CFD simulation of propeller and rudder performance when using additional thrust fins

To analyse a possible way to improve the propulsion performance of ships,the unstructured grid and the Reynolds Average Navier-Stokes equations were used to calculate the performance of a propeller and rudder fitted with additional thrust fins in the viscous flow field.The computational fluid dynamics software FLUENT was used to simulate the thrust and torque coefficient as a function of the advance coefficient of propeller and the thrust efficiency of additional thrust fins. The pressure and velocity flow behind the propeller was calculated. The geometrical nodes of the propeller were constituted by FORTRAN program and the NUMBS method was used to create a configuration of the propeller,which was then used by GAMMBIT to generate the calculation model. The thrust efficiency of fins was calculated as a function of the number of additional fins and the attack angles. The results of the calculations agree fairly well with experimental data,which shows that the viscous flow solution we present is useful in simulating the performance of propellers and rudders with additional fins.     

The asymptotic field of a dynamically growing crack in a viscoelastic materia

A mechanical model of a fracturing viscoelastic material was developed to investigate viscous effects in a dynamically growing crack-tip field. It was shown that in the stable creep-growing phase,elastic deformation and viscous deformation are equally dominant in the near-tip field,and stress and strain have the same singularity,namely,(σ,ε ) ∝ r?1 /( n?1) . The asymptotic solution of separating variables of stress,stain and displacement in the crack-tip field was obtained by asymptotic analysis,and the resulting numerical value of stress and strain in the crack-tip field was obtained by the shooting method and the boundary condition of a mode I crack. Through numerical calculation,it was shown that the near-tip fields are mainly governed by the creep exponent n and Mach number M . When n →∞,the asymptotic solution of a viscoelastic material can be degenerated into that of Freund's elastic-ideally plastic material by analyzing basic equations.     

A method for numerical calculation of propeller hydrodynamics in unsteady inflow

The hydrodynamic performance of a propeller in unsteady inflow was calculated using the surface panel method. The surfaces of blades and hub were discreted by a number of hyperboloidal quadrilateral panels with constant source and doublet distribution. Each panel's corner coordinates were calculated by spline interpolation between the main parameter and the blade geometry of the propeller. The integral equation was derived using the Green Formula. The influence coefficient of the matrix was calculated by the Morino analytic formula. The tangential velocity distribution was calculated with the Yanagizawa method, and the pressure coefficient was calculated using the Bonuli equation. The pressure Kutta condition was satisfied at the trailing edge of the propeller blade using the Newton-Raphson iterative procedure, so as to make the pressure coefficients of the suction and pressure faces of the blade equal at the trailing edge. Calculated results for the propeller in steady inflow were taken as initialization values for the unsteady inflow calculation process. Calculations were carried out from the moment the propeller achieved steady rotation. At each time interval, a linear algebraic equation combined with Kutta condition was established on a key blade and solved numerically. Comparison between calculated results and experimental results indicates that this method is correct and effective.     

Dynamic plastic response of clamped stiffened plates with large deflection

Study on the dynamic response, and especially the nonlinear dynamic response of stiffened plates is complicated by their discontinuity and inhomogeneity. The finite element method （FEM） and the finite strip method are usually adopted in their analysis. Although many useful conclusions have been obtained, the computational cost is enormous. Based on some assumptions, the dynamic plastic response of clamped stiffened plates with large deflections was theoretically investigated herein by a singly symmetric beam model. Firstly, the deflection conditions that a plastic string must satisfy were obtained by the linearized moment-axial force interaction curve for singly symmetric cross sections and the associated plastic flow rule. Secondly, the possible motion mechanisms of the beam under different load intensity were analysed in detail. For structures with plastic deformations, a simplified method was then given that the arbitrary impact load can be replaced equivalently by a rectangular pulse. Finally, to confirm the validity of the proposed method, the dynamic plastic response of a one-way stiffened plate with four fully clamped edges was calculated. The theoretical results were in good agreement with those of FEM. It indicates that the present calculation model is easy and feasible, and the equivalent substitution of load almost has no influence on the final deflection.     

