Hybrid Electric Drive for DDG-51 Class Destroyers

The first of the Arleigh Burke class destroyers is nearing its mid-life. This class of ships was designed during the late 1970s through the 1980s to meet the threats that were prevalent at that time. Since entering service in 1991, these ships have shown themselves to be extremely versatile and the class now consists of nearly 60 ships in service. Their combat systems have been continually upgraded and adapted to meet the new threats the United States faces today. However, in order to keep these platforms viable throughout the first half of the 21st century, their operating costs must be reduced. Manpower, maintenance, and fuel are three of the top operating cost drivers. Most surface combatants spend very little of their underway time operating at full speed or even close to that. Over 1/3 of their underway time is spent at 12 knots and under. This is less than half of their maximum speed and only a fraction of the maximum power owing to the cubic speed–power relationship. Although the existing mechanical drive system is reasonably efficient, the main gas turbines are extremely inefficient at these very low power levels. A shaft-mounted auxiliary electric propulsion system (EPS) can take advantage of excess capacity in the ship service generators to reduce the main engine operating hours. Enabling bi-directional power flow from this auxiliary electric drive will provide additional generation capacity for ship service loads at a modest additional cost. It also provides a "cross-connect" capability from one shaft to the other. This paper will explore one prospect for reducing the operating cost of the DDG-51 class of ships by installing an auxiliary EPS that would powered by the ship service electrical plant. This additional system would serve to reduce both underway fuel usage as well as maintenance on the gas turbine main engines by reducing the number of operating hours on each engine. We will examine the technology trade-offs in this ongoing study.     

Micro-Grinding Performance of Hard-Brittle Chip Materials in Precision Micro-Grinding Microgroove

The micro-structure on hard-brittle chip materials (HBCMs) surface can produce predominant functions and features. The micro-grinding with diamond wheel micro-tip is an efficient method to machine microstructure on HBCMs. However, different HBCMs and crystal orientation may have a significant influence on the micro-grinding performance. In this paper, the micro-grinding performance along different crystal orientation of HBCMs is investigated. First, a dressed 600^# diamond grinding wheel is used to micro-grind micro-structure on HBCMs. Then, the experiment of micro-grinding force test is completed. Finally, the quality of microgroove, the grinding ratio and the micro-grinding force are investigated and they are related to the crystal orientation of HBCMs. It is shown that the stronger resistance to the micro-crack propagation has the best quality of microgroove and the smallest grinding ratio. Moreover, the hardest single-crystal SiC has the best machinability and the micro-grinding force is 38.9%, 10.8% and 46.8% less than the one of sapphire, single-crystal Si and quartz glass, respectively. The direction to micro-grind easily is the crystal orientation 〈10\(\overline 1 \)0〉 for single-crystal SiC and sapphire. In addition, the micro-grinding force increases with the increase of the micro-grinding depth and feed rate and decreases with the increase of the grinding wheel speed.     

Lattice-based group signature with verifier-local revocation

Among several post quantum primitives proposed in the past few decades, lattice-based cryptography is considered as the most promising one, due to its underlying rich combinatorial structure, and the worst-case to average-case reductions. The first lattice-based group signature scheme with verifier-local revocation(VLR) is treated as the first quantum-resistant scheme supported member revocation, and was put forward by Langlois et al. This VLR group signature(VLR-GS) has group public key size of O(nm log N log q), and a signature size of O(tm log N log q log β). Nguyen et al. constructed a simple efficient group signature from lattice, with significant advantages in bit-size of both the group public key and the signature. Based on their work, we present a VLR-GS scheme with group public key size of O(nm log q) and signature size of O(tm log q). Our group signature has notable advantages: support of membership revocation, and short in both the public key size and the signature size.     

主动导向转向架的多体动力学仿真与试验研究

对主动导向转向架的半车模型进行了多体动力学计算,并进行了滚动台试验,计算结果和试验结果基本一致。将半车模型扩展为整车模型后,进行了计算分析,研究结果表明,主动导向转向架可以大大提高转向架的曲线通过性能。     

Socially and environmentally appropriate urban futures for the motor car

In its relatively short life, the automobile has provided a level of mobility unlikely to have been feasible with a reliance on conventional forms of land based public transport. It has contributed in both a positive and negative way to the quality of life, transforming our cities, our way of life, and giving us a greater command over time and space. Concern over the undesirable social and environmental impacts has increased over time, with calls for governments to take action to reduce the automobile's dominant role. New investment in fixed-track public transport and bus priority systems together with strategies to discourage travel have been proposed to improve accessibility and to aid in cleaning up the physical environment. This paper reviews some of the issues facing society as it works to identify policies to achieve an economically and environmentally sustainabie future. There is a need for a broader set of policies to facilitate alternative land use-transport lifestyles while facing appropriate pricing signals. Some of the key issues are adjustments in the relative prices of location and transport, spatial incentives to make public transport economically viable (i.e. changing urban densities, zoning/incentive changes to allow more infill), road pricing (i.e. charging cars the economic cost of using the roads), new information technology systems (e.g. IVHS) to improve the efficiency and effectiveness of transport infrastructure, major improvements in the fuel efficiency of fossil fuelled vehicles, and alternative-fuelled vehicles (clean-air vehicles).     

