be inferred by the use of trained neural networks. The results clearly demonstrate the enhanced characteristics of the proposed control technique. The SMC with the assistance of the ARMC provides less correction of the steering angle and accordingly reduces the possibility of occurrence of the saturation phenomenon that is likely to take place in the operation of the SMC systems.     

Handling Capabilities of Vehicles in Emergencies Using Coordinated AFS and ARMC Systems

In this paper, an advanced control technique that can be implemented in hard emergency situations of vehicles is introduced. This technique suggests integration between Active Front Steering (AFS) and Active Roll Moment Control (ARMC) systems in order to enhance the vehicle controllability. For this purpose, the AFS system applies a robust sliding mode controller (SMC) that is designed to influence the steering input of the driver by adding a correction steering angle for maintaining the vehicle yaw rate under control all the time. The AFS system is then called active-correction steering control. The ARMC system is designed to differentiate the front and rear axles' vertical suspension forces in order to alter the vehicle yaw rate and to eliminate the vehicle roll motion as well. Moreover, the operation of the SMC is based on tracking the behavior of a nonlinear 2-wheel model of 2-DOF used as a reference model. The 2-wheel model incorporates real tire characteristics, which can be inferred by the use of trained neural networks. The results clearly demonstrate the enhanced characteristics of the proposed control technique. The SMC with the assistance of the ARMC provides less correction of the steering angle and accordingly reduces the possibility of occurrence of the saturation phenomenon that is likely to take place in the operation of the SMC systems.     

基于MPC的分布式驱动越野车辆原地转向控制研究

针对轮毂电机分布式驱动越野车辆在狭小空间快速机动的需求,设计了一种分层结构的原地转向控制策略。基于动力学原理分析了各轮载荷、附着条件对原地转向横摆速度的影响机理,并搭建原地转向运动学模型,上层采用模型预测控制算法设计原地转向理想轨迹以及期望的横摆角速度,开发基于PI滑模控制的横摆运动跟踪算法,通过补偿转向横摆力矩以提高方向角控制的鲁棒性和稳定性,下层以最优轮胎利用率为目标,设计二次规划算法优化分配各轮附加横摆力矩。dSPACE硬件在环测试结果表明,所提出的控制算法可在保证稳定性的前提下实现原地转向,大幅提高了车辆的转向机动性,在方向盘动态输入仿真中,车辆最大转弯半径为0.157 m,转向中心的最大偏移量为3.610 m;同时,驾驶员能对转向过程进行闭环控制,实现了原地转向过程中横摆速度的实时调节。     

面向动态避障的智能汽车滚动时域路径规划

为解决城市低速条件下智能汽车在避障过程中的路径规划问题，提出面向动态避障的智能汽车滚动时域路径规划方法。首先，划分车道可行区域，利用3次拉格朗日插值法拟合车道边界，并根据"车-路"的相对位置关系将车道区域进一步划分为车道间区域与车道内区域两部分。其次，以区域虚拟力场进行动态交通场景模拟，包括在障碍车周身沿车道方向的虚拟矩形区域斥力场，行驶目标位置的虚拟引力场和车道保持虚拟区域引力场3个部分，然后结合划分的车道区域确定各虚拟力场的作用区域。再次，建立主车动力学与运动学模型，障碍车运动学预测模型，把主车与障碍车无碰撞，主车行驶在车道内区域，趋向目标位置以及保证车辆稳定性作为优化目标，综合车辆模型的控制输入、状态变量等动力学约束条件，构建多目标的滚动时域控制器用于车辆避障路径规划，求解获得前轮转角作为控制量。最后，利用MATLAB和veDYNA软件对提出的路径规划控制系统分别在静态障碍和动态障碍工况下进行联合仿真。研究结果表明：该方法能够很好地解决躲避静态障碍和低速动态障碍车的问题，控制车辆驶向目标位置，并且在避障过程中满足车辆的动力学约束，同时又不会与道路边界发生碰撞，保证了车辆的安全性和稳定性。     

Novel stability control strategy for distributed drive electric vehicle based on driver operation intention

In this paper, a novel direct yaw control method based on driver operation intention for stability control of a distributed drive electric vehicle is proposed. It was discovered that the vehicle loses its stability easily under an emergency steering alignment (EA) problem. An emergent control algorithm is proposed to improve vehicle stability under such a condition. A driver operation intention recognition module is developed to identify the driving conditions. When the vehicle enters into an EA condition, the module can quickly identify it and transfer the control method from normal direct yaw control to emergency control. Two control algorithms are designed. The emergency control algorithm is applied to an EA condition while the adaptive control algorithm is applied to other conditions except the EA condition. Both simulation results and real vehicle results show that: The driver module can accurately identify driving conditions based on driver operation intention. When the vehicle enters into EA condition, the emergent control algorithm can intervene quickly, and it has proven to outperform normal direct yaw control for better stabilization of vehicles.     

