大型组块拖航运输强度分析研究

采用基于频域分析的设计波法,对某大型组块运输进行三维全耦合数值模拟和计算分析,把驳船和组块作为一个整体结构,计入驳船的柔度对组块的结构强度的影响,建立总体结构模型和水动力模型,采用SESAM软件包的多个软件程序进行数值模拟,确保运动分析和结构计算的准确性。     

Simplified analytical method for evaluating web girder crushing during ship collision and grounding

The paper presents a simplified analytical method to examine the crushing resistance of web girders subjected to local static or dynamic in-plane loads. A new theoretical model, inspired by existing simplified approaches, is developed to describe the progressive plastic deformation behaviour of web girders. It is of considerable practical importance to estimate the extent of structural deformation within ship web girders during collision and grounding accidents. In this paper, new formulae to evaluate this crushing force are proposed on the basis of a new folding deformation mode. The folding deformation of web girders is divided into two parts, plastic deformation and elastic buckling zones, which are not taken into account for in the existing models. Thus, the proposed formulae can well express the crushing deformation behaviour of the first and subsequent folds. They are validated with experimental results of web girder found in literature and actual numerical simulations performed by the explicit LS-DYNA finite element solver. The elastic buckling zone, which absorbs almost zero energy, is captured and confirmed by the numerical results. In addition, the analytical method derives expressions to estimate the average strain rate of the web girders during the impact process and evaluates the material strain rate sensitivity with the Cowper-Symonds constitutive model. These adopted formulae, validated with an existing drop weight impact test, can well capture the dynamic effect of web girders.     

预测船体分段焊接变形方法概述

船体分段在焊接过程中产生的焊接变形会使船体结构强度降低,精确预测和控制焊接变形是现代造船工艺的要求.焊接变形分析方法包括实验法、解析法、数值分析法、等效载荷法等,常用的是后两种方法.数值分析法采用热弹-塑性有限元模型精确模拟焊接现象,但计算工作量大;等效载荷法计算焊接区域的固有应变,并将其转化为等效载荷,进而应用弹性有限元分析求得整个结构的焊接变形.     

驳船载导管架拖航及下水工况中的结构强度分析

根据相关规范,应用ANSYS有限元软件对上海船舶研究设计院的导管架拖航/下水驳船的设计方案进行了结构强度的有限元分析.为取得可靠的计算精度,对导管架、滑道和驳船均进行了精确的有限元建模,对该设计方案进行了多工况的应力和变形的计算,给出了有限元模型建立过程中单元的选取、网格剖分以及约束和载荷的处理方法,并对计算结果进行了分析,从而提出了结构改进建议和作业环境要求.本文的研究成果为驳船的设计及结构强度分析提供了参考方法.     

Plastic mechanism analysis of structural performances for stiffeners on bottom longitudinal web girders during a shoal grounding accident

A theoretical model is introduced in this paper for structural performance of stiffeners on double-bottom longitudinal girders in a shoal grounding accident. Major emphasis is placed on establishing the characteristic deformation mechanism of stiffeners and identifying major energy dissipation patterns. Numerical simulations using the LS-DYNA nonlinear finite-element program were carried out to examine thoroughly the progressive deformation process during sliding deformation. Stiffener deformations were observed to fall into two categories: stiffeners fully contacted with the indenter, and stiffeners subjected to indirect deformation due to energy transfer from attached girders. Grounding performance of stiffeners is substantially influenced by that of the attached plating, and therefore a review of the existing deformation models of longitudinal girders (i.e. Simonsen 1997, Midtun 2006 and Hong 2008) was included. Hong's model of bottom girders was found not capable of representing the effects of stiffeners, and a new model of girders was thus developed. Based on observation of the numerical deformation process and the new analytical girder model, a kinematically admissible model of stiffeners on bottom longitudinal girders was built. Using the methods of plastic mechanism analysis, simplified analytical expressions for energy dissipation by girder-attached stiffeners, both fully contacted and noncontacted, were formulated, and equations for grounding resistance were subsequently obtained. The theoretical expressions agree favorably with results from nonlinear finite-element simulations and capture two significant characteristics of the problem: that energy varies little with indentation for stiffeners that fully contacting the indenter, and that energy is independent of slope angle for indirectly deformed stiffeners. The proposed theoretical model helps to predict analytically shoal grounding performance of stiffeners on longitudinal girders with reasonable accuracy.     

