Improving noise assessment at intersections by modeling traffic dynamics

Three families of road noise prediction models can be distinguished. Static noise models only consider free-flow constant-speed traffic with uniformly distributed vehicles. Analytic noise models assume that all vehicles are isolated from one another but account for their mean kinematic profile over the network. Micro-simulation noise models relax the hypothesis of no interaction between vehicles and fully capture traffic flow dynamic effects such as queue evolution. This study compares the noise levels obtained by these three methodologies at signalized intersections and roundabouts. It reveals that micro-simulation noise models outperform the other approaches. Particularly, they are able to capture the effects of stochastic transient queues in under-saturated conditions as well as stop-and-go behaviors in oversaturated regime. Accounting for traffic dynamics is also shown to improve predictions of noise variations due to different junction layouts. In this paper, a roundabout is found to induce a 2.5 dB(A) noise reduction compared to a signalized intersection in under-saturated conditions while the acoustic contributions of both kinds of junctions balance in oversaturated regime.     

Second-order hydrodynamic effects on an arrangement of two concentric truncated vertical cylinders

The second-order diffraction problem by a piston-like arrangement that consists of two concentric surface piercing cylinders is considered. The developed matched axisymmetric eigenfunction expansion solution methodology in cylindrical co-ordinates is based on the semi-analytical formulation of the velocity potentials in the various fluid regions which are defined by the geometry of the two-body arrangement. The main difficulty associated with the specific configuration originates from the fact that the geometry defines two fluid regions that extend up to the free surface in which the inhomogeneous second-order free surface boundary condition has to be fulfilled. To this end the associated velocity potentials in these regions are decomposed into a number of components defining the so-called ‘free’ and ‘locked’ waves. The latter are calculated by solving the resulting Sturm–Liouville problems. The seek second-order velocity potential in the whole fluid domain is then derived by enforcing matching conditions for the radial velocities and the fluid pressures at the cylindrical boundaries of adjacent fluid domains. Numerical results concerning the second-order hydrodynamic loading and the wave run-up on the cylinders are given, whereas special attention is given at incident wave frequency regions where the first-order exciting wave forces attain maximum values due to the resonant fluid motions in the moonpool.     

Sea level and Eddy Kinetic Energy variability in the Bay of Biscay, inferred from satellite altimeter data

Twelve years (1993–2005) of altimetric data, combining different missions (ERS-1/2, TOPEX/Poseidon, Jason-1 and Envisat), are used to analyse sea level and Eddy Kinetic Energy variability in the Bay of Biscay at different time-scales. A specific processing of coastal data has been applied, to remove erroneous artefacts. Likewise, an optimal interpolation has been used, to create a series of regional Sea Level Anomaly maps, merging data sets from two satellites.The sea level presents a trend of about 2.7 mm/year, which is within the averaged values of sea level rise in the global ocean. Frequency spectra show that the seasonal cycle is the main time-scale affecting the sea level and Eddy Kinetic Energy variability. The maximum sea level occurs in October, whilst the minimum is observed in April. The steric effect is the cause of this annual cycle. The Northern French shelf/slope presents intense variability which is likely due to internal tides. Some areas of the ocean basin are also characterised by intense variability, due to the presence of eddies.The Eddy Kinetic Energy, in turn, is higher from December to May, than during the rest of the year and presents a weak positive trend from April 1995 to April 2005. Several documented mesoscale events, occurring at the end of 1997 and during 1998, are analysed. Altimetry maps prove to be a useful tool to monitor swoddy-like eddies from their birth to their decay, as well as the inflow of seasonal slope water current into the southeastern corner of the Bay of Biscay.     

Distribution of plankton lipids and their role in the biological transformation of Antarctic primary production

Production and transfer of lipid through the Antarctic food web is reviewed for the Indian Ocean sector. The slow settling fine particles showed a marked inter-annual variability in biochemical composition with an increase in lipid content as % organic carbon. Comparison of the fatty acid spectra of different size categories of organic particles indicated that fine particles are dominated by saturated, monoenoic and branched acids, while larger material (50–100 μm, 200–500 μm net collected fractions) displayed a signature dominated by polyunsaturated acids. Zooplankton taxa displayed different strategies of lipid accumulation. Lipid content was highest in Thysanoessa macrura females and copepodite stages of Calanus propinquus. Relatively low levels were recorded for juveniles and male stages of euphausiids. Reserve lipids varied with species: C. propinquus showed equal content of triglycerides and wax esters, T. macrura showed a dominance of wax esters and Euphausia superba and Themisto gaudichaudii accumulated only triglycerides. Computed as carbon equivalent and integrated over 200 m, lipids in slow settling particles represented 22.6% of annual primary production. Similar computation with mesozooplankton and E. superba data on biomass and population structure from several summer cruises indicated values of carbon accumulation as lipid reserves and egg production of 4.2 and 0.1% of annual primary production for copepods and 4.4 and 3.8% for E. superba. When all trophic levels are considered, the overall mean exceeded 30% of annual primary production.     

