共查询到17条相似文献,搜索用时 453 毫秒
1.
发动机主动控制悬置是解决提高环保性能、降低燃耗要求与降低汽车振动噪声、满足发动机高水平振动控制的要求之间冲突的重要途径.本文主要就发动机主动控制的基本理论依据以及常用的主动控制悬置技术进行了论述,并指出发动机主动控制悬置是未来发动机悬置的主要研究方向. 相似文献
2.
3.
4.
5.
发动机悬置又称作发动机支承,它的主要作用是将发动机柔性地支承在车身(或底盘)上,以减少发动机传给车身的振动和噪声。近年来,随着主动控制式发动机悬置的采用,可以说发动机悬置装置有了新的发展。 一、弹性元件式发动机悬置(图1) 相似文献
6.
7.
8.
9.
广州本田雅阁轿车在行驶过程中,发动机通过前、后侧支架和与其固连在一起的自动变速器支架以四点式支撑在车身上。为了减少发动机传给车身的振动,减少汽车在不平道路上行驶时因车身的弹性变形对发动机产生的应力,同时为了防止汽车在加速和制动时,发动机由于弹性元件的变形而产生纵向位移,该车发动机的安装支架采用了电子控制装置。该装置主要由发动机支架控制电磁阀、动力系统控制模块(PCM)和后支架等组成。 相似文献
10.
11.
12.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(3):193-216
This paper presents vibration control of a passenger vehicle using an electronically controllable electro-rheological (ER) engine mount. A mixed-mode ER engine mount operating under the flow and shear modes is devised and manufactured. After establishing the dynamic model of the proposed ER engine mount, both field-dependent displacement transmissibility and dynamic stiffness of the ER engine mount are empirically evaluated. The ER engine mount is then incorporated with a full-vehicle model in order to investigate vibration control performance at the driver's seat position. The governing equation of motion of the full-vehicle model is formulated by considering engine excitation force, followed by designing a skyhook controller to attenuate unwanted vibration. The controller is implemented through a hardware-in-the-loop simulation (HILS), and control responses such as acceleration level at idle speed are evaluated in the frequency and time domains. 相似文献
13.
Seung-Bok S. Choi Hyun-Jeong H. Song 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2002,37(3):193-216
This paper presents vibration control of a passenger vehicle using an electronically controllable electro-rheological (ER) engine mount. A mixed-mode ER engine mount operating under the flow and shear modes is devised and manufactured. After establishing the dynamic model of the proposed ER engine mount, both field-dependent displacement transmissibility and dynamic stiffness of the ER engine mount are empirically evaluated. The ER engine mount is then incorporated with a full-vehicle model in order to investigate vibration control performance at the driver's seat position. The governing equation of motion of the full-vehicle model is formulated by considering engine excitation force, followed by designing a skyhook controller to attenuate unwanted vibration. The controller is implemented through a hardware-in-the-loop simulation (HILS), and control responses such as acceleration level at idle speed are evaluated in the frequency and time domains. 相似文献
14.
振动主动控制技术具有减振效率高,有效减振频率范围度,反应敏捷等优点,在机械振动领域具有广泛的应用前景。在一台四缸柴油机上进行振动主动控制的研究,使用主动控制技术控制动力吸振式的频率,使其能足够发动机的主动振动频率,并保持最佳状态,从而有效地抑制发动机的振动。 相似文献
15.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(5):721-736
This work introduces a new concept in designing semi-active engine mounts. Engine mounts are under continuous development to provide better and more cost-effective engine vibration control. Passive engine mounts do not provide satisfactory solution. Available semi-active and active mounts provide better solutions but they are more complex and expensive. The variable stiffness engine mount (VSEM) is a semi-active engine mount with a simple ON–OFF control strategy. However, unlike available semi-active engine mounts that work based on damping change, the VSEM works based on the static stiffness change by using a new fast response force controlled variable spring. The VSEM is an improved version of the vibration mount introduced by the authors in their previous work. The results showed significant performance improvements over a passive rubber mount. The VSEM also provides better vibration control than a hydromount at idle speed. Low hysteresis and the ability to be modelled by a linear model in low-frequency are the advantages of the VSEM over the vibration isolator introduced earlier and available hydromounts. These specifications facilitate the use of VSEM in the automotive industry, however, further evaluation and developments are needed for this purpose. 相似文献
16.