下水驳船调载阀门开关时间优化算法研究(英文)

利用下水驳船移运船舶产品是一种提高船厂修造船能力的有效方式.在船舶产品移运上驳过程中,要求驳船通过调节自身压载水舱水量使驳船始终保持与码头岸边齐平.在调载过程中,调节水舱阀门打开时间是影响驳船浮态的重要因素.本文通过对调载过程特征分析,并考虑产品上驳速度以及潮位变化等参数影响,建立了适当数学模型,分别采用惩罚函数法、网格法和模拟退火法进行求解.通过实例计算与结果分析比较,确定了合适的优化模型和对应解法,同时也证明了本文所述方法的正确性和实用性.     

Nonlinear numerical analysis and progressive damage assessment of a cable-stayed bridge pier subjected to ship collision

Despite many studies on barge collisions with girder bridges in the literature, this paper investigates the progressive damage behaviors and nonlinear failure modes of a cable-stayed bridge pier subjected to ship collisions using finite element (FE) simulations in LS-DYNA. The damages in the pier initiate with appearing of local shear failures in the slender columns during the ship collision stage and reach the severe cross-sectional fractures associated with the formation of plastic hinges which causes the combined shear-flexural failures during the free vibration phase of the pier response. In addition, an analytical simplified model with two-degree-of-freedom (2-DOF) is proposed to formulate the strain rate effects of the concrete materials as the dynamic increase factors in the global responses of the impacted pier. It is found that the analytical model is able to efficiently estimate the impact responses of the structure compared to those from the FE high-resolution simulations. Moreover, three different damage indices are proposed based on the pier deflection, the internal energy absorbed by the pier, and the axial load capacity of the pier columns to classify the damage levels of the pier. Finally, an efficient damage index method is determinant by comparing the calculated results with the damage behaviors of the pier observed from the FE simulations.     

基于特征函数展开方法计算水深变化区域驳船运动响应

本文主要研究在近岸水深变化区域两维矩形驳船的运动.变化底部被分解为连续的阶梯且驳船所在流体域被划分为一系列矩形子域.在每个流体子域中采用特征函数展开方法表达速度势,并通过连续性假设求解速度势的值.文中对计算方法的收敛性进行了讨论并给出表达式中参数的推荐值.本文计算驳船在平底和斜底条件下的水动力系数并与文献结果进行对比,同时把驳船在非规则波中的运动响应与水池试验结果进行了对比验证.     

大型复杂船体分段焊接变形研究

为了预估大型复杂船体分段的焊接变形,运用热弹塑性法计算典型结构的焊接变形,得出典型船体分段的固有应变,采用固有应变法计算该船体分段焊接变形,并与实测结果进行对比验证。结果表明:采用固有应变法计算大型复杂船体分段的焊接变形是可行的;船体分段焊接变形呈现整体外张的趋势,且两舷侧边缘位置的焊接变形量最大。     

