吊拉组合体系预应力连续加劲梁性能分析

按照６ 种不同分跨的设计方案, 每种方案又按照施工阶段采取几种不同预压荷载的计算比较来研究按照预压合龙施工工艺完成体系转换的预应力连续加劲梁吊拉组合体系桥的主梁结构性能, 并选择体系的最优分跨比．     

车用电喷式汽油机9工况排放测试分析

按9工况法规对车用电喷式汽油机进行排放测量试验,对3种有害排气污染物(CO,HC,NOx)单工况和同类工况分担率进行了分析,得出各工况对整机排放的影响程度,并提出了改善该类汽油机排放水平的重点研究工况。     

Optimal tolls for multi-class traffic: Analytical formulations and policy implications

This paper puts together an analytical formulation to compute optimal tolls for multi-class traffic. The formulation is comprised of two major modules. The first one is an optimization component aimed at computing optimal tolls assuming a Stackelberg game in which the toll agency sets the tolls, and the equilibrating traffic plays the role of the followers. The optimization component is supported by a set of cost models that estimate the externalities as a function of a multivariate vector of traffic flows. These models were estimated using Taylor series expansions of the output obtained from traffic simulations of a hypothetical test case. Of importance to the paper is the total travel time function estimated using this approach that expresses total travel time as a multivariate function of the traffic volumes. The formulation presented in the paper is then applied to a variety of scenarios to gain insight into the optimality of current toll policies. The optimal tolls are computed for two different cases: independent tolls, and tolls proportional to passenger car equivalencies (PCE).The numerical results clearly show that setting tolls proportional to PCEs leads to lower values of welfare that are on average 15% lower than when using independent tolls, though, in some cases the total welfare could be up to 33% lower. This is a consequence of two factors. First, the case of independent tolls has more degrees of freedom than the case of tolls proportional to PCEs. Second, tolls proportional to PCEs do not account for externalities other than congestion, which is likely to lead to lower welfare values.The analytical formulations and numerical results indicate that, because the total travel time is a non-linear function of the traffic volumes, the marginal social costs and thus the optimal congestion tolls also depend on the traffic volumes for each vehicle class. As a result of this, for the relatively low volumes of truck traffic observed in real life, the optimal congestion tolls for trucks could indeed be either lower or about the same as for passenger cars. This stand in sharp contrast with what is implied in the use of PCEs, i.e., that the contribution to congestion are constant. This latter assumption leads to optimal truck congestion tolls that are always proportional to the PCE values.The comparison of the toll ratios (truck tolls divided by passenger car tolls) for both observed and optimal conditions suggests that the tolls for small trucks are about the right level, maybe a slightly lower than optimal. However, the analysis of the toll ratio for large trucks seems to indicate a significant overcharge. The estimates show that the average observed toll ratio for large trucks is even higher than the maximum optimal toll ratio found in the numerical experiments. This suggests that the tolls for large trucks are set on the basis of revenue generation principles while the passenger car tolls are being set based on a mild form of welfare maximization. This leads to a suboptimal cross-subsidization of passenger car traffic in detriment of an important sector of the economy.     

Correcting injection pressure maladjustments to reduce NOX emissions by marine diesel engines

Emissions from the exhausts of marine diesel engines comprises several different gases including NO_X. These are currently regulated at the international level under Regulation 13 of ANNEX VI of MARPOL 73/78, but this regulation only applies to new engines and is based on bench tests, for only a single engine designated the “parent engine”. Here, the need to take measurements from across their whole range and once in operation on board a vessel is examined. This would not only improve assessment of new equipment against the current regulation, but would also detect defects in the functioning of the engine.     

Uncertain demand,modal competition and optimal price-capacity adjustments in air transportation

A new microeconomic model for the operation of an airline facing modal competition with uncertain total demand is developed to analyze optimal price capacity combinations. The novelty is the treatment of the capacity restriction, which is not viewed as affecting negatively individual preferences (e.g. probability of a full flight), but does influence aggregate utility. A mode choice model is used to represent unrestricted individual preferences assuming full availability (phone call demand); air capacity is treated as a variable that acts on the actual choice set. Restricted choices and total demand stochasticity are integrated in welfare calculations (users' benefits and profits). Numerical examples are given and results are analyzed in terms of load factors fare levels, and sensitivity to the stochasticity of requests.This research was partially funded by FONDECYT, Chile, Direction Génerale de l'Aviation Civile, France, the Andes Foundation and the Fulbright Commission.     

The sharing economy and the job market: the case of ride-hailing drivers in Chile

Transportation - Ride-hailing (ridesourcing) companies such as Uber, Lyft, and Didi Chuxing have been a disruptive force in the urban mobility landscape around the world during the past decade. In...     

Estimating the value of risk reductions for car drivers when pedestrians are involved: a case study in Spain

We estimated the benefits associated with reducing fatal and severe injuries from traffic accidents using a stated choice experiment where choice situations were generated through a statistically efficient design. Specifically, the risk variables were defined as the expected annual number of vehicle car-users that suffered their death or were severely injured in a traffic accident. In addition, and differing from previous research, the number of pedestrians that died or were severely injured in traffic accidents per year was also included as a risk attribute in the choice experiment, to attempt at measuring drivers’ willingness to pay to reduce the risk of hitting pedestrians in a crash. The empirical setting was a choice of route for a particular trip that a sample of car drivers periodically undertakes in Tenerife, Spain. Models were estimated accounting for random taste heterogeneity and pseudo-panel data correlation. The median of the distribution of simulated parameters was used to obtain a representative measure for the monetary valuation of risk reductions. We found that the ratio between the values of reducing the risk of suffering a serious injury and that of reducing a fatality was approximately 18 %. Further, and quite novel, we also found that the value of reducing a pedestrian fatality was 39 % of the value of reducing a car occupant fatality.     

Spatial impacts of road pricing: Accessibility, regional spillovers and territorial cohesion

Road pricing policies are gaining prominence in EU countries. These policies have positive impacts leading to mobility patterns which are socially and environmentally more desirable, but they also have negative impacts. One negative impact is to be found in regional accessibility, due to the increase in generalized transport costs. This study presents a methodology based on accessibility indicators and GIS to assess the accessibility impacts of a road pricing policy. The methodology was tested for the Spain’s road network considering two road pricing scenarios. It enables not only the more penalized regions to be identified but also negative road pricing spillover effects between regions. These effects are measured in terms of accessibility changes occurring in one region produced by charges implemented in another region. Finally, the study of accessibility disparities (by calculating inequality indexes for each of the scenarios considered), provides policymakers with useful information regarding the impact of road pricing policies from the point of view of territorial cohesion.     

Traffic noise abatement: How different pavements, vehicle speeds and traffic densities affect annoyance levels

In this paper, annoyance ratings from traffic noise recorded on cobblestones, dense asphalt, and open asphalt rubber pavements are assessed with regard to car speeds and traffic densities. It was found that cobblestones pavements are the most annoying; also while open asphalt rubber pavement imposes less annoyance than dense asphalt it is not significantly different. Higher car speeds always lead to greater annoyance, as does higher traffic densities. LAeq and LAmax correlate well with annoyance, but loudness is the best predictor. Roughness and sharpness exhibit inconsistent interactions.     

Investigation of carriers’ ability to transfer toll increases: an empirical analysis of freight agents’ relative market power

Transportation - Design of effective freight policies requires a comprehensive understanding of freight agents’ interactions. A critical component of the interaction is the freight...