污垢组合对印度玛纳尔湾水域低碳钢腐蚀行为的影响研究(英文)

Corrosion behaviour and biofouling characteristics of mild steel in three different coastal locations in the Gulf of Mannar,India have been studied over a period of 24 months.Oyster fouling was predominant at Open sea-Tuticorin,while barnacle fouling was dominant at both Mandapam and Harbour-Tuticorin.The rate of corrosion for 24 months exposure period was highest at Mandapam,where fouling was minimal.The surface of the mild steel was characterized by etchings&crevices beneath the hard foulers attached on it,at all the test locations.The depth of crevice caused by hard foulers was higher at Open sea-Tuticorin followed by Harbour-Tuticorin and Mandapam.The loss in ultimate tensile strength was more in Open sea-Tuticorin than the other two locations.Corrosion behaviour of mild steel is discussed based on the variation in the biofouling assemblage at the three test locations.     

In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.     

Collision analysis of the spar upper module docking

In order to assess the possible collision effect, a numerical simulation for the upper module and spar platlbrm docking at the speed of 0.2 m/s was conducted by using the software ANSYS/LS-DYNA, and the time history of the collision force, energy absorption and structural defonamtion during the collision was described. The purpose was to ensure that the platlbrm was safely put into operation. Furthermore, this paper analyzes different initial velocities and angles on the Von Mises stress and collision resultant force during the docking collision. The results of this paper showed that the docking could be conducted with higher security. The data in this paper can provide useful references for the determination of the upper module＇s offshore hoisting scheme and practical construction by contrasting the numerical simulation results of the parameters on the docking collision.     

Resistance analysis of unsymmetrical trimaran model with outboard sidehulls configuration

The application of multi-hull ship or trimaran vessel as a mode of transports in both river and sea environments have grown rapidly in recent years.Trimaran vessels are currently of interest for many new high speed ship projects due to the high levels of hydrodynamic efficiency that can be achieved,compared to the mono-hull and catamaran hull forms.The purpose of this study is to identify the possible effects of using an unsymmetrical trimaran ship model with configuration（S/L） 0.1-0.3 and R/L=0.1-0.2.Unsymmetrical trimaran ship model with main dimensions： L=2000mm,B=200 mm and T=45 mm.Experimental methods（towing tank） were performed in the study using speed variations at Froude number 0.1-0.6.The ship model was pulled by an electric motor whose speed could be varied and adjusted.The ship model resistance was measured precisely by using a load cell transducer.The comparison of ship resistance for each configuration with mono-hull was shown on the graph as a function of the total resistance coefficient and Froude number.The test results found that the effective drag reduction could be achieved up to 17% at Fr=0.35 with configuration S/L=0.1.     

作用在双圆柱桩上波浪力准确解和有限差分解的比较

The wave force exerted on vertical piles of offshore structures is the main criterion in designing them.In structures with more than one large pile,the influence of piles on each other is one of the most important issues being concerned in past researches.An efficient method for determining the interaction of piles is introduced in present research.First the wave force is calculated by the exact method using the diffraction theory,then in the finite difference numerical method the force is calculated by adding the velocity potentials of each pile and integration of pressure on their surface.The results showed that the ratio of the wave force on each of the double piles to a single pile has a damped oscillation around unity in which the amplitude of oscillation decreases with the increase in the spacing parameter.Also different wave incident directions and diffraction parameters were used and the results showed that the numerical solution has acceptable accuracy when the diffraction parameter is larger than unity.     

浅水短波Degasperis-Procesi方程的环形孤立波解(英文)

An analytic method, i.e. the homotopy analysis method, was applied for constructing the solutions of the short waves model equations associated with the Degasperis-Procesi (DP) shallow water waves equation. The explicit analytic solutions of loop soliton governing the propagation of short waves were obtained. By means of the transformation of independent variables, an analysis one-loop soliton solution expressed by a series of exponential functions was obtained, which agreed well with the exact solution. The results reveal the validity and great potential of the homotopy analysis method in solving complicated solitary water wave problems.     

Numerical simulation of viscous liquid sloshing by moving-particle semi-implicit method

A meshless numerical simulation method,the moving-particle semi-implicit method(MPS)is presented in this paper to study the sloshing phenomenon in ocean and naval engineering.As a meshless method,MPS uses particles to replace the mesh in traditional methods,the governing equations are discretized by virtue of the relationship of particles,and the Poisson equation of pressure is solved by incomplete Cholesky conjugate gradient method(ICCG),the free surface is tracked by the change of numerical density.A numerical experiment of viscous liquid sloshing tank was presented and compared with the result got by the difference method with the VOF,and an additional modification step was added to make the simulation more stable.The results show that the MPS method is suitable for the simulation of viscous liquid sloshing,with the advantage in arranging the particles easily,especially on some complex curved surface.     

