Anti-Roll and Active Roll Suspensions

Full car roll model is used to show an anti-roll control like that in Citroen's Xantia Activa and the proposed active roll with an in-series active suspension. Computed responses to pulse-shaped anti-phase road unevenness as well as to lateral acceleration in comparison with passive suspension are given in the paper. Also stability values for all parameters can be found.     

An Experimental Study of a Prototype Active Anti-Roll Suspension System

Active roll control is known to offer substantial improvements in ride and handling performance over the most sophisticated passive suspension systems. However although many different active suspension systems have been discussed and analysed through simulation little information regarding experimental performance data from a prototype active roll control system has been published. This study focuses on the design, development, commissioning and experimental evaluation of a roll control suspension based on active anti-roll bar actuation. In tests, the prototype vehicle demonstrated excellent steady state and dynamic roll cancellation within the lateral acceleration range of 0.5g. Subjective assessments of the system confirmed the benefits of a level ride together with the added benefit accrued from the elimination of roll dynamics.     

主动悬架系统对汽车侧翻稳定性改善分析

针对被动悬架系统侧翻稳定性比较差的问题,提出采用主动悬架系统的方法进行改善。通过汽车侧倾运动状态分析,建立了被动悬架系统、主动悬架系统和控制系统模型。模拟分析得到主动悬架系统使得汽车在弯道行驶时的侧倾角有效值下降了92.8%,侧倾角加速度有效值下降了78.2%,侧翻因子有效值下降了92.6%。结果表明:利用主动悬架系统可以有效地降低汽车非直线行驶时的侧倾角以及侧倾角加速度,提高汽车的侧翻稳定性,是提高汽车非直线行驶状态下安全性的一个合理的解决方案。     

Heavy duty vehicle rollover detection and active roll control

This paper presents the results of a comprehensive study on heavy-duty vehicle (HDV) roll stability improvement technology. The proposed rollover threat warning system uses the real-time dynamic model-based time-to-rollover (TTR) metric as a basis for online rollover detections. Its feasibility for implementation in a HDV rollover threat detection system is demonstrated through vehicle dynamic simulation studies. The research on the development of a rollover threat detection system is further enhanced in combination with an active roll control system using active suspension mechanism to improve heavy-duty trucks’ roll stability both in the static cornering and in emergency maneuvers. It has been demonstrated that the roll stability of typical heavy-duty trucks has been largely improved by the proposed active safety monitoring and control system.     

Design of active suspension and electronic stability program for rollover prevention

This paper presents a method for the design of a controller for rollover prevention using active suspension and an electronic stability program (ESP). Active suspension is designed with linear quadratic static output feedback control methodology to attenuate the effect of lateral acceleration on the roll angle and suspension stroke via control of the suspension stroke and tire deflection of the vehicle. However, this approach has a drawback in the loss of maneuverability because the active suspension for rollover prevention produces in vehicles an extreme over-steer characteristic. To overcome this drawback of the active suspension based method, ESP is designed. Through simulations, the proposed method is shown to be effective in preventing rollover.     

7自由度主动悬架整车模型最优控制的研究

应用汽车系统动力学理论,建立了七自由度主动悬架的动力学模型。根据线性二次型最优控制原理设计了主动悬架线性二次型(LQR)控制器,并构建了实现该控制策略的主动悬架控制仿真模型。仿真结果表明:对主动悬架进行最优控制,能够有效地降低车身垂直振动加速度、车身侧倾角加速度和俯仰角加速度。     

兼具馈能与主动抗侧倾功能的电控液压悬架系统设计与研究

为解决特种车辆或载重车辆在极端工况下易侧翻的问题,提出了一种兼具馈能与主动抗侧倾功能的电控液压悬架系统。对该悬架系统的主动抗侧倾模式和馈能模式进行了功能原理设计与分析;针对主动抗侧倾模式与馈能模式,构建了电液悬架系统仿真模型;设计了电液悬架系统主动抗侧倾模糊PID控制策略和侧倾力矩分配方案,以及执行机构逻辑门限值控制策略,并基于Matlab/Simulink、TruckSim和AMESim仿真软件,搭建了电液悬架系统主动抗侧倾控制策略联合仿真平台;对装配有电液悬架系统的车辆模型在极限工况下的抗侧倾性能进行仿真分析,并对车辆在随机路面激励输入下的馈能特性进行仿真分析。结果表明,装配该电液悬架的特种车辆具备较强的防侧翻能力,并具有较好的悬架运动能量回收潜力。     

