半刚性基层沥青路面反射裂缝足尺试验研究

通过反射裂缝足尺试验来评价纤维增强沥青混合料和玻璃纤维土工格栅对抑制反射裂缝的效果，对抑制机理作了分析。试验证明，在普通沥青混合料中加入聚酯纤维以及使用改性沥青可使脆化点温度降低，增强低温抗裂性，加入聚酯纤维和在基层与面层之间铺设玻璃纤维格栅可有效抑制反射裂缝。     

乍嘉苏高速公路改性沥青SMA-13面层试验段施工

通过在浙江省乍浦—嘉兴—苏州高速公路改性沥青SMA—13路面试验段施工,总结出一套较为成熟的施工工艺,作为大面积施工依据。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

STUDY ON THE THERAPEUTIC EFFECTS OF GINSENOSIDE Rg-1 AND GASTRODINE ON AD MODEL RATS INDUCED BY β-AMYLOID PEPTIDE （25-35）

Alzheimer sdisease(AD)isadegenerativedis orderofcentralnervoussysteminhumanbeing.It ischaracterizedbylossofmemory,cognitivede clineandmisbehavior,aswellasoxidativedamage isincreasedandmetabolicrateisdecreased.Major pathologicalmarksofADareextracellarsenil…     

双相化处理工艺对冷拔双相钢丝组织和性能的影响

研究了08Mn2Si钢不同工艺处理后双相组织的形态及冷拔中组织与性能的变化,结果得到:950℃预淬火后再经临界区加热淬火时可以得到细小均匀的纤维状双相组枳,这种组织在冷拔中转变为很细的平行于拔丝方向的纤维状组织,且具有最好的强度和韧性。     

强化胎盘因子对细胞因子产生的影响

在观察了强化胎盘因子对淋巴细胞增殖试验影响的基础上,应用CTLL-2和7TD_1两种细胞株对强化胎盘因子刺激后的小鼠脾脏细胞分泌白细胞介素-2(IL-2)和白细胞介素-6(IL-6)水平分别进行了实验研究。结果表明,强化胎盘因子促进T淋巴细胞增殖,使小鼠脾脏细胞分泌IL-2和IL-6水牛均明显提高,有增强机体免疫功能的作用。     

工程机械租赁业的现状及前景

“租赁”在中国实际上已经有很长的历史。然而，工程机械租赁业在中国大陆是20世纪90年代才兴起的，其发展也就是近20年的事情.     

巧用数控折弯机模具

分析日本AMADA公司生产的FBDII-3512-1253/8025型数控液压折弯机的功能和存在的问题,提出了1种即节省模具,又不影响加工精度的合理有效使用模具的方法,拓展了数控折弯机的功能。     

空气断路器动触头加工工艺的改进

论述了空气断路器动触头原加工工艺存在的问题,提出了改进措施,从而保证产品质量,降低生产成本,提高工作效率,满足大批量生产的要求。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)