共查询到20条相似文献,搜索用时 203 毫秒
1.
2.
介绍东海大桥主航道斜拉桥钢-混凝土箱形结合梁的钢结构部分、混凝土桥面板、钢-混凝土结合部位在海洋环境下耐久性设计特点及采用方案。 相似文献
3.
4.
舟山市富翅门大桥岑港侧主航道桥边跨变截面钢混结合梁大部分位于响礁门水域滩涂区,无法选用桥面吊机对称悬臂吊装,采用变截面钢混结合梁支架滑移安装施工工艺。通过对滑移支架设计、液压同步移梁技术、钢主梁转换落梁和现浇混凝土桥面板等重难点问题进行分析,总结施工经验,可为类似钢混结合梁施工提供借鉴。 相似文献
5.
该文主要介绍了液压同步整体提升技术在广州新光大桥拱肋提升过程中的应用,并就主拱中段的提升来说明大节段整体提升施工,阐述了数控液压连续千斤顶整体提升施工工艺、提升过程中的设备布置、提升控制方案。 相似文献
6.
7.
8.
9.
《公路》2021,66(8):142-147
襄阳庞公大桥主桥为2×378m三塔两跨悬索桥,两主跨关于中塔对称布置。加劲梁采用钢-混凝土结合梁结构,由钢梁通过剪力钉与混凝土桥面板结合而成。全桥共分为84个节段。加劲梁采用梁段内桥面板与钢梁厂内结合、梁段间桥面板放置于已结合桥面板上进行整体吊装的思路。两主跨各布置两台300t液压提升式缆载吊机分节段起吊架设,由跨中向边塔同步对称进行,其中最大节段吊重约260t。受塔区无吊索、地形限制、梁段发运等影响,现场搭设存梁支架及存梁台座,利用起重船提前进行塔区存梁及场内滑移存梁,对于起重船吊装性能不足梁段采用矮支架存梁+缆载吊机"荡移法"架设。最后,在塔柱两侧采用"预偏+顶推"方式合龙。吊装过程中考虑中塔鞍槽抗滑稳定性及塔底应力情况,进行加载控制及索鞍顶推复位。 相似文献
10.
新光大桥边拱肋提升技术 总被引:2,自引:2,他引:0
广州新光大桥拱肋采取大节段同步液压整体提升法施工,这种方法在拱桥建设史上属于首创。经过反复优化施工方案,多方论证关键技术难点,精心合理组织施工队伍,新光大桥边拱肋液压同步整体提升取得圆满成功,为主拱肋提升奠定了坚实的基础,同时为桥梁界同种类型拱肋提升施工提供了一套成熟的施工工艺。 相似文献
11.
12.
通过对正交异性钢箱梁桥面结构作适当简化,用平面刚架结构分析了桥面板的受力,揭示了桥面结构的受力特点,可作为钢箱梁结构设计和结构优化的参考。 相似文献
13.
14.
斯太尔铸钢桥壳摩擦焊接工艺的探讨和应用 总被引:2,自引:0,他引:2
介绍斯太尔铸钢桥壳采用摩擦焊接工艺以及这种工艺的接头设计因素、主要技术参数调试、工艺过程和工艺条件,生产中摩擦焊缝的质量检验和质量控制方法。通过批量生产实践证明,斯太尔铸钢桥壳采用摩擦焊接工艺的生产效率高,产品质量好,焊接性能稳定,成本低。 相似文献
15.
Combined control of a regenerative braking and antilock braking system for hybrid electric vehicles 总被引:1,自引:0,他引:1
D. Peng Y. Zhang C. -L. Yin J. -W. Zhang 《International Journal of Automotive Technology》2008,9(6):749-757
Most parallel hybrid electric vehicles (HEV) employ both a hydraulic braking system and a regenerative braking system to provide
enhanced braking performance and energy regeneration. A new design of a combined braking control strategy (CBCS) is presented
in this paper. The design is based on a new method of HEV braking torque distribution that makes the hydraulic braking system
work together with the regenerative braking system. The control system meets the requirements of a vehicle longitudinal braking
performance and gets more regenerative energy charge back to the battery. In the described system, a logic threshold control
strategy (LTCS) is developed to adjust the hydraulic braking torque dynamically, and a fuzzy logic control strategy (FCS)
is applied to adjust the regenerative braking torque dynamically. With the control strategy, the hydraulic braking system
and the regenerative braking system work synchronously to assure high regenerative efficiency and good braking performance,
even on roads with a low adhesion coefficient when emergency braking is required. The proposed braking control strategy is
steady and effective, as demonstrated by the experiment and the simulation. 相似文献
16.
17.
18.
Wei Liang Jure Medanic Roland Ruhl 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2008,46(3):197-227
Modeling of tire friction is one of the central problems for vehicle control systems design. LuGre-type dynamic tire model has been proposed and well discussed in previous studies, because it offers a compact form of dynamic model that is convenient in advanced control studies. It has been successfully used in tire slip control design and vehicle state estimation problems. In this article, a concept of time-constrained Stribeck effect is introduced to interpret the mechanism of the LuGre friction model in predicting tire friction characteristics. A modified two-dimensional (2D) dynamic LuGre friction model is introduced to make it compatible with the governing theorem in the steady state. An analytical 2D modified LuGre-type dynamic tire model is developed, in which some fundamental limitations of classical LuGre models are eliminated. The main modifications involve a change in the structure of the 2D LuGre friction model, introduction of load-dependent parameters in 1D and 2D tire models, and a changed structure in the distributed parameter model. The proposed model is compared, in the steady state, to both the Magic Formula and the classical LuGre model. It improves model accuracy in the steady state and gives a physically reasonable distribution of the bristle deflection. A first-order lumped parameter (LP) nonlinear model, which has simpler structure than the distributed parameter model and the classical LP LuGre model, is then derived. Numerical simulations show that the proposed LP model has a good estimation for tire transient dynamics. Thus, the proposed model retains the merits of LuGre-type models and improves the agreement with observation and experimental data on friction force distribution along the patch and on the steady-state friction prediction. 相似文献
19.
为便于发动机电控系统更好地融入到整车通讯控制体系中,文章采用PIC18F448型单片机和PCA82C250型芯片,以原有煤层气发动机电控系统为模板,对集成式的CAN总线通讯模块进行了研究,完成了硬件电路和程序的设计;数据收发包括标准帧和扩展帧,均采用中断控制方式实现。指出该CAN模块可作为一个独立的CAN节点使用,为煤层气发动机ECU融入整车控制ECU的通讯体系奠定了基础。 相似文献
20.
以西南地区一座曲线高墩连续刚构特大桥为计算实例,介绍该桥的设计信息,并基于空间有限元分析,介绍该桥0号块产生扭转应力组合情况、各工况下结构最大扭矩值及最不利工况下0号块应力云图,为合理确定0号块的结构设计和构造布置提供可靠依据,并得出连续刚构特大桥0号块扭转应力设计满足相关规范要求的结论。 相似文献