Numerical simulation of viscous liquid sloshing by moving-particle semi-implicit method

A meshless numerical simulation method, the moving-particle semi-implicit method （MPS） is presented in this paper to study the sloshing phenomenon in ocean and naval engineering. As a meshless method, MPS uses particles to replace the mesh in traditional methods, the governing equations are discretized by virtue of the relationship of particles, and the Poisson equation of pressure is solved by incomplete Cholesky conjugate gradient method （ICCG）, the free surface is tracked by the change of numerical density. A numerical experiment of viscous liquid sloshing tank was presented and compared with the result got by the difference method with the VOF, and an additional modification step was added to make the simulation more stable. The results show that the MPS method is suitable for the simulation of viscous liquid sloshing, with the advantage in arranging the particles easily, especially on some complex curved surface.     

Experimental and numerical procedures of a sonar platform with a sound absorption wedge

Experiments involving a sonar platform with a sound absorption wedge were carried out for the purpose of obtaining the low frequency acoustic characteristics. Acoustic characteristics of a sonar platform model with a sound absorption wedge were measured, and the effects of different wedge laid areas on platform acoustic characteristic were tested. Vibration acceleration and self-noise caused by model vibration were measured in four conditions: 0%, 36%, 60%, and 100% of wedge laid area when the sonar platform was under a single frequency excitation force. An experiment was performed to validate a corresponding numerical calculation. The numerical vibration characteristics of platform area were calculated by the finite element method, and self-noise caused by the vibration in it was predicted by an experiential formula. The conclusions prove that the numerical calculation method can partially replace the experimental process for obtaining vibration and sound characteristics.     

A three-dimensional, wave-current coupled, sediment transport model for POM

In the high-energy environment of coastal seas and estuaries,strong sediment resuspension/ deposition events are driven by surface waves,tides,winds and buoyancy driven currents.In recent years,A POM based three-dimensional,wave-current coupled,sediment transport model has been developed by the University of New South Wales.This paper presents several examples of the model applications to study sediment dynamics in the environments where forcings such as waves,tides,and winds are equally important to affect sediment fluxes and distributions.Firstly,the sediment transport model coupled to the Yellow Sea general circulation model and a third generation wave model SWAN was implemented in the Yellow Sea to study the dynamics of the sediment transport and resuspension in the northern Jiangsu shoal-wate(rNJSW).The sediment distributions and fluxes and their inter-annual variability were studied by realistic numerical simulations.The study found that the surface waves played a dominant role over the tides to form the turbidity maxima along the muddy coast of NJSW. Secondly,the sediment transport model was used to explore the effect of suspended sediment-induced stratification in the bottom boundary laye(rBBL).The model uses a re-parameterized bottom drag coefficient Cd that incorporates a linear stability function of flux Richardson number Rf.The study has shown that the sediment induced stratification in the BBL reduces the vertical eddy viscosity and bottom shear stress in comparison with the model prediction in a neutrally stratified BBL.In response to these apparent reductions,the tidal current shear is increased and sediments are abnormally concentrated within a thin wall layer that is overlain by a thicker layer with much smaller concentration.The formation of this fluid-mud layer near the seabed has led to a significant reduction in the total sediment transport.This study contributes to the understanding of formations of tidal flats along the coasts of turbid seas and estuaries.     

多种激励耦合作用下的二维液舱晃荡(英文)

In this research,liquid sloshing behavior in a 2-D rectangular tank was simulated using ANSYS-FLUENT software subject to single or multiple-coupled external excitations(such as sway coupled with roll,and sway and roll coupled with heave).The volume of fluid(VOF) method was used to track the free surface of sloshing.External excitation was imposed through the motion of the tank by using the dynamic mesh technique.The study shows that if the tank is subjected to multiple coupled excitations and resonant excitation frequencies,liquid sloshing will become violent and sloshing loads,including impact on the top wall,will be intensified.     

