Experimental research on dynamic responses characteristics and influence laws of gear transmission-propulsion system under gear excitation北大核心CSCD

［Objective］In order to study the dynamic response characteristics and influence laws of a marine gear transmission-propulsion system, a series of bench tests is carried out.［Methods］First, a biaxial gear transmission-propulsion system test bench including a cross connection gear is built. Experiments to test the acceleration response of the gearbox body and propulsion shaft system are then carried out, and the influence of speed, driving mode, axial static thrust, axial dynamic excitation force from the propeller and other factors on the dynamic response characteristics of the system are compared and analyzed. ［Results］The experimental results show that the transmission law of the vibration acceleration response of the gear transmission-propulsion system is mainly at the meshing frequency and its multipliers, as well as peaks in the low frequency band of 30–80 Hz under certain working conditions. ［Conclusion］This study can provide technical support for the vibration and noise reduction design of gear transmission-propulsion systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

FEA for designing of floating raft shock-resistant system

Choosing the equipment with good shock-resistant performance and taking shock protection measures while designing the onboard settings, the safety of onboard settings can be assured when warships, especially submarine subjected to non-contact underwater explosion, that is, these means can be used to limit the rattlespace (i. e. , the maximum displacement of the equipment relative to the base) and the peak acceleration experienced by the equipment. Using shock-resistant equipments is one of shock protection means. The shock-resistant performance of the shock-resistant equipments should be verified in the design phase of the equipments. The FEA (finite element analysis) software, for example, MSC. NASTRANw, can be used to verify the shock-resistant performance. MSC. PATRAN and MSC. NASTRAN are used for modeling and analyzing the floating raft vibration isolating equipment. The model of the floating raft and the floating raft vibration isolating system are theoretically analyzed and calculated, and the analysis results are in agreement with the test results. The transient response analysis of the system model follows the modal analysis of the floating raft vibration isolating system. And it is used to verify the shock-resistant performance. The analysis and calculation method used in this paper can be used to analyze the shock-resistant performance of onboard shock-resistant equipments.     

Uncertainty analysis of propulsion shafting vibration北大核心CSCD

［Objective］In view of the insufficient safety and reliability of the traditional deterministic vibration analysis of ship propulsion shafting system, the vibration response analysis of the shafting system under uncertain excitation conditions is carried out. ［Methods］Using non-random vibration analysis based on non-probabilistic convex model process, the uncertain excitation and vibration response are described in the form of the upper and lower bounds of the interval to reduce dependence on a large amount of excitation sample data. Compared with the calculation results in the relevant literature, the validity of the program for solving the response bound of the two-degrees-of-freedom (2-DOFs) system is verified, and the uncertain vibration problem of the shafting system is then explored on this basis. ［Results］The results show that when the shafting system is excited by [−30 N, 30 N] propeller laterally, a displacement response of the magnitude of about 10−6 m is generated at the bearing. It is also indicate that the shafting system is excited in a certain interval, so a certain interval response must be produced. ［Conclusions］Applying the non-probabilistic convex model process and non-random vibration analysis to the field of the uncertain vibration analysis of ship propulsion shafting system, the vibration displacement response bound of the shafting under uncertain excitation conditions can be obtained with fewer excitation samples, thereby providing useful references for improving the robustness of the dynamic response prediction of ship propulsion shafting systems. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Application of fuzzy neural network to the nuclear power plant in process fault diagnosis

The fuzzy logic and neural networks are combined in this paper, setting up the fuzzy neural network (FNN) ; meanwhile, the distinct differences and connections between the fuzzy logic and neural network are compared. Furthermore, the algorithm and structure of the FNN are introduced. In order to diagnose the faults of nuclear power plant, the FNN is applied to the nuclear power plant, and the intelligence fault diagnostic system of the nuclear power plant is built based on the FNN . The fault symptoms and the possibility of the inverted U-tube break accident of steam generator are discussed. In order to test the system‘ s validity, the inverted U-tube break accident of steam generator is used as an example and many simulation experiments are performed. The test result shows that the FNN can identify the fault.     

Study of station and attitude maneuver of submergence rescue vehicle

It is an important control process to operate motion of an submergence rescue vehicle(SRV). Seeing that the motion of the submergence rescue vehicle is special, it is necessary to employ non-linear predictive control system. For this reason, continuous dynamic performance of the system, the logical components and the operative restraints are expressed as the non-linear equations of state with the inequality restraints, and the model principle of hybrid system is introduced. The conclusion shows that it comes true to exactly control position and attitude of the SRV by means of non-linear model predictive control. The test in a model basin has also proved that the above methods are efficient.     

