Modeling and solving discrete network design problem with stochastic user equilibrium

In this paper, we address the discrete network design problem, which determines the addition of new roads to existing transportation network to optimize the transportation system performance. Road users are assumed to follow the traffic assignment principle of stochastic user equilibrium. A mixed‐integer nonlinear nonconvex problem is developed to model this discrete network design problem with stochastic user equilibrium. The original problem is relaxed into a convex mixed‐integer nonlinear program, whose solution provides a lower bound of the original problem. The relaxed problem is then embedded into two proposed global optimization solution algorithms to obtain the global optimal solution of the problem. Copyright © 2016 John Wiley & Sons, Ltd.     

Equity based land‐use and transportation problem

Due to additional trip production by land use development, the O‐D travel costs between some O‐D pairs may also change intuitively. This leads to positive and negative impacts on network users traveling between different O‐D pairs. Therefore the equity issue about the benefit distribution gained from the land‐use development problem is raised. This paper proposes an Equity based Land‐Use Transportation Problem (ELUTP) which is intended to examine the benefit distribution among the network users and the resulting equity associated with land‐use development problem in terms of the change of equilibrium O‐D travel cost. In the resulting bi‐level programming model, the upper level sub‐problem maximizes traffic production incorporating equity constraints, while the lower level sub‐problem is a combined trip distribution/assignment user equilibrium problem. Genetic algorithm based method is applied to test the models using an example network.     

A bi‐level programming approach — Optimal transit fare under line capacity constraints

The fare of a transit line is one of the important decision variables for transit network design. It has been advocated as an efficient means of coordinating the transit passenger flows and of alleviating congestion in the transit network. This paper shows how transit fare can be optimized so as to balance the passenger flow on the transit network and to reduce the overload delays of passengers at transit stops. A bi‐level programming method is developed to optimize the transit fare under line capacity constraints. The upper‐level problem seeks to minimize the total network travel time, while the lower‐level problem is a stochastic user equilibrium transit assignment model with line capacity constraints. A heuristic solution algorithm based on sensitivity analysis is proposed. Numerical example is used to illustrate the application of the proposed model and solution algorithm.     

Traffic signal timing problems with environmental and equity considerations

Traffic signal timings in a road network can not only affect total user travel time and total amount of traffic emissions in the network but also create an inequity problem in terms of the change in travel costs of users traveling between different locations. This paper proposes a multi‐objective bi‐level programming model for design of sustainable and equitable traffic signal timings for a congested signal‐controlled road network. The upper level of the proposed model is a multi‐objective programming problem with an equity constraint that maximizes the reserve capacity of the network and minimizes the total amount of traffic emissions. The lower level is a deterministic network user equilibrium problem that considers the vehicle delays at signalized intersections of the network. To solve the proposed model, an approach for normalizing incommensurable objective functions is presented, and a heuristic solution algorithm that combines a penalty function approach and a simulated annealing method is developed. Two numerical examples are presented to show the effects of reserve capacity improvement and green time proportion on network flow distribution and transportation system performance and the importance of incorporating environmental and equity objectives in the traffic signal timing problems. Copyright © 2013 John Wiley & Sons, Ltd.     

Sensitivity analysis on stochastic equilibrium transportation networks using genetic algorithm

This study deals with the sensitivity analysis of an equilibrium transportation networks using genetic algorithm approach and uses the bi‐level iterative sensitivity algorithm. Therefore, integrated Genetic Algorithm‐TRANSYT and Path Flow Estimator (GATPFE) is developed for signalized road networks for various level of perceived travel time in order to test the sensitivity of perceived travel time error in an urban stochastic road networks. Level of information provided to drivers correspondingly affects the signal timing parameters and hence the Stochastic User Equilibrium (SUE) link flows. When the information on road system is increased, the road users try to avoid conflicting links. Therefore, the stochastic equilibrium assignment concept tends to be user equilibrium. The GATPFE is used to solve the bi‐level problem, where the Area Traffic Control (ATC) is the upper‐level and the SUE assignment is the lower‐level. The GATPFE is tested for six‐junction network taken from literature. The results show that the integrated GATPFE can be applied to carry out sensitivity analysis at the equilibrium network design problems for various level of information and it simultaneously optimize the signal timings (i.e. network common cycle time, signal stage and offsets between junctions).     

Network reliability‐based optimal toll design

Optimal toll design from a network reliability point of view is addressed in this paper. Improving network reliability is proposed as a policy objective of road pricing. A reliability‐based optimal toll design model, where on the upper level network performance including travel time reliability is optimized, while on the lower level a dynamic user‐equilibrium is achieved, is presented. Road authorities aim to optimize network travel time reliability by setting tolls in a network design problem. Travelers are influenced by these tolls and make route and trip decisions by considering travel times and tolls. Network performance reliability is analyzed for a degradable network with elastic and fluctuated travel demand, which integrates reliability and uncertainty, dynamic network equilibrium models, and Monte Carlo methods. The proposed model is applied to a small hypothesized network for which optimal tolls are derived. The network travel time reliability is indeed improved after implementing optimal tolling system. Trips may have a somewhat higher, but more reliable, travel time.     