Performance indicators for transit management

Transit performance can be evaluated through quantitative indicators. As the provision of efficient and effective transit service are appropriate goals to be encouraged by federal and state governments, these goals are used to develop performance indicators.Three efficiency and four effectiveness indicators are described, together with two overall indicators. These nine indicators are analyzed for comparability utilizing operating and financial data collected from public transit agencies in California.Performance indicators selected for this study should not be viewed as final. Twenty-one performance indicators proposed by previous studies were reviewed. Theoretical considerations and unavailability or unreliability of data caused omission of several useful measures like passenger-miles. Circumstances such as improved data, emphasis upon goals other than efficiency and effectiveness, and local conditions might warrant the inclusion of indicators deleted from this research.This paper is based on work conducted for the Urban Mass Transportation Administration under University Research and Training Grant CA-11-0014, Development of Performance Indicators for Transit. The views expressed herein are those of the authors and not necessarily those of the University of California or the United States Government. We are indebted to John Feren for assistance with the statistical processing and data gathering.     

Regulatory reform and freight mode choice

Reform of trucking Vehicle Weights and Dimensions (VWD) regulations in Canada is now underway. The effect these reforms will have on the freight transportation industry are only recently the subject of research. This paper is part of this new research effort, aimed at understanding how regulatory reform in the trucking sector will affect the existing competitive relationship between trucks and the railways. The paper presents the results of study and research into modelling the relationship between mode choice and the service characteristics that are affected by VWD reform.Using several periods of data, a series of econometric models are developed which help to elucidate the relative relationships between the mode service characteristics for both of the principal interprovincial freight modes. A technique is developed and presented to model railway user costs in order to overcome the complex and often unrepresentable pricing activities of Canadian railways.The strength of the developed econometric models is presented, including their significance and statistical reliability. This is further reinforced by the similarities exhibited by all the models in the series. The selected model is applied to predict market service responses required of the railway industry in order to compete with the trucking sector now adapting to the new regulations.The impact of the newly implemented vehicle weight and dimension reform on the rail transportation industry is analyzed and railway industry improvements aimed at maintaining its market share are presented. The results predicted by the model show that railway user cost reductions should be moderate, and likely less than the level of inflation over the period of time when trucking converts its fleet to take advantage of the new regulations.Abbreviations AASHTO American Association of State Highway and Transportation Officials - CCMTA Canadian Conference of Motor Transport Administrators - EPI End products, inedible commodity classification - GVW Gross Vehicle Weight - NA 1988 VWD National Agreement - RTAC Roads and Transportation Association of Canada - VWD Vehicle Weight(s) and Dimension(s) - WA 1988 VWD Western Agreement     

一种最佳的汽车混合动力总成

介绍了对混合动力总成进行优化的建模及仿真工具《汽车快速性能优化及报告工具包—汽车系统模块(RAPTOR^TM—VSM)软件包》，指出了优化混合动力总成需在混合动力发动机、电动机、电池、超级电容器、动力总成配置和自动／手动变速器(AMT)控制器等方面做的工作。     

压实质量的动态控制

探讨了压路机在压实施工中，压实质量的动态控制问题。结合课题实践，构思出了压实质量动态适时控制系统的工作框图。     

Train scheduling simulation that minimises operational conflicts due to service constraints

This paper presents an attempt made to facilitate re‐scheduling of trains to minimize operational delays and accommodate uniform headways for off peak sub urban services subject to resource constraints such as locomotive availability, poor track conditions and stations without siding facilities. The paper describes the computer simulation model designed to optimize train schedules on single‐track rail lines. Using this simulation program it is possible to plan and optimize timetables for railway networks with train runs within short time periods for both single track and double track conditions. The paper describes the capabilities of presenting the results of the simulation runs. These include the time‐distance graph, the network with train movements, dialog boxes with information about selected trains. The programme is capable of changing the starting point, departure time, train destinations and adding or deleting a stop etc. from the user interface. Four objects of array variables are used in the simulation process to keep train and station data. Two object arrays are used for the train movements in up and down directions. The stations' data are stored in the other two object arrays. One of these arrays of stations contains all the stations of the line while the other one contains only the stations with siding facilities. A case study that covers a 61 km long single‐track line with 14 stations is presented to highlight the model capabilities.