Seabed collision emergency decision-making of AUV based on safety domain model北大核心CSCD

［Objectives］To ensure safety and prevent seabed collisions in complex unknown underwater environments, this study proposes a seabed safety domain model and tiered emergency response strategies. ［Methods］A vertical motion simulation model is established and verified by surpassing the test results, then used to calculate the active and passive safety domain distance of an autonomous underwater vehicle (AUV), thereby establishing a seabed safety domain model. An AUV emergency control system and emergency strategies are then built on the basis of the dynamic safety domain model. The trim and distance from the seabed of the AUV are used to calculate the current and future risk factors. Based on the weighted sum, the comprehensive risk factor is employed to provide the AUV with emergency response strategies.［Results］Lake tests with the AUV sailing at a fixed depth and height show a strong dependency of the comprehensive risk coefficient on seabed height when it is close to the boundary of the AUV's active safety domain. In the opposite case, there is a weak dependency of the comprehensive risk coefficient on seabed height. The results show that the proposed AUV emergency control system can reduce emergency false alarms caused by frequently changing riverbed heights and sailing altitudes close to the seabed. In such cases, reasonable emergency strategies can be realized under complex rough terrain.［Conclusions］The AUV seabed safety domain model and tiered emergency response strategies based on vertical motion equations proposed herein can be applied to evaluate seabed collision risk in various cases. Finally, this paper provides emergency response strategies to avoid seabed collision accidents, which can enhance the safety of AUV navigation. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Underwater hydraulic shock shovel control system

The control system determines the effectiveness of an underwater hydraulic shock shovel. This paper begins by analyzing the working principles of these shovels and explains the importance of their control systems. A new type of control system’s mathematical model was built and analyzed according to those principles. Since the initial control system’s response time could not fulfill the design requirements, a PID controller was added to the control system. System response time was still slower than required, so a neural network was added to nonlinearly regulate the proportional element, integral element and derivative element coefficients of the PID controller. After these improvements to the control system, system parameters fulfilled the design requirements. The working performance of electrically-controlled parts such as the rapidly moving high speed switch valve is largely determined by the control system. Normal control methods generally can’t satisfy a shovel’s requirements, so advanced and normal control methods were combined to improve the control system, bringing good results.     

Development of study on the dynamic characteristics of deep water mooring system

To meet the needs of those exploiting deepwater resources, TLP and SPAR platforms are used in some areas and are considered excellent platforms in deep water. However, many problems remain to be resolved. The design of mooring systems is a key issue for deep water platforms. Environmental loads in deep water effect the physical characteristics of mooring line materials. The configuration and analysis of mooring systems involve nonlinearity due to this fluid-solid coupling, nonlinear hydrodynamic forces, and their effects on stability of motion. In this paper, some pivotal theories and technical questions are presented, including modeling of mooring lines, the theory and method of coupled dynamics analysis on the mooring system, and the development of methodologies for the study of nonlinear dynamics of mooring systems. Further study on mooring systems in deep water are recommended based on current knowledge, particularly dynamic parameters of different materials and cable configuration, interactions between seabed and cable, mechanisms of mooring system response induced by taut/slack mooring cables, discontinuous stiffness due to system materials, mooring construction, and motion instability, etc.     

深水起重铺管船横摇运动性能分析(英文)

For a large floating vessel in waves,radiation damping is not an accurate prediction of the degree of roll unlike other degrees of freedom motion.Therefore,to get the knowledge of roll motion performance of deepwater pipelay crane vessels and to keep the vessel working safety,the paper presents the relationship between a series of dimensionless roll damping coefficients and the roll response amplitude operator(RAO).By using two kinds of empirical data,the roll damping is estimated in the calculation flow.After getting the roll damping coefficient from the model test,a prediction of roll motion in regular waves is evaluated.According to the wave condition in the working region,short term statistics of roll motion are presented under different wave parameters.Moreover,the relationship between the maximal roll response level to peak spectral wave period and the roll damping coefficient is investigated.Results may provide some reference to design and improve this kind of vessel.     

基于INSGA-Ⅱ的等效水深截断系统优化设计(英文)

At present,equivalent water depth truncated mooring system optimization design is regarded as the priority of hybrid model testing for deep sea platforms,and will replace the full depth system test in the future.Compared with the full depth system,the working depth and span are smaller in the truncated one,and the other characteristics maintain more consistency as well.In this paper,an inner turret moored floating production storage & offloading system(FPSO) which works at a water depth of 320m,was selected to be a research example while the truncated water depth was 80m.Furthermore,an improved non-dominated sorting genetic algorithm(INSGA-II) was selected to optimally calculate the equivalent water depth truncated system,considering the stress condition of the total mooring system in both the horizontal and vertical directions,as well as the static characteristic similarity of the representative single mooring line.The results of numerical calculations indicate that the mathematical model is feasible,and the optimization method is fast and effective.     

