Dynamic transit scheduling under efficiency constraints

The problem of dynamic transit scheduling is addressed, and a method for transient and steady-state solutions is developed. The dynamic demand-supply formulation employed is based on previously calibrated disaggregate demand specifications. The existence and feasibility of solutions are examined, and stability conditions are derived. Numerical examples for both urban and rural conditions are given. The new methodology does not require time-series endogenous data but only initial conditions to provide long- or short-term scheduling plans. Futhermore, it takes into account passenger demand fluctuations and explicitly deals with management responsiveness and time lags in implementing scheduling decisions. Owing to its dynamic nature the methodology can be used as a design tool in transit scheduling and for assessing the effects of time-varying exogenous events such as gasoline price fluctuations, transport budget restrictions and other contingencies.     

A multi-objective train scheduling model and solution

This paper develops a multi-objective optimization model for the passenger train-scheduling problem on a railroad network which includes single and multiple tracks, as well as multiple platforms with different train capacities. In this study, lowering the fuel consumption cost is the measure of satisfaction of the railway company and shortening the total passenger-time is being regarded as the passenger satisfaction criterion. The solution of the problem consists of two steps. First the Pareto frontier is determined using the -constraint method, and second, based on the obtained Pareto frontier detailed multi-objective optimization is performed using the distance-based method with three types of distances. Numerical examples are given to illustrate the model and solution methodology.     

Route choice and the value of commuting time: An economic model of dichotomous choice

This paper presents an economic model of generalized travel cost and provides an empirical study of the parameters of the cost function. The route-choice model that is estimated combines McFadden's theory of qualitative choice behavior with a function for the value of travel time in which total trip time and the income level are assumed to influence the marginal value of time. The empirical results indicate that, for a sample of commuters in the Chicago metropolitan area in 1972, the value of time is a positive function of total trip time, but is not a function of income.     

A model and algorithm for multicriteria route-mode choice

Using an idea proposed independently by Quandt and Schneider, the paper declares mode choice to be a special instance of route choice. It describes a (non-logit) model which includes in its route-choice mechanism the decision variables traditionally associated with mode choice. With the assumption that each traveller selects the route which minimizes his own personal linear choice function, it is clear that the routes with a nonzero chance of being picked are only those not dominated by any other path (e.g. are not both costlier and longer than any other path). The precise probability of a route being chosen is just the integral over the appropriate portion of the probability density of the coefficients of the choice function. The integration limits are implied by the amount of each disutility on each of the undominated routes. An algorithm is given which is quite efficient in finding these paths in a large and complex multimodal network.     

A bi-objective cyclist route choice model

It is widely acknowledged that cyclists choose their route differently to drivers of private vehicles. The route choice decision of commuter drivers is often modelled with one objective, to reduce their generalised travel cost, which is a monetary value representing the combined travel time and vehicle operating cost. Commuter cyclists, on the other hand, usually have multiple incommensurable objectives when choosing their route: the travel time and the suitability of a route. By suitability we mean non-subjective factors that characterise the suitability of a route for cycling, including safety, traffic volumes, traffic speeds, presence of bicycle lanes, whether the terrain is flat or hilly, etc. While these incommensurable objectives are difficult to be combined into a single objective, it is also important to take into account that each individual cyclist may prioritise differently between travel time and suitability when they choose a route.This paper proposes a novel model to determine the route choice set of commuter cyclists by formulating a bi-objective routing problem. The two objectives considered are travel time and suitability of a route for cycling. Rather than determining a single route for a cyclist, we determine a choice set of optimal alternative routes (efficient routes) from which a cyclist may select one according to their personal preference depending on their perception of travel time versus other route choice criteria considered in the suitability index. This method is then implemented in a case study in Auckland, New Zealand.The study provides a starting point for the trip assignment of cyclists, and with further research, the bi-objective routing model developed can be applied to create a complete travel demand forecast model for cycle trips. We also suggest the application of the developed methodology as an algorithm in an interactive route finder to suggest efficient route choices at different levels of suitability to cyclists and potential cyclists.     