Rollover mitigation for a heavy commercial vehicle

A heavy commercial vehicle has a high probability of rollover because it is usually loaded heavily and thus has a high center of gravity. An anti-roll bar is efficient for rollover mitigation, but it can cause poor ride comfort when the roll stiffness is excessively high. Therefore, active roll control (ARC) systems have been developed to optimally control the roll state of a vehicle while maintaining ride comfort. Previously developed ARC systems have some disadvantages, such as cost, complexity, power consumption, and weight. In this study, an ARC-based rear air suspension for a heavy commercial vehicle, which does not require additional power for control, was designed and manufactured. The rollover index-based vehicle rollover mitigation control scheme was used for the ARC system. Multi-body dynamic models of the suspension subsystem and the full vehicle were used to design the rear air suspension and the ARC system. The reference rollover index was tuned through lab tests. Field tests, such as steady state cornering tests and step steer tests, demonstrated that the roll response characteristics in the steady state and transient state were improved.     

液压互联悬架抗侧倾控制研究（双语出版）

针对车辆减少能量消耗与提高抗侧倾能力需求,提出了一种主/被动可切换的液压互联悬架抗侧倾控制方法。基于9自由度车辆动力学模型,考虑蓄能器、液压缸、液压泵三者之间耦合的体积-流量-压力特性,建立液压互联悬架主动控制时域模型;结合"车身侧倾角-车身侧倾角速度"相平面法及车辆侧向加速度,得到车辆侧倾稳定域,并提出液压互联悬架系统侧倾稳定性控制介入与退出判据;在此基础上,采用Backstepping非线性控制算法设计主动液压互联抗侧倾控制器。最后,分析并改进侧倾稳定性评价指标,通过在MATLAB/Simulink环境下进行高速双移线、鱼钩试验等极端工况数值仿真,验证所提出的液压互联悬架主/被动切换控制系统能在减少能量消耗的情况下能否提高车辆抗侧翻的能力。研究结果表明：所提出的控制系统能有效提高车辆抗侧翻能力;当车辆侧倾状态超出设定的侧倾稳定区域介入线时,液压互联悬架系统由被动模式切换为主动抗侧倾模式,控制车辆侧倾状态回到稳定区域,以提高车辆侧倾稳定性;当判定车辆侧倾状态满足主动控制退出条件时,液压互联悬架系统回到被动模式,以减小能量消耗。     

Development and Simulation of a Novel Roll Control System for the Interconnected Hydragas® Suspension

The design of passive suspension systems using conventional springs and dampers is limited by the need to compromise between vehicle ride and handling functions. The Interconnected Hydragas Suspension fitted to the current Rover 100 series partially allays this compromise by reducing the vehicle pitch stiffness witfiout affecting the bounce and roll stiffnesses. However, the vehicle body is still subject to roll during cornering manoeuvres. This paper outlines the development and simulation of a sealed low bandwidth active roll control suspension based on the existing Interconnected Hydragas System. Following a brief explanation of the Hydragas suspension operating principle die paper outlines the design of a fluid displacer or 'shuttle'. This shuttle enables control over body roll during manoeuvres by displacing fluid from one side of the car to the other. Care is taken to ensure low power consumption whilst the sealed nature of the fluid based suspension units guarantee reliable operation without leakage. Using computer simulation, the system performance is predicted and compared with experimental measurements. It is shown that roll during manoeuvres can be reduced or eliminated using a minimum of hydraulic components with only moderate power consumption and cost.     

汽车转向与悬架系统的集成控制研究

在建立了汽车转向与悬架系统的综合模型的基础上,运用一种具有扩展的调节器结构LQG控制方法,设计了 主动悬架控制器,实现对车身横摆角速度、车身垂直加速度、车身侧倾角和俯仰角的集成控制,从而显著提高汽车的 平顺性、操纵稳定性和安全性。     

三轴客车侧倾中心线的确定及影响

浅析三轴客车的悬架侧倾中心、侧倾轴线的确定方法，提出等效侧倾中心轴线的概念，为解决一些三轴客车轮胎异常磨损提供理论依据。     

主动底盘系统的发展趋向（上）

本文论述“主动底盘系统”范畴内两个最现实的问题:悬架咸振及四轮转向。关于悬架减振,首先探讨传统悬架的规律,然持阐述主动和半主动悬架系统对悬架可能作出的改进。对所滑“悬空阻尼”系统,着重怍了介绍。四轮转向方面首先论述了比例四轮转向、质心侧偏角补偿和可调节的四轮转向等几种基本型式的理论基础。接着介绍了现有的四轮转向系统。     