船用玻璃纤维增强复合材料与钢连接结构的力学特性（英文）

The use of a glass-fiber reinforced composite in marine structures is becoming more common, particularly due to the potential weight savings. The mechanical response of the joint between a glass-fiber reinforced polymer(GRP) superstructure and a steel hull formed is examined and subsequently modified to improve performance through a combined program of modeling and testing. A finite-element model is developed to predict the response of the joint. The model takes into account the contact at the interface between different materials, progressive damage, large deformation theory, and a non-linear stress-strain relationship. To predict the progressive failure, the analysis combines Hashin failure criteria and maximum stress failure criteria. The results show stress response has a great influence on the strength and bearing of the joint. The Balsawood-steel interface is proved to be critical to the mechanical behavior of the joint. Good agreement between experimental results and numerical predictions is observed.     

Research on the strategy of underwater united detection fusion and communication using multi-sensor

In order to solve the distributed detection fusion problem of underwater target detection, when the signal to noise ratio (SNR) of the acoustic channel is low, a new strategy for united detection fusion and communication using multiple sensors was proposed. The performance of detection fusion was studied and compared based on the Neyman-Pearson principle when the binary phase shift keying (BPSK) and on-off keying (OOK) modes were used by the local sensors. The comparative simulation and analysis between the optimal likelihood ratio test and the proposed strategy was completed, and both the theoretical analysis and simulation indicate that using the proposed new strategy could improve the detection performance effectively. In theory, the proposed strategy of united detection fusion and communication is of great significance to the establishment of an underwater target detection system.     

Hydrodynamic comparison of a semi-submersible, TLP, and Spar: Numerical study in the South China Sea environment

The South China Sea contains tremendous oil and gas resources in deepwater areas. However, one of the keys for deepwater exploration, the investigation of deepwater floating platforms, is very inadequate. In this paper, the authors studied and compared the hydrodynamics and global motion behaviors of typical deepwater platforms in the South China Sea environment. The hydrodynamic models of three main types of floating platforms, e.g. the Semi-submersible, tension leg platform (TLP), and Truss Spar, which could potentially be utilized in the South China Sea, were established by using the 3-D potential theory. Additionally, some important considerations which significantly influence the hydrodynamics were given. The RAOs in frequency domains as well as global motions in time domains under time-varying wind, random waves, and current in 100-y, 10-y, and 1-y return period environment conditions were predicted, compared, and analyzed. The results indicate that the heave and especially the pitch motion of the TLP are favorable. The heave response of the Truss Spar is perfect and comparable with that of the TLP when the peak period of random waves is low. However, the pitch motion of Truss Spar is extraordinarily larger than that of Semi-submersible and TLP.     

Research on cylindrical shell vibration reduction systems

Longitudinal and horizontal vibration must both be reduced in an effective vibration isolation system. We present a cylindrical shell vibration isolator as a dynamic system composed of four springs and dampers. Vibration is directly produced by the motion of machinery, and more is subsequently generated by harmonic frequencies within their structure. To test the effectiveness of our isolator, we first determined equations for the transmission of vibration from the machine to its cylindrical shell. Damping effects produced by the vibration parameters of our system are then analyzed.     

Measuring the effectiveness of methods for evaluating noise jammers

Reliable evaluations of a noise jammer's effectiveness are necessary to properly design, manufacture, and operate one, so it is important to have an evaluation model. Based on their characteristics and principles, relevant factors were classified in terms of their contribution to a unit's effectiveness. In this way an evaluation index system was established. In the proposed mathematical model a noise jammer is analyzed by combining the model of system effectiveness with the method of analytic hierarchical process. A simulation of underwater acoustic countermeasures was used to test the rationality and feasibility of the model. The results showed that this model is an effective way to solve the challenge of evaluating the effectiveness of non-offensive weapons under single working phase.     

Shock resistance of supercharged boilers through integration with ship structure

The non-linear finite element software ABAQUS was used to simulate the dynamic response of a marine supercharged boiler when subjected to impact loading. Shock resistance was analyzed by the time-domain simulation method. After exhaustive simulations,the effect of air pressure induced by different working conditions on the shock response of a supercharged boiler was reviewed,leading to conclusions about the variability of structural response with different loading parameters. In order to simulate the real impulsive environments of supercharged boilers,the integration of equipment and ship structure was then primarily used to analyze shock response. These distinctly different equipment shock test methods,run under equivalent work conditions,were compared and the causes of discrepancy were analyzed. The main purpose of this paper is to present references for the anti-shock design of marine supercharged boilers.     

