T型承重轨道局部熔透角焊缝横向裂纹产生

带有不锈钢衬板的T型承重轨道采用局部熔透角焊缝,由于焊接施工中未能控制好不锈钢焊缝与碳钢焊缝的合理间距,使得碳钢焊缝中渗入了不锈钢的成份,从而导致了横向裂纹的出现.通过对裂纹产生原因的分析,提出了改进措施,取得了明显效果.     

T型承重轨道局部熔透角焊缝横向裂纹产生的原因及改进措施

带有不锈钢衬板的T型承重轨道采用局部熔透角焊缝,由于焊接施工中未能控制好不锈钢焊缝与碳钢焊缝的合理间距,使得碳钢焊缝中渗入了不锈钢的成份,从而导致了横向裂纹的出现。通过对裂纹产生原因的分析,提出了改进措施,取得了明显效果。     

高速动车组尾车横向晃动调查研究

某型号高速动车组运行过程中,尾车在新轮状态时出现持续晃动,但反向作头车运行时却不晃动.针对此问题,开展了不同线路表面状态下的车辆晃动特征测试,从悬挂系统振动传递特性、轮轨匹配状态,以及关键零部件性能检测等方面着手,确定了车体产生晃动的原因.结果 表明,尾车横向晃动始于车辆高速通过个别道岔时刻,晃动发生后只能通过降速消除...     

800kV组合电器用金属波纹管补偿器检验控制

简要说明800 kV组合电器用金属波纹管补偿器小型化发展趋势,详细阐述了该产品质量控制的各个环节：原材料验收、铸铝法兰剪切力试验、部件尺寸及外观检验、无损检测控制、密封面平面度检验、内保护套铆接后质量检验、水压试验和SF6试验、型式试验等。     

压力平衡型波纹补偿器在组合电器上的应用

文中主要介绍直管压力平衡型波纹补偿器和碟簧压力平衡型波纹补偿器的结构、制造、检验及在GIS系统高压组合电器上的应用。通过介绍,使设计人员、现场应用人员对高压组合电器用波纹补偿器的设计要求、使用方法有所了解。     

组团式发展模式的城市道路供需分析

针对当前城市道路的供需矛盾问题,对组团式发展模式的城市进行了研究,提出了解决组团式模式下的城市道路供需问题的思路和建议,并以西安市为例进行了分析,以期为缓解这种城市的供需矛盾提供参考。     

郑州东风路下穿立交地下连续墙设计

作为城市快速路及立交系统的主要选择方式,隧道是解决城市交通问题的重要手段。该文结合郑州市东风路文化路下穿隧道工程,对城市繁华地段下穿隧道设计中一些共性问题加以探讨,以寻求、积累更多的工程经验。     

就地冷再生技术在旧沥青路面路改造工程中的应用

采用就地冷再生技术,能够节约大量的原材料,节省工程投资,缩短工期,同时有利于废料处理,保护环境,因而具有较大的经济效益和社会效益。     

Recycling of aluminum from fibre metal laminates

Recycling of aluminum alloy scrap obtained from delaminated fibre metal laminates (FMLs) was studied through high temperature refining in the presence of a salt flux. The aluminum alloy scrap contains approximately mass fraction w(Cu) = 4.4%, w(Mg) = 1.1% and w(Mn) = 0.6% (2024 aluminum alloy). The main objective of this research is to obtain a high metal yield, while maintaining its original alloy compositions. The work focuses on the metal yield and quality of recycled Al alloy under different refining conditions. The NaCl-KCl salt system was selected as the major components of flux in the Al alloy recycling. Two different flux compositions were employed at NaCl to KCl mass ratios of 44:56 and 70:30 respectively, based on either the eutectic composition, or the European preference. Different additives were introduced into the NaCl-KCl system to study the effect of flux component on recycling result. Although burning and oxidation loss of the alloying elements during re-melting and refining take place as the drawbacks of conventional refining process, the problems can be solved to a large extent by using an appropriate salt flux. Experimental results indicate that Mg in the alloy gets lost when adding cryolite in the NaCl-KCl salt system, though the metal yield can reach as high as 98%. However, by adding w(MgF₂) = 5% into the NaCl-KCl salt system (instead of using cryolite) all alloying elements were well controlled to its original composition with a metal yield of almost 98%.     

预应力混凝土连续箱梁悬臂施工的主梁标高测量

箱梁在悬臂施工时,混凝土受许多因素的影响,悬臂产生变化。介绍了预应力混凝土连续箱梁悬臂施工的主梁标高测量。