Global optimization method for network design problem with stochastic user equilibrium

In this paper, we consider the continuous road network design problem with stochastic user equilibrium constraint that aims to optimize the network performance via road capacity expansion. The network flow pattern is subject to stochastic user equilibrium, specifically, the logit route choice model. The resulting formulation, a nonlinear nonconvex programming problem, is firstly transformed into a nonlinear program with only logarithmic functions as nonlinear terms, for which a tight linear programming relaxation is derived by using an outer-approximation technique. The linear programming relaxation is then embedded within a global optimization solution algorithm based on range reduction technique, and the proposed approach is proved to converge to a global optimum.     

A stochastic multimodal reliable network design problem under adverse weather conditions

This paper formulates a network design problem (NDP) for finding the optimal public transport service frequencies and link capacity expansions in a multimodal network with consideration of impacts from adverse weather conditions. The proposed NDP aims to minimize the sum of expected total travel time, operational cost of transit services, and construction cost of link capacity expansions under an acceptable level of variance of total travel time. Auto, transit, bus, and walking modes are considered in the multimodal network model for finding the equilibrium flows and travel times. In the proposed network model, demands are assumed to follow Poisson distribution, and weather‐dependent link travel time functions are adopted. A probit‐based stochastic user equilibrium, which is based on the perceived expected travel disutility, is used to determine the multimodal route of the travelers. This model also considers the strategic behavior of the public transport travelers in choosing their routes, that is, common‐line network. Based on the stochastic multimodal model, the mean and variance of total travel time are analytical estimated for setting up the NDP. A sensitivity‐based solution algorithm is proposed for solving the NDP, and two numerical examples are adopted to demonstrate the characteristics of the proposed model. Copyright © 2014 John Wiley & Sons, Ltd.     

A network enhancement model with integrated lane reorganization and traffic control strategies

Lane reorganization strategies such as lane reversal, one‐way street, turning restriction, and cross elimination have demonstrated their effectiveness in enhancing transportation network capacity. However, how to select the most appropriate combination of those strategies in a network remains challenging to transportation professionals considering the complex interactions among those strategies and their impacts on conventional traffic control components. This article contributes to developing a mathematical model for a traffic equilibrium network, in which optimization of lane reorganization and traffic control strategies are integrated in a unified framework. The model features a bi‐level structure with the upper‐level model describing the decision of the transportation authorities for maximizing the network capacity. A variational inequality (VI) formulation of the user equilibrium (UE) behavior in choosing routes in response to various strategies is developed in the lower level. A genetic algorithm (GA) based heuristic is used to yield meta‐optimal solutions to the model. Results from extensive numerical analyses reveal the promising property of the proposed model in enhancing network capacity and reducing congestion. Copyright © 2016 John Wiley & Sons, Ltd.     

Second best toll pricing within the framework of bounded rationality

The network design problem is usually formulated as a bi-level program, assuming the user equilibrium is attained in the lower level program. Given boundedly rational route choice behavior, the lower-level program is replaced with the boundedly rational user equilibria (BRUE). The network design problem with boundedly rational route choice behavior is understudied due to non-uniqueness of the BRUE. In this study, thus, we mainly focus on boundedly rational toll pricing (BR-TP) with affine link cost functions. The topological properties of the lower level BRUE set are first explored. As the BRUE solution is generally non-unique, urban planners cannot predict exactly which equilibrium flow pattern the transportation network will operate after a planning strategy is implemented. Due to the risk caused by uncertainty of people’s reaction, two extreme scenarios are considered: the traffic flow patterns with either the minimum system travel cost or the maximum, which is the “risk-prone” (BR-TP-RP) or the “risk-averse” (BR-TP-RA) scenario respectively. The upper level BR-TP is to find an optimal toll minimizing the total system travel cost, while the lower level is to find the best or the worst scenario. Accordingly BR-TP can be formulated as either a min –min or a min –max program. Solution existence is discussed based on the topological properties of the BRUE and algorithms are proposed. Two examples are accompanied to illustrate the proposed methodology.     

Modelling rain effects on risk‐taking behaviours of multi‐user classes in road networks with uncertainty

This paper proposes a new travel time reliability‐based traffic assignment model to investigate the rain effects on risk‐taking behaviours of different road users in networks with day‐to‐day demand fluctuations and variations in travel time. A generalized link travel time function is used to capture the rain effects on vehicle travel times and road conditions. This function is further incorporated into daily demand variations to investigate those travel time variations arising from demand uncertainty and rain condition. In view of these rain effects, road users' perception errors on travel times and risk‐taking behaviours on path choices are incorporated in the proposed model with the use of a logit‐based stochastic user equilibrium framework. This new model is formulated as a variational inequality problem in terms of path flows. A numerical example is used to illustrate the application of the proposed model for assessment of the rain effects on road networks with uncertainty.     