船舶动力系统中齿轮箱故障特征提取与模式识别方法研究

A marine propulsion system is a very complicated system composed of many mechanical components.As a result,the vibration signal of a gearbox in the system is strongly coupled with the vibration signatures of other components including a diesel engine and main shaft.It is therefore imperative to assess the coupling effect on diagnostic reliability in the process of gear fault diagnosis.For this reason,a fault detection and diagnosis method based on bispectrum analysis and artificial neural networks (ANNs) was proposed for the gearbox with consideration given to the impact of the other components in marine propulsion systems.To monitor the gear conditions,the bispectrum analysis was first employed to detect gear faults.The amplitude-frequency plots containing gear characteristic signals were then attained based on the bispectrum technique,which could be regarded as an index actualizing forepart gear faults diagnosis.Both the back propagation neural network (BPNN) and the radial-basis function neural network (RBFNN) were applied to identify the states of the gearbox.The numeric and experimental test results show the bispectral patterns of varying gear fault severities are different so that distinct fault features of the vibrant signal of a marine gearbox can be extracted effectively using the bispectrum,and the ANN classification method has achieved high detection accuracy.Hence,the proposed diagnostic techniques have the capability of diagnosing marine gear faults in the earlier phases,and thus have application importance.     

Parameter optimization and parametric deviation influence for shock resistance of double-stage vibration isolation system with limiters北大核心CSCD

［Objectives］For marine nuclear power plants, the relative displacement of the pump supported by a vibration isolation system should be strictly restricted. In order to improve the shock resistance of a vibration isolation system with displacement limiters, the parameter optimization and parametric deviation influence are studied. ［Methods］The theoretical model of a double-stage vibration isolation system with typical limiter parameters is established, the analysis of the shock response characteristics of the system is carried out using the direct integration method, the optimal limiter parameters are obtained using a genetic algorithm, and the influence of parameter deviation on the shock resistance of the system is studied. ［Results］Limiter parameters significantly affect the shock response characteristics of the vibration isolation system. The optimal limiter parameters improve the shock resistance of the system, but parameter deviation has a great influence on shock resistance. Based on the influence of parameter deviation, a deviation control strategy is proposed in which the elastic parameter should have a positive deviation and the gap parameter a negative deviation. The simulation results show that the proposed strategy can effectively alleviate the shock resistance degradation caused by deviation.［Conclusions］The results of this study can be used to guide the design, manufacturing and variation control of limiters for vibration isolation systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Research and implementation of digital detection method on closed loop FOG

In the strapdown inertial navigation system, the Fiber Optical Gyro(FOG) must have high precision to give accurate navigation information. In this paper, a digital closed loop detection method based on the ramp wave modulating technigue is introduced. DSP and FPGA have many advantages in digital signal processing. In the design, by using DSP,a complex arithmetic operation is completed to meet the needs of closed loop control of FOG within a short time. All kinds of control signals are produced easily by FPGA, under which DSP could work properly. Combining the DSP and FPGA,the detecting method is implemented successfully. In the end, the result of test and performance is given. From the result we can conclude that the precision of FOG is improved and the noises are limited to a low level.     

Material Selection for Hawsers for a Side-by-side Offloading System

In order to provide a theoretical guide for choosing the material for the hawsers for the FPSO side-by-side offloading system, which is moored by the yoke system, the 3D potential flow theory and full coupled time-domain analysis are presented to study the dynamic response of the offloading system. The MingZhu FPSO offloading system in the field BZ25-1 is simulated here; and four different characteristic fiber ropes are used as the material for the hawsers. To acquire an accurate hawser line tension, the polynomial fitting method is used to calculate the nonlinear stiffness of the hawsers. By comparing the hawser lines＇ tension and the relative motion between the FPSO and the shuttle tanker, a suitable material for the hawser lines is chosen and discussed in this paper. The results indicate that the nonlinear stiffness characteristic of the fiber rope has a small effect on the relative motion of the vessels, but the hawser lines＇ tension is greatly influenced by the different characteristics of the fiber ropes. The hawser lines＇ tension with nonlinear stiffness is in accordance with the one with the upper and lower bound linear stiffness, which proves this method of fitting the fiber ropes＇ nonlinear stiffness is reasonable and reliable.