共查询到18条相似文献,搜索用时 406 毫秒
1.
利用轮胎模态参数模型对稳态工况下的轮胎滚动阻力进行模拟.计算了不同胎面阻尼下的滚动阻力,所得结果与实际的趋势相符,数值合理.对不同半径转鼓下轮胎滚动阻力的模拟结果与按ISO 181964推荐的公式计算的结果有良好的一致性.表明了该轮胎模型的合理性. 相似文献
2.
3.
轮胎滚动速度效应对轮胎侧偏动特性的影响 总被引:2,自引:0,他引:2
在利用试验模态参数建立轮胎侧偏非稳态模型基础上,本文重点分析了轮胎滚动速度效应对侧偏动特性的影响。解析模型计算结构的变化趋势和文献的试验研究结果一致。表明计入轮胎滚动所带来的速度对侧偏动特性的影响是不可忽略的,它会对不同速度下行驶汽车的操稳性及横向振动产生影响。滚动速度效应对轮胎侧偏特性影响的成功建械表明了利用模态参数对轮胎建模的优越性。 相似文献
4.
5.
台试与路试轮胎滚动阻力关联性研究 总被引:2,自引:0,他引:2
分析了台试与路试轮胎滚动阻力影响因素的内在联系;建立了台试与路试轮胎滚动阻力关联性模型;揭示了台试与路试轮胎滚动阻力之间的差异;解决了通过台试试验求解道路滚动阻力问题。 相似文献
6.
论文首先分析了台试与路试轮胎滚动阻力影响因素的内在联系,然后建立了台试与路试轮胎滚动阻力关联性模型,揭示了台试与路试轮胎滚动阻力之间的差异,解决了通过台试试验求解道路滚动阻力的问题。 相似文献
7.
8.
9.
10.
11.
汽车轮胎滚动阻力试验机测试方法分析 总被引:1,自引:0,他引:1
为了对汽车轮胎滚动阻力测试方案的可行性进行预先评估,基于检测设备的结构模型,提出了一种运用位移量对轮胎滚动阻力进行仿真分析的新方法。在简述滚动阻力有限元测试模型构建过程的基础上,通过改变轮胎的外部使用参数,分析传感器板在不同工况下位移场的分布情况,制定了设备的测试方案。以传感器的安装位置作为目标检测点,建立轮胎滚动阻力位移场与控制参数之间的关系曲线。最后将采集的数据经过平均滤波处理,与实验室的实测数据进行了趋势性对比。结果表明:采用该测试方法,轮胎滚动阻力随着轮胎负载和速度的增加而增大,随着气压的变大而减小;仿真结果和试验数据在相同工况下的变化趋势基本一致;该测试方法合理、可行。 相似文献
12.
In-plane Dynamics of Tires on the Road Based on an Experimentally Verified Rolling Ring Model 总被引:3,自引:0,他引:3
Shyh-Chin HUANG Associate Professor Chen-Kai SU Graduate Student 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1992,21(1):247-267
The dynamic behavior of tires rolling on the road is predicted based on a ring model that is experimentally verified to well represent a real tire. The road contact is kinematically represented by two displacement constraints, one in radial and one in tangential direction. The displacement constraints are enforced via the receptance theory. The receptance matrix developed for the rolling tire is found to be Hermitian. Numerical results show that the natural (or eigen-) frequencies of the rolling tire with road contact are, as expected, higher than those of the tire with no contact. The influence of the rotating speed to the eigen-frquencies of the tire is also shown. Analytic expressions for the mode shapes of a rolling tire with ground contact are derived. 相似文献
13.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(1):247-267
SUMMARY The dynamic behavior of tires rolling on the road is predicted based on a ring model that is experimentally verified to well represent a real tire. The road contact is kinematically represented by two displacement constraints, one in radial and one in tangential direction. The displacement constraints are enforced via the receptance theory. The receptance matrix developed for the rolling tire is found to be Hermitian. Numerical results show that the natural (or eigen-) frequencies of the rolling tire with road contact are, as expected, higher than those of the tire with no contact. The influence of the rotating speed to the eigen-frquencies of the tire is also shown. Analytic expressions for the mode shapes of a rolling tire with ground contact are derived. 相似文献
14.