浮式海上风力机运动性能和锚泊系统(英文)

The development of offshore wind farms was originally carried out in shallow water areas with fixed(seabed mounted) structures.However,countries with limited shallow water areas require innovative floating platforms to deploy wind turbines offshore in order to harness wind energy to generate electricity in deep seas.The performances of motion and mooring system dynamics are vital to designing a cost effective and durable floating platform.This paper describes a numerical model to simulate dynamic behavior of a new semi-submersible type floating offshore wind turbine(FOWT) system.The wind turbine was modeled as a wind block with a certain thrust coefficient,and the hydrodynamics and mooring system dynamics of the platform were calculated by SESAM software.The effect of change in environmental conditions on the dynamic response of the system under wave and wind loading was examined.The results indicate that the semi-submersible concept has excellent performance and SESAM could be an effective tool for floating wind turbine design and analysis.     

基于改进的Logvinovich法对带横摇运动非对称楔形体入水砰击力的计算(英文)

The water entry problem of an asymmetric wedge with roll motion was analyzed by the method of a modified Logvinovich model (MLM). The MLM is a kind of analytical model based on the Wagner method, which linearizes the free surface condition and body boundary condition. The difference is that the MLM applies a nonlinear Bernoulli equation to obtain pressure distribution, which has been proven to be helpful to enhance the accuracy of hydrodynamic loads. The Wagner condition in this paper was generalized to solve the problem of the water entry of a wedge body with rotational velocity. The comparison of wet width between the MLM and a fully nonlinear numerical approach was given, and they agree well with each other. The effect of angular velocity on the hydrodynamic loads of a wedge body was investigated.     

Course-keeping control of underactuated hovercraft

The course-keeping control of underactuated hovercraft with two aft propellers was considered. The control of the heading error and cross-track error was accomplished by the yaw torque merely in this case. The hovercraft dynamic model is nonlinear and underactuated. At first the Controllability of course-keeping control for hovercraft was proved, then a course-keeping control law was derived that keeps hovercraft heading constant as well as minimizes the lateral movement of hovercraft. The proposed law guarantees heading error and sway error all converge to zero exponentially. Simulation tests were carried out to illustrate the effectiveness of the proposed control law. For further research, the disturbance influence would be considered in the dynamic equations.     

二维冲箱式造波机的间隙和形状效应数值研究（英文）

The installation of plunger-type wave makers in experimental tanks will generally include a gap between the back of the wedge and the wall of the tank. In this study, we analyze the influence of this gap on the wave making performance of the plunger using two-dimensional(2 D) CFD calculations for a range of nearly linear wave conditions and compare the results with both experimental measurements and linear potential flow theory. Three wedge-shaped profiles, all with the same submerged volume, are considered. Moreover, the generated waves are compared with the predictions of linear potential flow theory. The calculations are made using the commercial ANSYS FLUENT finite-volume code with dynamic meshes to solve the Navier–Stokes equations and the volume of fluid scheme to capture the air–water interface. Furthermore, the linear potential flow solution of Wu(J Hydraul Res 26:481–493, 1988) is extended to consider an arbitrary profile and serve as a reference solution. The amplitude ratios of the generated waves predicted by the CFD calculations compare well with the predictions of linear potential flow theory for a simple wedge, indicating that viscous effects do not influence this ratio for small-amplitude motions in 2 D. By contrast,significant higher harmonic components are produced by larger amplitude motions. Also, the simple wedge is found to produce the smallest spurious higher harmonic content in the far-field wave.     

风机塔架与叶片相互作用的数值模拟(英文)

Numerical simulations of wind turbine blade-tower interaction by using the open source OpenFOAM tools coupled with arbitrary mesh interface(AMI) method were presented.The governing equations were the unsteady Reynolds-averaged Navier-Stokes(RANS) which were solved by the pimpleDyMFoam solver,and the AMI method was employed to handle mesh movements.The National Renewable Energy Laboratory(NREL) phase VI wind turbine in upwind configuration was selected for numerical tests with different incoming wind speeds(5,10,15,and 25 m/s) at a fixed blade pitch and constant rotational speed.Detailed numerical results of vortex structure,time histories of thrust,and pressure distribution on the blade and tower were presented.The findings show that the wind turbine tower has little effect on the whole aerodynamic performance of an upwind wind turbine,while the rotating rotor will induce an obvious cyclic drop in the front pressure of the tower.Also,strong interaction of blade tip vortices with separation from the tower was observed.