基于倒置单摆原理的海上风机塔柱和转子机舱新的安装过程的数值模拟研究（英文）

Current installation costs of offshore wind turbines(OWTs) are high and profit margins in the offshore wind energy sector are low, it is thus necessary to develop installation methods that are more efficient and practical. This paper presents a numerical study(based on a global response analysis of marine operations) of a novel procedure for installing the tower and Rotor Nacelle Assemblies(RNAs) on bottom-fixed foundations of OWTs. The installation procedure is based on the inverted pendulum principle. A cargo barge is used to transport the OWT assembly in a horizontal position to the site, and a medium-size Heavy Lift Vessel(HLV) is then employed to lift and up-end the OWT assembly using a special upending frame. The main advantage of this novel procedure is that the need for a huge HLV(in terms of lifting height and capacity) is eliminated. This novel method requires that the cargo barge is in the leeward side of the HLV(which can be positioned with the best heading) during the entire installation. This is to benefit from shielding effects of the HLV on the motions of the cargo barge, so the foundations need to be installed with a specific heading based on wave direction statistics of the site and a typical installation season. Following a systematic approach based on numerical simulations of actual operations, potential critical installation activities, corresponding critical events, and limiting(response) parameters are identified. In addition, operational limits for some of the limiting parameters are established in terms of allowable limits of sea states. Following a preliminary assessment of these operational limits, the duration of the entire operation, the equipment used, and weather-and water depth-sensitivity, this novel procedure is demonstrated to be viable.     

驳船升沉运动和波浪联合作用对沉管管段运动特性的影响

文章探讨驳船吊挂沉放法进行沉管管段的沉放作业过程中,驳船升沉运动和波浪联合作用对沉管管段运动特性的影响。采用边界元方法求解作用在沉管管段的波浪力,驳船升沉运动考虑为简谐运动,应用四阶Runge-Kutta方法求解沉管管段的运动方程。通过数值算例分析,探讨了驳船做不同振幅与不同相位的升沉运动和波浪联合作用下沉管管段的运动特性。     

水下爆炸气泡能载荷对单层板架塑性变形的影响研究

针对气泡能载荷对单层板架在水下非接触爆炸载荷作用下塑性变形的影响问题,运用能量法原理,计算了考虑气泡能载荷影响的单层板架的塑性变形,计算结果与试验结果一致。在此基础上,分析了径距比与由气泡能引起单层板架变形占总变形的比例之间的关系。结果表明：在计算工况下,气泡能载荷对单层板架塑性变形的影响不可忽略,其所引起的单层板架变形占总变形25%左右。     

An analytical method for predicting the ship side structure response in raked bow collisions

As an increasing number of ships continue to sail in heavy traffic lanes, the possibility of collision between ships has become progressively higher. Therefore, it is of great importance to rapidly and accurately analyse the response and consequences of a ship's side structure subjected to large impact loads, such as collisions from supply vessels or merchant vessels. As the raked bow is a common design that has a high possibility of impacting a ship side structure, this study proposes an analytical method based on plastic mechanism equations for the rapid prediction of the response of a ship's side structure subjected to raked bow collisions. The new method includes deformation mechanisms of the side shell plating and the stiffeners attached. The deformation mechanisms of deck plating, longitudinal girders and transverse frames are also analysed. The resistance and energy dissipation of the side structure are obtained from individual components and then integrated to assess the complete crashworthiness of the side structure of the struck ship. The analytical prediction method is verified by numerical simulation. Three typical collision scenarios are defined in the numerical simulation using the code LS_DYNA, and the results obtained by the proposed analytical method and those of the numerical simulation are compared. The results correspond well, suggesting that the proposed analytical method can improve ship crashworthiness during the design phase.     

20000 t浮动核电站驳船与补给船碰撞计算分析

浮动核电站驳船作为反应堆的承载结构,其耐撞性能与发生碰撞时反应堆部位的冲击环境对核电站的运行安全有十分重要的影响。文章参考俄罗斯即将投入运营的"罗蒙诺索夫"号浮动核电站的结构形式和布置情况,在ANSYS/LSDYNA中建立了浮动核电站驳船与其中的小型核反应堆及其主要管路的简化有限元模型,对驳船舷侧在与补给船球鼻首发生微能碰撞时结构的变形损伤情况进行分析,并通过计算核反应堆关键位置处的冲击谱,对碰撞过程中反应堆部位的冲击环境进行了分析,为管路相关设备的冲击设计提供参考。     