Intercity rail services: A nested logit stated choice analysis of pricing options

There is a renewed interest in intercity and long-distance rail services in many countries, with both new high-speed rail services and improvements to conventional rail under review. The current study reports on an investigation using a stated choice experiment, of the demand for sleeper services between Sydney, Northern New South Wales (NSW) and Brisbane in Australia, a 12 to 14 hour trip, just after a decision by the NSW government to temporarily suspend sleeper services and introduce seating service only, pending an inquiry into the demand for such loss-making services under alternative price and service levels. A matrix of direct fare elasticities within the rail mode and between rail and competing modes are obtained for concession and non-concession travellers from a nested logit model. The empirical evidence extends our knowledge of the sensitivity of the long distance passenger market to a range of rails fares, distinguishing between classes of fares and levels of service.     

焊轨机的发展前景

本文介绍了能够解决现代钢轨,包括电炉钢钢轨,在使用线路焊轨机进行焊接工作时发生焊接问题的新工艺、新技术和新装备。     

An aggregate demand model for intercity passenger travel in Sri Lanka

Inspite of the inherent weaknesses in aggregate demand models, they continue to be used in everyday applications, especially in developing countries. The largely data intensive disaggregate model preclude its application in many cases. This paper attempts the formulation and calibration of an aggregate total demand model for estimating inter-district passenger travel by public transport in Sri Lanka. In its process, an investigation is made of the common problems in the aggregate approach while examining possible remedial measures to improve the accuracy and (hence) the usability of the aggregate model. It is argued that commonly used variables and functional forms are inappropriate for making accurate estimates in developing countries. Consequently, the model calibration is shown to incorporate variables representing urbanisation, under-development, transfers, a mode-abstract cost function and intrinsic features. The necessity for functional form for each variable to be based on behavioral assumptions that are tested using the Box-Cox transformation for ensuring the best fit of the data is also observed. Although, the model form was calibrated for Sri Lanka, the model is generalised in order for its applications to other countries as well as, both, inter-district and intercity travel demand estimation.     

How much do people value the environment?

The selection and evaluation of road schemes through the Leitch framework is based on a combination of cost-benefit analysis and environmental impact assessment. Both techniques involve the definition and valuation of a number of costs and benefits. These costs and benefits are defined and valued in isolation to each other so that we know virtually nothing about the relative valuation that people assign to different types of costs and benefits which might affect them directly or indirectly. This paper outlines the development of a method which allows people to conceptualise the costs and benefits of a road scheme in their own terms and then to rank schemes in relation to those costs and benefits. This method is based upon an interview process involving the use of repertory grid technique. The information from the repertory grid technique is used as a sound basis for determining trade-offs between attributes and for attempting to obtain monetary valuations of different project attributes. A number of exploratory interviews are reported which outline some of the difficulties with a number of the survey features including the choice of case-study, interviewer and information biases and sample and non-response biases. Various ways of dealing with these difficulties are discussed.     

Exploration of route choice behavior with advanced traveler information using neural network concepts

A model of driver's route choice behavior under advanced traveler information system (ATIS) is developed based on data collected from learning experiments using interactive computer simulation. The experiment subjected drivers to 32 simulated days in which they were to choose between the freeway or a side road. A neural network model is used as a convenient modeling technique in this initial phase of the analysis. The results indicated that most subjects made route choices based mainly on their recent experiences. It was also demonstrated that route choice behaviors are related to the personal characteristics as well as the characteristics of the respective routes. Travel experiences have less effect on the choice of the side road compared to the freeway and the results indicate that the prediction accuracy of the model, the acceptance rate of advice, and the quality of advice are closely correlated. The model developed here was for advice consistently provided at a level of 75 percent accuracy. The paper concludes with a discussion of experimental limitations and suggestions for future research.     

Optimal Control of Four Wheel Steering Vehicle

This paper derives a method of controlling four wheel steering using optimal control theory. The purpose of control is to minimize the sideslip angle at the center of gravity. The control method feeds forward the steering wheel angle and feeds back the yaw velocity and the sideslip angle to the front and rear wheel angles. Theoretical studies show that the sideslip angle is reduced to zero even in the transient state, and that the understeer characteristic and frequency response can be changed regardless of the vehicle static margin. This Paper also examines various characteristics of the influence of the side force nonlinearities of tires and crosswinds.