Development and validation of a direct mode choice model

A direct discrete mode choice model is introduced using relative attributes of competing modes as well as socioeconomic characteristics of travelers. The model is calibrated and validated for two available historic databases in the Dallas–Fort Worth region. The validation is conducted against the outputs of a current nested logit model used by the regional planning organization as well as the observed values based on transit ridership surveys for a newly inaugurated commuter rail service. The calibrated model is applied after the introduction of this new transit mode. The results show that the estimated mode shares by the proposed model have a statistically better consistency with the observed values than the estimates of the conventional nested logit model. Unlike the logit model, the structure of the direct model based on relative attributes also has the advantage of not needing recalibration each time a new travel mode is introduced. The model is found to be easier to calibrate and produces more accurate results than the nested logit model, commonly used by many metropolitan planning organizations.     

A tour-based model of travel mode choice

This paper presents a new tour-based mode choice model. The model is agent-based: both households and individuals are modelled within an object-oriented, microsimulation framework. The model is household-based in that inter-personal household constraints on vehicle usage are modelled, and the auto passenger mode is modelled as a joint decision between the driver and the passenger(s) to ride-share. Decisions are modelled using a random utility framework. Utility signals are used to communicate preferences among the agents and to make trade-offs among competing demands. Each person is assumed to choose the best combination of modes available to execute each tour, subject to auto availability constraints that are determined at the household level. The households allocations of resources (i.e., cars to drivers and drivers to ride-sharing passengers) are based on maximizing overall household utility, subject to current household resource levels. The model is activity-based: it is designed for integration within a household-based activity scheduling microsimulator. The model is both chain-based and trip-based. It is trip-based in that the ultimate output of the model is a chosen, feasible travel mode for each trip in the simulation. These trip modes are, however, determined through a chain-based analysis. A key organizing principle in the model is that if a car is to be used on a tour, it must be used for the entire chain, since the car must be returned home at the end of the tour. No such constraint, however, exists with respect to other modes such as walk and transit. The paper presents the full conceptual model and estimation results for an initial empirical prototype. Because of the complex nature of the model decision structure, choice probabilities are simulated from direct generation of random utilities rather than through an analytical probability expression.     

A non-compensatory choice model incorporating attribute cutoffs

This research proposes an extension to the traditional compensatory utility maximization framework which has guided most theoretical and statistical work in choice modeling applications, including those in transportation demand estimation work. Attribute cutoffs are incorporated into the decision problem formulation; it is then argued on extant empirical evidence that individuals may view these constraints as “soft”. This leads to the formulation of a penalized utility function that allows for constraint violation, but at a cost to the overall evaluation of the good. The proposed model is able to represent fully compensatory, conjunctive and disjunctive choice strategies, as well as combinations thereof. The properties of the proposed theoretical model are examined and discussed. From the theoretical framework, statistical models of choice behavior are easily derived; in their simplest forms, these models can be estimated using existing software. A Stated Preference choice experiment is analyzed using the proposed model, which is found to be highly consistent with observed choices and superior to a structural two-stage choice set formation model.     

A Stated preference freight mode choice model

Transport policy aims to assist the transport system to work more efficiently and effectively. An understanding of the reasons why people choose to move freight in a certain manner is critical to the development of appropriate policies. This article outlines a data collection approach and the development of a disaggregate mode choice model applicable to the analysis of freight shipper decision making. It focuses on the choice between rail and road in Java, Indonesia. The model indicates that safety, reliability and responsiveness are major attributes influencing rail/road freight mode choice. Transport policies aimed at improving these dimensions should increase the attractiveness of rail transport.     