碰撞/搁浅事故中船体强桁材结构损伤机理解析预报方法研究

随着航运业的快速发展,海上航行的船舶越来越多.尽管人们做了许多努力避免海上意外事故的发生,但海难事故依然不可避免.为了降低上述事故造成的损失,需要在设计阶段快速并准确地预报船舶的结构耐撞性.本文以强桁材结构为研究对象,通过开展准静态冲压试验及相应的数值仿真,分析强桁材结构在面内冲压载荷作用下的变形机理,并基于试验与仿真所得到的结构变形特点,提出强桁材面内受压时的变形模式.以此为基础,运用塑性力学理论,推导出结构变形能、瞬时结构变形抗力及平均结构变形抗力的解析预报公式,并将计算结果与试验结果进行比较验证.研究得到的结构面内受压变形能和抗力解析计算公式,可以快速评估事故载荷下结构的响应情况,包括结构变形阻力及能量耗散,具有使用方便,计算速度快,计算结果相对可靠的优点,对船体耐撞结构设计及抗撞性能评估具有一定的指导意义.     

固有变形计算方法及其在船舶焊接结构变形中的应用

采用基于固有应变法的弹性有限元分析预测大型复杂结构的焊接变形的前提是必须已知焊缝附近的固有变形。结构的焊接残余应力与焊接变形取决于其接头的固有变形大小及分布,因此开发精确计算接头固有变形的方法,并依此建立一个完善的固有变形数据库对于大型复杂结构焊接变形的预测有重要意义。文中提出了几种计算固有变形的方法包括公式法、热弹塑性有限元法、实测法,并分别采用这几种方法对典型T型接头的横向固有收缩与纵向固有收缩进行计算,三种方法得到的结果比较一致。在此基础上,进一步以典型船体结构为研究对象,采用依照这三种方法建立的固有变形数据库对其焊接变形进行预测,并与实测数据进行比较,验证了该数据库的有效性。     

T型驳船过渡区域设计及强度分析

T型驳船可以显著提升驳船的最大导管架下水能力和最大组块浮托安装能力,在其船中为船宽过渡区,同时最大弯矩和剪力也出现在该区域,导致其结构复杂。目前已经建成的T型驳船均为方驳改造而成。通过对一艘新建T型驳船过渡区域的结构进行合理设计,同时完成不同设计工况的有限元强度分析,使结构更加可靠,减少了以往改造驳船造成的复杂结构和应力集中现象,同时满足规范及使用要求。     

浅水铺管船托管架连接点损伤分析和优化设计

针对由特厚高强度钢板组焊而成的托管架连接点结构在实际工程中的损伤情况,文中通过对典型工况下铺管船托管架、铺设管线和船体的整体有限元分析及损伤区域局部有限元分析,利用ABAQUS/Explicit显式分析方法,对最大环境载荷及操作载荷下的构件进行应力分析和低频冲击载荷分析,探讨了结构变形和损伤产生的原因和设计的优化方向。     

船体长期监测系统的应用现状及发展趋势

船体长期监测系统(SHLTMS)用于对船体重要结构、关键构件及敏感部位进行结构应力实时监测和船体强度在线评估,时刻了解船体在各级海况下船体各部分的应力状态及运动状态。它对保障船体结构和人员安全、指导船舶的操纵以及船体寿命评估具有十分重要的意义。本文首先对船体长期监测系统进行概述,简要介绍船体长期监测系统的工程价值,接着对船舶长期监测系统的发展与应用现状进行分析,详细阐述国内外一些具有代表性的工程应用成果。最后对船舶长期监测系统存在的问题和未来发展趋势进行论述,为后续研究提供借鉴。     

铰连接在深水S型铺管中的应用

为了能够在S型铺管过程中将管线、船体和托管架三者作为一个整体进行耦合分析,使用势流理论用于计算船体受到的波浪力,广义弹性接触面法模拟托辊与管线之间的接触,采用带有铰接刚度的铰连接来模拟管线的上弯段,集中质量法用于模拟管线的中垂段和下弯段。通过时域全耦合方程将整个系统联立求解,并将这种方法的结果和未考虑上弯段管线接触的结果与实验值进行了对比发现:新计算方法能够使管线受力和船体运动都更为接近于实际值。对管线张力进行了谱密度分析,得到了对管线张力作用较大的频谱范围,为其在不同海况下的适应性提供了技术参数。