Non-Contact Suspension and Propulsion Technology

As a result of extensive research and development in several countries, the technologies of magnetic suspension and linear electric drives are becoming available for transportation applications. The successful demonstration and operation of prototype vehicles has established the technical viability of these systems. Several urban transit or shuttle services, with magnetic suspension and/or linear motor propulsion are likely to be operational within 3-4 years. After the final stages ofdevelopment and rigorous testing, high speed systems are likely to be an option for intercity implementation by the end of the decade. This paper presents a report on the worldwide status of R&D and test programs of non-contact suspension and propulsion technology for guided ground transport.     

Optimal Design of Running Gears Part I. Theory

A survey is given of the theory developed by author during recent years for an optimal design of railway vehicle running gears. It enables the designer to build a running gear which at the same time has good curving properties and is stable up to a high vehicle speed.     

Testing and Analysis Techniques for Safety Assessment of Rail Vehicles: The State-of-the-Art

The methods currently being used in North America, Britain and Europe for the safety assessment of rail vehicles are discussed. There is considerable disparity between the methods that have been developed in the different countries. These differences, and the possible reasons for them, are discussed in the paper. Finally, conclusions are drawn and some recommendations are made for the future direction of safety assessment methods.     

The growth of fleets registered in the newly-emerging maritime countries and maritime crises

This paper suggests the existence of a feedback relationship between the dynamic entrance of less-developed countries in shipping and the prolongation and deepening of maritime crises. The duration and extent of the transitional period of crisis depends also on the specific terms of the 'succession' procedure between fleets with different cost levels. During the last major maritime crisis, nations at a less advanced stage of development entered the maritime industry producing a service that had become—more or less—'standardized', following the Vernon product cycle more than all other cycles. The distribution of world tonnage among the different groups of countries underwent major changes as the effects of the economic crisis after 1973, which coincided with developments in the supply of tonnage, created favourable conditions for the rise of the lower cost fleets of developing countries, in a feedback relationship. The restoration of freight levels during the late 80s and early 90s, which was accompanied by a certain stabilization in the various groups of countries' shares in the world fleet, corroborates from the opposite direction the hypothesis of a close interrelationship between maritime crisis and changes in the international hierarchy in shipping.     

Risk and investment decisions in non-liner shipping

The investment decisions of non-liner shipping firms based on their behaviour towards risk, stochastic demand for capacity, inelastic supply and foregone profits are discussed. These aspects are formalized in a simple stochastic model, which, together with definitions of two broad categories of risk behaviour, is then used to examine and contrast the investment decisions of the two different strategic groups. The analysis shows that the capacity expansions/investments sought by the risk averter and the risk lover will differ under 'normal' circumstances with the risk averter having significantly less capacity than the risk lover. The risk lover will have higher capacity in a volatile market than in a stable market situation. During periods of high capital costs, the investment decisions of the two risk groups tend to be indistinguishable.     

Automatic control of clutches and simulations for parallel hybrid vehicles

This paper is a continuation of a previous paper titled ??Modeling and Model Predictive Control for Hybrid Vehicle?? published on IJAT/2011 describing a mathematical model and design for a model predictive controller for tracking speeds and simulations. The present paper further describes a fuzzy logic controller for the smooth and quick engagement of an automatic clutch. The described controller uses both fuzzy logic and slip control algorithms to enable automatic clutch engagement. Clutch engagement and comprehensive simulations for the hybrid vehicle are conducted in MATLAB R2009s. The research described herein offers theoretical solutions for how to better control clutch slip and engagement within realistic parameters used for hybrid vehicles. Algorithms and operations of this fuzzy logic controller can be implemented in electronic control units for automatic clutch engagements and gear-shifting processes.     

主动导向转向架的多体动力学仿真与试验研究

对主动导向转向架的半车模型进行了多体动力学计算,并进行了滚动台试验,计算结果和试验结果基本一致。将半车模型扩展为整车模型后,进行了计算分析,研究结果表明,主动导向转向架可以大大提高转向架的曲线通过性能。     

Estimation of the effects of aircraft noise on residential satisfaction

This study assesses the effects of aircraft noise on residential satisfaction, an important indicator of subjective well-being. A structural equation model is specified that estimates the relationships between objective variables, noise annoyance variables and residential satisfaction. Secondary data-analysis is used to estimate the model. The survey was conducted in 1996/1997 among the population living within a 25-km radius of Amsterdam Schiphol, the largest airport in the Netherlands. The effect of aircraft noise annoyance is found to be relatively small. In addition, the objective level of aircraft noise exposure is found to be a better predictor of residential satisfaction than its subjective counterpart. The most important determinants of residential satisfaction are found to be road traffic noise annoyance, age and neighbor noise annoyance.     

Automobile aerodynamics influenced by airfoil-shaped rear wing

Computational model is developed to analyze aerodynamic loads and flow characteristics for an automobile, when the rear wing is placed above the trunk of the vehicle. The focus is on effects of the rear wing height that is investigated in four different positions. The relative wind incidence angle of the rear wing is equal in all configurations. Hence, the discrepancies in the results are only due to an influence of the rear wing position. Computations are performed by using the Reynolds-averaged Navier-Stokes equations along with the standard k-ε turbulence model and standard wall functions assuming the steady viscous fluid flow. While the lift force is positive (upforce) for the automobile without the rear wing, negative lift force (downforce) is obtained for all configurations with the rear wing in place. At the same time, the rear wing increases the automobile drag that is not favorable with respect to the automobile fuel consumption. However, this drawback is not that significant, as the rear wing considerably benefits the automobile traction and stability. An optimal automobile downforce-to-drag ratio is obtained for the rear wing placed at 39 % of the height between the upper surface of the automobile trunk and the automobile roof. Two characteristic large vortices develop in the automobile wake in configuration without the rear wing. They vanish with the rear wing placed close to the trunk, while they gradually restore with an increase in the wing mounting height.     

Extending stated choice analysis to recognise agent-specific attribute endogeneity in bilateral group negotiation and choice: a think piece

This paper is a think piece on variations in the structure of stated preference studies when modelling the joint preferences of interacting agents who have the power to influence the attribute levels on offer. The approach proposed is an extension of standard stated choice methods, known as ‘stated endogenous attribute level’ (SEAL) analysis. It allows for interactive agents to adjust attribute levels off a base stated choice specification that are within their control, in an effort to reach agreement in an experimental setting. This accomplishes three goals: (1) the ability to place respondents in an environment that more closely matches interactive settings in which some attribute levels are endogenous to a specific agent, should the modeller wish to capture such behaviour; (2) the improved ability of the modeller to capture the behaviour in such settings, including a greater wealth of information on the related interaction processes, rather than simply outcomes; and (3) the expansion of the set of situations that the modeller can investigate using experimental data.