Magnetic field tuning characteristics of bimodal ultrasonic motor stator

The magnetic field tuning characteristics of an ultrasonic motor (USM) stator are discussed. The stator consists of two piezoelectric ceramic transducer (PZT) plates and one sandwiched-in Terfenol-D plate. The dimensions of the stator are carefully adjusted to specifically discuss the influence of the magnetic field on the frequency difference between the longitudinal and bending modes of the stator. The frequency difference discussed in this paper is usually small and mainly caused by uneven materials, machining errors and changes in external conditions (temperature, pre-stress or load). The longitudinal and bending modes of the stator are simultaneously excited by an external electric field to generate the elliptic motion trajectories of the driving points. A direct current (DC) magnetic field is applied to decrease the difference between the two mode frequencies of the fabricated stator. In experiments, the dependences of the two mode frequencies and their difference on DC magnetic fields are all investigated. The experimental results indicate that the difference between the longitudinal and bending mode frequencies of the PZT/Terfenol-D/PZT composite stator can be tuned by changing the intensity of the external DC magnetic field.     

Sensorimotor self-learning model based on operant conditioning for two-wheeled robot

Traditional control methods of two-wheeled robot are usually model-based and require the robot’s precise mathematic model which is hard to get. A sensorimotor self-learning model named SMM TWR is presented in this paper to handle these problems. The model consists of seven elements: the discrete learning time set, the sensory state set, the motion set, the sensorimotor mapping, the state orientation unit, the learning mechanism and the model’s entropy. The learning mechanism for SMM TWR is designed based on the theory of operant conditioning (OC), and it adjusts the sensorimotor mapping at every learning step. This helps the robot to choose motions. The leaning direction of the mechanism is decided by the state orientation unit. Simulation results show that with the sensorimotor model designed, the robot is endowed the abilities of self-learning and self-organizing, and it can learn the skills to keep itself balance through interacting with the environment.     

Approximate method for reliability assessment of complex phased mission systems

Phased-mission systems (PMSs) have wide applications in engineering practices, such as manmade satellites. Certain critical parts in the system, such as cold standby, hot standby and functional standby, are designed in redundancy architecture to achieve high reliability performance. State-space models such as Markov process have been used extensively in previous studies for reliability evaluation of PMSs with dynamic behaviors. The most popular way to deal with the dynamic behaviors is Markov process, but it is well known that Markov process is limited to exponential distribution. In practice, however, the lifetime of most machinery products can follow non-exponential distributions like the Weibull distribution which cannot be handled by the Markov process. In order to solve this kind of problem, we present a semi-Markov model combined with an approximation algorithm to analyze PMS reliability subjected to non-exponential failures. Furthermore, the accuracy of the approximation algorithm is investigated by comparing to an accurate solution, and a typical PMS (attitude and orbit control system) is analyzed to demonstrate the implementation of the method.     

Design of car battery protection device based on torsion spring

In recent years, electric vehicles are developing rapidly in automotive industry. When involved in accidents, if the batteries of electric cars break, it is likely to cause a short circuit and start a fire. Aimed at this issue, a car battery protection device based on torsion spring has been designed. The car battery protection device can deform in a particular pattern in a collision accident. Impact energy of the accident is absorbed by the deformation, which can significantly reduce impact force on the batteries. Meanwhile, based on the principle of maximum energy absorption, some crucial parameters of the device can be determined. Furthermore, an impact simulation conducted on ANSYS software shows that maximum safety factors can be obtained when the material of car battery protection device is carbon steel. The analysis of “safe space” in the car battery protection device shows that the device can prevent battery damage effectively in general circumstances, which means the reliability of the device has been verified. Therefore, when applied to electric vehicles, the car battery protection device, which can prevent secondary accidents, significantly improves the vehicle security in accidents.     

Gain and noise figure analysis of Er<Superscript>3+</Superscript>-doped YAG transparent ceramic microchip amplifier

The rate equations and the power evolution equations based on excited state absorption (ESA) and cooperative upconversion (CUC) of high concentration erbium-doped yttrium aluminum garnet (YAG) transparent ceramic waveguide amplifier are set up to analyze the effects of the pump power, active ion concentration and waveguide length on the amplifier gain and noise figure (NF). The numerical analysis predicts that with a pump power of 100mW, an active ion concentration of 1.0×10²⁶ ion/m³ and a waveguide length of 3 cm, a small-signal gain of 30 dB and an NF of 5 dB can be achieved in the micro-chip amplifier.     

Study of the helicopter blade running elevation measurement system

Helicopter blade running elevation measurement is an important measure target in helicopter blade dynamic balance experimentation. The elevation influences the helicopter＇ s security and other performance capabilities. In testing, however, it has been difficult to measure the elevation when the rotor reaches high speeds. To get a simple, fast and highly accurate measurement system, photo electricity technology was applied to measuring the blade running elevation. Discussed is the measurement principle of blade running elevation, tire design of the measurement system and analysis of the measurement precision.     

Course-keeping control of underactuated hovercraft

The course-keeping control of underactuated hovercraft with two aft propellers was considered. The control of the heading error and cross-track error was accomplished by the yaw torque merely in this case. The hovercraft dynamic model is nonlinear and underactuated. At first the Controllability of course-keeping control for hovercraft was proved, then a course-keeping control law was derived that keeps hovercraft heading constant as well as minimizes the lateral movement of hovercraft. The proposed law guarantees heading error and sway error all converge to zero exponentially. Simulation tests were carried out to illustrate the effectiveness of the proposed control law. For further research, the disturbance influence would be considered in the dynamic equations.     

Special requirements for alumina ceramic of ESG electrode bowl

At present ESG (Electrostatic Suspended Gyro) is the most precise inertia element in the world. The electrode bowl, which has direct effect on the precision of ESG, is a key part to ESG. Through the analysis of the function and characteristic of the electrode bowl in hollow rotor ESG and the present situation of new material development in the world, the alumina ceramic is regarded as the best material for the electrode bowl of hollow rotor ESG. By analyzing the present situation of alumina ceramic in the world, main technique requirements have been put forward for the alumina ceramic of ESG electrode bowl which is also fit for solid rotor ESG.     

Trace metals in water, sediments and marine organisms from the northern part of the Gulf of Suez, Red Sea

Concentrations of Cd, Pb, Cu and Zn were determined in water, sediments, gastropod (Bulla umpulla) and green algae (Ulva lactuca) collected from five stations in the western side of the northern part of the Gulf of Suez during the period February 1993–January 1994. Sediments recorded the highest concentrations of Cd (2.26–4.40 μg/g) and Pb (13.90–28.34 μg/g), While the highest concentrations of the essential metals Cu and Zn were found in B. umpulla (28.19–72.04 and 60.24–108.74 μg/g, respectively). Water and sediments showed similar spatial distribution patterns for the highest mean values of the different metals. Highest values of the studied metals were found at stations influenced by various pollution sources such as harbours, and sewage and industrial drains. In contrast, the lowest concentrations were observed faraway from any pollution source. Calculations of concentration factors (C.F.) for gastropod and algae showed highest C.F. of Cd (4312.5–8705.9) and Pb (2103.3–8317.9) in algae, and highest C.F. of Cu (5288.9–42376.5) and Zn (3686.7–9631.5) in gastropod.