A reference-dependent user equilibrium model for activity-travel scheduling

Existing user equilibrium models of activity-travel scheduling generally fall short in representing travelers’ decision-making processes. The majority have either implicitly or explicitly assumed that travelers follow the principle of utility maximization. This assumption ignores the fact that individuals may be loss–averse when making activity-travel decisions. Allowing for the situation that travelers possess accurate information of the urban-transportation system due to modern technologies, studies on reference-dependent decision-making under near-perfect information are receiving increasing attention. In view of traveler heterogeneity, individuals can be divided into multiple classes according to their reference points. In this paper, we propose a reference-dependent multi-class user equilibrium model for activity-travel scheduling, which can be reformulated as a variational inequality problem. Moreover, comparative analyses are conducted on the equilibrium states between utility-maximization (no reference) and reference-dependency of exogenous and endogenous references. A numerical example regarding combined departure-time and mode choice for commuting is conducted to illustrate the proposed model. The simulated results indicate that reference points and loss aversion attitudes have significant effects on the choice of departure time and mode.     

A simultaneous destination and mode choice model for shopping trips

This paper describes a disaggregate simultaneous destination and mode choice model for shopping trips. Following an introduction to the model structure and a review of the data, the results of five different model specifications are discussed. The models were estimated using data from two communities adjacent to Eindhoven, the Netherlands and utilise the multinomial logit model.     

A behavioral choice model of the use of car-sharing and ride-sourcing services

There are a number of disruptive mobility services that are increasingly finding their way into the marketplace. Two key examples of such services are car-sharing services and ride-sourcing services. In an effort to better understand the influence of various exogenous socio-economic and demographic variables on the frequency of use of ride-sourcing and car-sharing services, this paper presents a bivariate ordered probit model estimated on a survey data set derived from the 2014–2015 Puget Sound Regional Travel Study. Model estimation results show that users of these services tend to be young, well-educated, higher-income, working individuals residing in higher-density areas. There are significant interaction effects reflecting the influence of children and the built environment on disruptive mobility service usage. The model developed in this paper provides key insights into factors affecting market penetration of these services, and can be integrated in larger travel forecasting model systems to better predict the adoption and use of mobility-on-demand services.     

A utility-based bicycle speed choice model with time and energy factors

Transportation - This paper presents a utility-based behavioral model of bicycle speed choice. A mathematical framework is developed with travel time, energy expenditure, and control factors....     

Hierarchical ordering of nests in a joint mode and destination choice model

This paper seeks to explore the relationship between mode and destination choice in an integrated nested choice model. A fundamental argument can be made that in certain circumstances, the ordering of choices should be reversed from the usual sequence of destination choice preceding mode choice. This results in a travel demand model where travelers are more likely to change destinations than to change transportation modes. For small and medium size urban areas, particularly in the United States, with less well developed public transit systems that draw few choice riders, this assumption makes much more sense than the traditional modeling assumptions. The models used in the new travel modeling system developed for Knoxville, Tennessee utilize this reversed ordering, with generally good results, which required no external tinkering in the logsum parameters.     

A flexible model structure approach for discrete choice models

Multi-dimensional discrete choice problems are usually estimated by assuming a single-choice hierarchical order for the entire study population or for pre-defined segments representing the behavior of an “average” person and by indicating either limited differences or a variety in choices among the study population. This study develops an integral methodological framework, termed the flexible model structure (FMS), which enhances the application of the discrete choice model by developing an optimization algorithm that segment given data and searches for the best model structure for each segment simultaneously. The approach is demonstrated here through three models that conceptualize the multi-dimensional discrete choice problem. The first two are Nested Logit models with a two-choice dimension of destination and mode; they represent the estimation of a fixed-structure model using pre-segmented data as is mostly common in multi-dimensional discrete choice model implementation. The third model, the FMS, includes a fuzzy segmentation method with weighted variables, as well as a combination of more than one model structure estimated simultaneously. The FMS model significantly improves estimation results, using fewer variables than do segmented NL models, thus supporting the hypothesis that different model structures may best describe the behavior of different groups of people in multi-dimensional choice models. The implementation of FMS involves presenting the travel behavior of an individual as a mix of travel behaviors represented by a number of segments. The choice model for each segment comprises a combination of different choice model structures. The FMS model thus breaks the consensus that an individual belongs to only one segment and that a segment can take only one structure.     