主动底盘系统的发展趋向（下）

本文论述“主动底盘系统”范畴内两个最现实的问题:悬架减振及四轮转向。关于悬架减振,首先探讨传统悬架的规律,然后阐述主动和半主动悬架系统对悬架可能作出的改进。对所谓“悬空阻尼”系统,着重作了介绍。四轮转向方面首先论述了比例四轮转向、质心侧偏角补偿和可调节的四轮转向等几种基本型式的理论基础。接着介绍了现有的四轮转向系统。     

Achieving anti-roll bar effect through air management in commercial vehicle pneumatic suspensions

ABSTRACT

This paper introduces the concept of managing air in commercial vehicle suspensions for reducing body roll. A conventional pneumatic suspension is re-designed to include higher-flow air hoses and dual levelling valves for improving the dynamic response of the suspension to the body roll, which commonly happens at relatively low frequencies. The improved air management allows air to get from the air tank to the airsprings quicker, and also changes the side-to-side suspension air pressure such that the suspension forces can more readily level the vehicle body, much in the same manner as an anti-roll bar (ARB). The results of a multi-domain simulation study in AMESim and TruckSim indicate that the proposed suspension configuration is capable of providing balanced airflow to the truck’s drive-axle suspensions, resulting in balanced suspension forces in response to single lane change and steady-state cornering steering maneuvers. The simulation results further indicate that a truck equipped with the reconfigured suspension experiences a uniform dynamic load sharing, smoother body motion (less roll angle), and improved handling and stability during steering maneuvers commonly occurring in commercial trucks during their intended use.     

整车主动悬架系统的数学建模

悬架系统是一个复杂的动力学系统,其模型的精确性、合理性对主动悬架的研究起到决定性作用.为进一步满足车辆乘坐舒适性的要求,以整车模型为研究对象,运用八板块方法进行动力学分析,根据牛顿运动学定律推导出悬架各部分的力学微分方程,从而建立了包含俯仰运动模型、侧倾运动模型和转向运动模型的整车模型,为车辆主动悬架的进一步研究提供了理论基础与依据.     

基于多目标粒子群优化算法的某轻型商用车操纵稳定性优化研究

针对某轻型商用车稳态回转时侧倾度偏大的问题对其悬架进行优化改进。基于ADAMS/car搭建整车多体动力学模型,通过前悬架反向平行轮跳试验、后悬架理论计算验证了悬架仿真模型的准确性。进行整车稳态回转工况和转向盘中间位置转向工况仿真分析,结果表明,车身侧倾度偏高。为实现操纵稳定性优化分析的流程自动化,提出了基于modeFRONTIER的联合仿真方法。以悬架设计参数为优化变量,以汽车的侧倾度与横摆角速度响应滞后时间为优化目标,采用拉丁超立方试验设计方法拟合得到混合代理模型,并结合多目标粒子群优化算法对悬架系统进行多目标优化,获得了悬架系统优化方案。优化结果显示,在不影响平顺性的前提下,汽车车身侧倾度降低了13.93%,横摆角速度响应滞后时间降低了2.75%,整车操纵稳定性得到了提升。     

Advanced Control Methods of Active Suspension

This paper describes new control methods for the active suspension. For improving ride comfort further, preview control rule is proposed. For improving stability further, roll stiffness distribution control rule is examined by the test vehicle. Simulations and vehicle driving tests are conducted to confirm the effect of these new control methods. The results of simulations and vehicle driving tests show in our research phase that preview control can achieve a substantial improvement in ride comfort and application of roll stiffness distribution control provides a large improvement in stability     

某全驱沙漠车悬架侧倾刚度设计研究

以某4x4全驱沙漠车为研究对象,提出了一种简化的整车数学模型,建立了整车侧倾角与板簧、横向稳定杆刚度的函数关系,得到悬架侧倾角刚度对整车侧倾性能的影响。并介绍了横向稳定杆角刚度计算方法,前后悬架侧倾角刚度匹配原则。     

大客车空气悬架气囊刚度对侧倾稳定性影响的仿真研究

以某6127型客车为例,利用ADAMS建立整车侧倾稳定性试验仿真模型．研究悬架气囊刚度变化对客车侧倾稳定性的影响,分析该车悬架气囊刚度变化对侧倾稳定性影响的敏感程度。