A reliability‐based traffic assignment model for multi‐modal transport network under demand uncertainty

In densely populated and congested urban areas, the travel times in congested multi‐modal transport networks are generally varied and stochastic in practice. These stochastic travel times may be raised from day‐to‐day demand fluctuations and would affect travelers' route and mode choice behaviors according to their different expectations of on‐time arrival. In view of these, this paper presents a reliability‐based user equilibrium traffic assignment model for congested multi‐modal transport networks under demand uncertainty. The stochastic bus frequency due to the unstable travel time of bus route is explicitly considered. By the proposed model, travelers' route and mode choice behaviors are intensively explored. In addition, a stochastic state‐augmented multi‐modal transport network is adopted in this paper to effectively model probable transfers and non‐linear fare structures. A numerical example is given to illustrate the merits of the proposed model. Copyright © 2012 John Wiley & Sons, Ltd.     

Two-phase stochastic program for transit network design under demand uncertainty

This paper develops a reliability-based formulation for rapid transit network design under demand uncertainty. We use the notion of service reliability to confine the stochastic demand into a bounded uncertainty set that the rapid transit network is designed to cover. To evaluate the outcome of the service reliability chosen, flexible services are introduced to carry the demand overflow that exceeds the capacity of the rapid transit network such designed. A two-phase stochastic program is formulated, in which the transit line alignments and frequencies are determined in phase 1 for a specified level of service reliability; whereas in phase 2, flexible services are determined depending on the demand realization to capture the cost of demand overflow. Then the service reliability is optimized to minimize the combined rapid transit network cost obtained in phase 1, and the flexible services cost and passenger cost obtained in phase 2. The transit line alignments and passenger flows are studied under the principles of system optimal (SO) and user equilibrium (UE). We then develop a two-phase solution algorithm that combines the gradient method and neighborhood search and apply it to a series of networks. The results demonstrate the advantages of utilizing the two-phase formulation to determine the service reliability as compared with the traditional robust formulation that pre-specifies a robustness level.     

Formulating the within-day dynamic stochastic traffic assignment problem from a Bayesian perspective

This study proposes a formulation of the within-day dynamic stochastic traffic assignment problem. Considering the stochastic nature of route choice behavior, we treat the solution to the assignment problem as the conditional joint distribution of route traffic, given that the network is in dynamic stochastic user equilibrium. We acquire the conditional joint probability distribution using Bayes’ theorem. A Metropolis–Hastings sampling scheme is developed to estimate the characteristics (e.g., mean and variance) of the route traffic. The proposed formulation has no special requirements for the traffic flow models and user behavior models, and so is easily implemented.     

Global optimization methods for the discrete network design problem

This paper addresses the discrete network design problem (DNDP) with multiple capacity levels, or multi-capacity DNDP for short, which determines the optimal number of lanes to add to each candidate link in a road network. We formulate the problem as a bi-level programming model, where the upper level aims to minimize the total travel time via adding new lanes to candidate links and the lower level is a traditional Wardrop user equilibrium (UE) problem. We propose two global optimization methods by taking advantage of the relationship between UE and system optimal (SO) traffic assignment principles. The first method, termed as SO-relaxation, exploits the property that an optimal network design solution under SO principle can be a good approximate solution under UE principle, and successively sorts the solutions in the order of increasing total travel time under SO principle. Optimality is guaranteed when the lower bound of the total travel time of the unexplored solutions under UE principle is not less than the total travel time of a known solution under UE principle. The second method, termed as UE-reduction, adds the objective function of the Beckmann-McGuire-Winsten transformation of UE traffic assignment to the constraints of the SO-relaxation formulation of the multi-capacity DNDP. This constraint is convex and strengthens the SO-relaxation formulation. We also develop a dynamic outer-approximation scheme to make use of the state-of-the-art mixed-integer linear programming solvers to solve the SO-relaxation formulation. Numerical experiments based on a two-link network and the Sioux-Falls network are conducted.     