Microscopic pedestrian simulation model combined with a tactical model for route choice behaviour

This study proposes a microscopic pedestrian simulation model for evaluating pedestrian flow. Recently, several pedestrian models have been proposed to evaluate pedestrian flow in crowded situations for the purpose of designing facilities. However, current pedestrian simulation models do not explain the negotiation process of collision avoidance between pedestrians, which can be important for representing pedestrian behaviour in congested situations. This study builds a microscopic model of pedestrian behaviour using a two-player game and assuming that pedestrians anticipate movements of other pedestrians so as to avoid colliding with them. A macroscopic tactical model is also proposed to determine a macroscopic path to a given destination. The results of the simulation model are compared with experimental data and observed data in a railway station. Several characteristics of pedestrian flows such as traffic volume and travel time in multidirectional flows, temporal–spatial collision avoidance behaviour and density distribution in the railway station are reproduced in the simulation.     

Park-and-ride lot choice model using random utility maximization and random regret minimization

This research aims to understand the park-and-ride (PNR) lot choice behaviour of users i.e., why PNR user choose one PNR lot versus another. Multinomial logit models are developed, the first based on the random utility maximization (RUM) concept where users are assumed to choose alternatives that have maximum utility, and the second based on the random regret minimization (RRM) concept where users are assumed to make decisions such that they minimize the regret in comparison to other foregone alternatives. A PNR trip is completed in two networks, the auto network and the transit network. The travel time of users for both the auto network and the transit network are used to create variables in the model. For the auto network, travel time is obtained using information from the strategic transport network using EMME/4 software, whereas travel time for the transit network is calculated using Google’s general transit feed specification data using a backward time-dependent shortest path algorithm. The involvement of two different networks in a PNR trip causes a trade-off relation within the PNR lot choice mechanism, and it is anticipated that an RRM model that captures this compromise effect may outperform typical RUM models. We use two forms of RRM models; the classical RRM and µRRM. Our results not only confirm a decade-old understanding that the RRM model may be an alternative concept to model transport choices, but also strengthen this understanding by exploring differences between two models in terms of model fit and out-of-sample predictive abilities. Further, our work is one of the few that estimates an RRM model on revealed preference data.

     

Vulnerability evaluation of freight railway networks using a heuristic routing and scheduling optimization model

Transportation - Railway network is an integral part of the economy of many countries. Identifying critical network elements can help network executives to take appropriate preventive actions...     

A model for multi-class road network recovery scheduling of regional road networks

Transportation - In this paper, an optimisation model for recovery planning of road networks is presented in which both social and economic resilience is aimed to be achieved. The model is...     

Integrating parking behaviour in activity-based travel demand modelling: Investigation of the relationship between parking type choice and activity scheduling process

Traditionally, the parking choice/option is considered to be an important factor in only in the mode choice component of a four-stage travel demand modelling system. However, travel demand modelling has been undergoing a paradigm shift from the traditional trip-based approach to an activity-based approach. The activity-based approach is intended to capture the influences of different policy variables at various stages of activity-travel decision making processes. Parking is a key policy variable that captures land use and transportation interactions in urban areas. It is important that the influences of parking choice on activity scheduling behaviour be identified fully. This paper investigates this issue using a sample data set collected in Montreal, Canada. Parking type choice and activity scheduling decision (start time choice) are modelled jointly in order to identify the effects of parking type choice on activity scheduling behaviour. Empirical investigation gives strong evidence that parking type choice influences activity scheduling process. The empirical findings of this investigation challenge the validity of the traditional conception which considers parking choice as exogenous variable only in the mode choice component of travel demand models.