H. W. Lee J. R. Cho W. B. Jeong K. M. Jeong K. W. Kim 《International Journal of Automotive Technology》2014,15(3):411-417
This paper is concerned with the numerical prediction of the hysteretic loss-induced rolling resistance of 3-D periodic patterned tire. Elastomeric rubber compounds of rolling tire exhibit the hysteretic loss owing to the phase difference between stress- and strain-time responses. By virtue of this physical characteristic, the rolling resistance is considered as a pseudo-force resisting the tire rolling. The 3-D periodic patterned tire model is constructed by copying an 1-sector mesh in the circumferential direction, and strain cycles of each strain component are approximated by 3-D static tire contact analysis. According to the principal value of half strain amplitudes, the hysteretic loss is calculated in terms of the amplitude of the maximum principal strain and the loss modulus of rubber compound. The numerical results of 3-D periodic patterned tire are justified with the experimental data and compared with those of 3-D smooth tire. 相似文献
15.
16.
Jin Shang Dihua Guan L. H. Yam 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2002,37(2):129-144
Based on the modeling of tire vertical characteristics and steady cornering properties, the model of tire nonsteady cornering is established in this paper using tire modal parameters extracted experimentally. In order to consider the influence of tire rolling effect on its cornering properties, the induced transfer function is introduced. The analytical formulae for calculation of transfer-function of lateral force and self-aligning torque with respect to lateral displacement and yaw angle are derived. The nonsteady cornering characteristics of tire under different loads can be calculated. The results of calculation are consistent with the experimental ones in the literature. The influence of rolling speed on tire cornering properties including the static case is analyzed. The nonsteady cornering properties in high frequency range are given by the model. The study demonstrates the consistency between steady and nonsteady tire modeling by using modal parameters. 相似文献
17.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(2):129-144
Based on the modeling of tire vertical characteristics and steady cornering properties, the model of tire nonsteady cornering is established in this paper using tire modal parameters extracted experimentally. In order to consider the influence of tire rolling effect on its cornering properties, the induced transfer function is introduced. The analytical formulae for calculation of transfer-function of lateral force and self-aligning torque with respect to lateral displacement and yaw angle are derived. The nonsteady cornering characteristics of tire under different loads can be calculated. The results of calculation are consistent with the experimental ones in the literature. The influence of rolling speed on tire cornering properties including the static case is analyzed. The nonsteady cornering properties in high frequency range are given by the model. The study demonstrates the consistency between steady and nonsteady tire modeling by using modal parameters. 相似文献
18.
J. Yang G. L. Wang Z. J. Wan C. Liang H. C. Zhou 《International Journal of Automotive Technology》2016,17(4):639-649
Two types of radial tire 11.00R20 and 385/65R22.5 are chosen as the research objects, and their carcass contours are redesigned by using Sakai Hideo’s, Frank’s and the new non-natural equilibrium contour design theories, which were based on analyzing the current non-equilibrium contour design theories of radial tire. Then the tire wear, rolling resistance and grip performance of the two radial tires designed by different non-natural equilibrium contour design theories are comprehensively analyzed with the finite element software ABAQUS. The results show that Frank’s contour design theory can reduce tire wear; the new non-natural equilibrium contour design theory can enhance tire wear, rolling resistance performance, etc. It is also found that the tire carcass contour has great influence on tire performance, especially on the tire rolling resistance. The new non-natural equilibrium contour theory provides a guidance to reduce the tire rolling resistance, and it can break through the target conflicts in tire performance. The tire with the new non-natural equilibrium carcass contour can enhance its comprehensive performance. 相似文献