Robust yaw stability control for electric vehicles based on active front steering control through a steer-by-wire system

A robust yaw stability control design based on active front steering control is proposed for in-wheel-motored electric vehicles with a Steer-by-Wire (SbW) system. The proposed control system consists of an inner-loop controller (referred to in this paper as the steering angle-disturbance observer (SA-DOB), which rejects an input steering disturbance by feeding a compensation steering angle) and an outer-loop tracking controller (i.e., a PI-type tracking controller) to achieve control performance and stability. Because the model uncertainties, which include unmodeled high frequency dynamics and parameter variations, occur in a wide range of driving situations, a robust control design method is applied to the control system to simultaneously guarantee robust stability and robust performance of the control system. The proposed control algorithm was implemented in a CaSim model, which was designed to describe actual in-wheel-motored electric vehicles. The control performances of the proposed yaw stability control system are verified through computer simulations and experimental results using an experimental electric vehicle.     

Coordinated control strategies for active steering,differential braking and active suspension for vehicle stability,handling and safety improvement

ABSTRACT

In this paper, a coordinated control strategy is proposed to provide an effective improvement in handling stability of the vehicle, safety, and comfortable ride for passengers. This control strategy is based on the coordination among active steering, differential braking, and active suspension systems. Two families of controllers are used for this purpose, which are the high order sliding mode and the backstepping controllers. The control strategy was tested on a full nonlinear vehicle model in the environment of MATLAB/Simulink. Rollover avoidance and yaw stability control constraints have been considered. The control system mainly focuses on yaw stability control. When rollover risk is detected, the proposed strategy controls the roll dynamics to decrease rollover propensity. Simulation results for two different critical driving scenarios, the first one is a double lane change and the other one is a J-turn manoeuvre, show the effectiveness of the coordination strategy in stabilising the vehicle, enhancing handling and reducing rollover propensity.     

基于hp自适应伪谱法的智能汽车紧急变道轨迹规划与优化

为了提高智能汽车紧急变道轨迹规划的实时性和适应性,将紧急变道过程分为初始阶段和跟踪阶段,初始阶段的轨迹由优秀驾驶人紧急变道模型产生,跟踪阶段的轨迹采用Sigmoid函数规划出紧急避让路径。首先通过聚类分析处理优秀驾驶人转向操作的实车试验数据,拟合得出紧急变道过程中的方向盘转角随时间的关系（即驾驶人紧急变道模型）,作为智能汽车在紧急变道初始阶段不同速度下车辆控制的输入量。然后通过建立与求解约束方程,满足避撞约束、侧向位移约束以及最大侧向加速度约束,得出Sigmoid函数表达式,作为智能汽车在紧急变道过程跟踪阶段的参考路径。最后利用hp自适应伪谱法加入切换点的物理量约束,逼近全局正交多项式的状态量和控制量,自动调整和处理2个阶段的切换点位置和衔接问题,以最小变道距离为目标对跟踪阶段的变道轨迹进行优化。运用PreScan与MATLAB对4种不同工况下的紧急变道轨迹规划进行联合仿真。结果表明：提出的轨迹规划与优化方法在满足各项约束的情况下成功避开障碍物,同时缩短了需要优化的轨迹,优化时间都小于0.9 s,并且与基于多项式函数轨迹规划方法相比,该方法能够以距障碍物较远的距离避开障碍物,在不同的车辆速度、道路曲率和障碍物宽度的复杂工况下具有更好的适应性。     

基于线性路径跟踪控制的换道避撞控制策略研究

为实现车辆自主避撞,改善道路交通安全状况,提出一种基于线性路径跟踪控制的换道避撞控制策略。为实时确定制动和换道时机,获取跟车状态下自车和前车车速、加速度、相对距离以及驾驶人制动反应时间计算制动安全距离和换道安全距离,并在此基础上分别引入制动危险系数B和换道危险系数S评估制动与换道风险,使得车辆发生追尾碰撞的危险程度和主动干预阈值更直观。根据车辆期望横向加速度和期望横向位移的变化特性,采用5次多项式法规划符合驾驶人换道避撞特性的避撞路径。为保证换道避撞过程中驾驶人的安全舒适,采用最大横向加速度约束换道避撞轨迹。为实现对换道避撞路径的线性跟踪控制,保证车辆的操纵稳定性和横摆稳定性,基于车辆稳态动力学模型建立前馈控制,结合线性反馈控制消除换道路径的位置和横摆角偏差,修正参考路径实现直车道场景追尾避撞控制。仿真和实车交叉验证试验表明：根据车辆期望横向加速度和期望横向位移建立的符合驾驶人换道避撞特性的五次多项式换道路径与驾驶人实际换道避撞路径基本吻合,结合碰撞时间和车间时距的制动避撞控制策略能够在保证车辆行驶安全舒适性的同时有效避免车辆追尾碰撞,减少交通事故的发生。