Adaptive traffic signal control with equilibrium constraints under stochastic demand

This study develops a methodology to model transportation network design with signal settings in the presence of demand uncertainty. It is assumed that the total travel demand consists of commuters and infrequent travellers. The commuter travel demand is deterministic, whereas the demand of infrequent travellers is stochastic. Variations in demand contribute to travel time uncertainty and affect commuters’ route choice behaviour. In this paper, we first introduce an equilibrium flow model that takes account of uncertain demand. A two-stage stochastic program is then proposed to formulate the network signal design under demand uncertainty. The optimal control policy derived under the two-stage stochastic program is able to (1) optimize the steady-state network performance in the long run, and (2) respond to short-term demand variations. In the first stage, a base signal control plan with a buffer against variability is introduced to control the equilibrium flow pattern and the resulting steady-state performance. In the second stage, after realizations of the random demand, recourse decisions of adaptive signal settings are determined to address the occasional demand overflows, so as to avoid transient congestion. The overall objective is to minimize the expected total travel time. To solve the two-stage stochastic program, a concept of service reliability associated with the control buffer is introduced. A reliability-based gradient projection algorithm is then developed. Numerical examples are performed to illustrate the properties of the proposed control method as well as its capability of optimizing steady-state performance while adaptively responding to changing traffic flows. Comparison results show that the proposed method exhibits advantages over the traditional mean-value approach in improving network expected total travel times.     

A methodology to control urban traffic noise under the constraint of environmental capacity: A case study of a double-decision optimization model

This paper presents a novel methodology to control urban traffic noise under the constraint of environmental capacity. Considering the upper limits of noise control zones as the major bottleneck to control the maximum traffic flow is a new idea. The urban road network traffic is the mutual or joint behavior of public self-selection and management decisions, so is a typical double decision optimization problem.The proposed methodology incorporates theoretically model specifications. Traffic noise calculation model and traffic assignment model for O–D matrix are integrated based on bi-level programming method which follows an iterated process to obtain the optimal solution. The upper level resolves the question of how to sustain the maximum traffic flow with noise capacity threshold in a feasible road network. The user equilibrium method is adopted in the lower layer to resolve the O–D traffic assignment.The methodology has been applied to study area of QingDao, China. In this illustrative case, the noise pollution level values of optimal solution could satisfy the urban environmental noise capacity constraints. Moreover, the optimal solution was intelligently adjusted rather than simply reducing the value below a certain threshold. The results indicate that the proposed methodology is feasible and effective, and it can provide a reference for a sustainable development and noise control management of the urban traffic.     

Reserve capacity model based on variable demand for land-use development control

In this paper, the concept of reserve capacity has been extended to zone level to measure the land-use development potentiality of each trip generation zone. Bi-level programing models are proposed to determine the signal setting of individual intersections for maximizing possible increase in total travel demand and the corresponding reserve capacity for each zone. The change of the origin–destination pattern with the variation of upper level decision variables is presented through the combined distribution/assignment model under user equilibrium conditions. Both singly constrained and doubly constrained combined models are considered for different trip purposes and data information. Furthermore, we have introduced the continuous network design problem by increasing road capacity and examined its effect on the land-use development potentiality of trip generation zone. A numerical example is presented to illustrate the application of the models and how a genetic algorithm is applied to solve the problem.     

Comparative analysis of three user equilibrium models under stochastic demand

Recent empirical studies on the value of time and reliability reveal that travel time variability plays an important role on travelers' route choice decision process. It can be considered as a risk to travelers making a trip. Therefore, travelers are not only interested in saving their travel time but also in reducing their risk. Typically, risk can be represented by two different aspects: acceptable risk and unacceptable risk. Acceptable risk refers to the reliability aspect of acceptable travel time, which is defined as the average travel time plus the acceptable additional time (or buffer time) needed to ensure more frequent on‐time arrivals, while unacceptable risk refers to the unreliability aspect of unacceptable late arrivals (though infrequent) that have a travel time excessively higher than the acceptable travel time. Most research in the network equilibrium based approach to modeling travel time variability ignores the unreliability aspect of unacceptable late arrivals. This paper examines the effects of both reliability and unreliability aspects in a network equilibrium framework. Specifically, the traditional user equilibrium model, the demand driven travel time reliability‐based user equilibrium model, and the α‐reliable mean‐excess travel time user equilibrium model are considered in the investigation under an uncertain environment due to stochastic travel demand. Numerical results are presented to examine how these models handle risk under travel time variability.     

A chance-constrained based stochastic dynamic traffic assignment model: Analysis, formulation and solution algorithms

This paper is concerned with the system optimum-dynamic traffic assignment (SO-DTA) problem when the time-dependent demands are random variables with known probability distributions. The model is a stochastic extension of a deterministic linear programming formulation for SO-DTA introduced by Ziliaskopoulos (Ziliaskopoulos, A.K., 2000. A linear programming model for the single destination system optimum dynamic traffic assignment problem, Transportation Science, 34, 1–12). The proposed formulation is chance-constrained based and we demonstrate that it provides a robust SO solution with a user specified level of reliability. The model provides numerous insights and can be a useful tool in producing robust control and management strategies that account for uncertainty in applications where SO-DTA is relevant (e.g. evacuation modeling, computing alternate routes around freeway incidents and establishing lower bounds on network performance).