On-board aging estimation using half-cell voltage curves for LiFePO<Subscript>4</Subscript> cathode-based lithium-ion batteries for EV applications

The aim of this work is the design of an algorithm for on-board determination of the actual capacity of a lithium iron phosphate (LFP) cathode-based lithium-ion battery for electric vehicle applications. The presented approach is based on the detection of the predominant aging mechanisms (in terms of loss of lithium and loss of active material in both electrodes) by determining the single electrode voltage curves. The information related to the characteristic length and position of the voltage plateaus, which can be gathered during battery operation, can be used to obtain the actual aging state of the cells. The length of the plateaus depends on the respective position that the voltage curves of the single electrodes have in relation to each other. Relating the change of the plateau characteristics to the possible aging mechanisms allows the determination of the actual battery aging state in terms of total cell capacity. The work presents a possible implementation of an algorithm for capacity determination based on the described methodology. The algorithm is validated with various differently aged LFP cells. Furthermore, the work discusses the ability of the method to detect the actual battery capacity if the characteristics of only part of the quasi-OCV (open circuit voltage) curve are detected. Achieved accuracy and existing limitations are described and discussed in detail.     

Designing a sliding mode controller for slip control of antilock brake systems

Antilock brake system (ABS) has been designed to achieve maximum negative acceleration by preventing the wheels from locking. Research shows that the friction between road and tire is a nonlinear function of wheel slip. Therefore, maximum negative acceleration can be achieved by designing a suitable control system for wheel slip regulation at its optimum value. Since there is a lot of nonlinearity and uncertainty (uncertainty in mass and center of gravity of the vehicle and road condition) in vehicle dynamics, a robust control method should be used. In this research, a sliding mode controller for wheel slip control has been designed based on a two-axle vehicle model. Important considered parameters for vehicle dynamic include two separated brake torques for front and rear wheels as well as longitudinal weight transfer caused by the acceleration or deceleration. One of the common problems in sliding mode control is chattering phenomenon. In this paper, primary controller design has been improved using integral switching surface to reduce chattering effects. Simulation results show the success of integral switching surface in elimination of chattering side effects and by high performance of this controller. At the end, the performance of the designed controller has been compared with three of the prevalent papers results to determine the performance of sliding mode control integrated with integral switching surface.     

Discussing the “positive utilities” of autonomous vehicles: will travellers really use their time productively?

ABSTRACT

Autonomous vehicles (AVs) are expected to reshape travel behaviour and demand in part by enabling productive uses of travel time—a primary component of the “positive utility of travel” concept—thus reducing subjective values of travel time savings (VOT). Many studies from industry and academia have assumed significant increases in travel time use and reductions in VOT for AVs. In this position paper, I argue that AVs’ VOT impacts may be more modest than anticipated and derive from a different source. Vehicle designs and operations may limit activity engagement during travel, with AV users feeling more like car passengers than train riders. Furthermore, shared AVs may attenuate travel time use benefits, and productivity gains could be limited to long-distance trips. Although AV riders will likely have greater activity participation during travel, many in-vehicle activities today may be more about coping with commuting burdens than productively using travel time. Instead, VOT reductions may be more likely to arise from a different “positive utility”—subjective well-being improvements through reduced stresses of driving or the ability to relax and mentally transition. Given high uncertainty, further empirical research on the experiential, time use, and VOT impacts of AVs is needed.     

Assessing the employment agglomeration and social accessibility impacts of high speed rail in Eastern Australia

There is growing interest in establishing additional evidence, under the umbrella of the wider economy impacts of transport infrastructure projects, to support transport projects in general and public transport projects in particular that struggle to obtain benefit–cost ratios sufficient to gain the support of financial agencies. This paper focuses on one element of wider economy impacts, often referred to as effective economic (employment) density or employment agglomeration impacts, and another, less usually identified, social accessibility impact (SAI) which we refer to as effective social density, which in broad terms provide, correspondingly, evidence of the potential gains in work-related output (often referred to as productivity gains) and potential gains in non-work-related outputs. Both are associated with gains in individual and household benefit attributable to improved accessibility to services linked with populations and particular locations. The SAIs may capture some of the induced benefits in those jurisdictions where these are included routinely in benefit–cost analysis, and the methodology here is most appropriate to those settings where an existing calibrated demand curve may not be available. Using the proposed high speed rail (HSR) project between Sydney and Melbourne as the empirical setting, we identify economic agglomeration and social accessibility benefits for work and non-work related activity respectively. We find the former to be relatively small compared to the significant gains associated with non-work related travel activity, suggesting the greatest benefits associated with HSR, especially for those residents outside of the major metropolitan areas, will be non-work related travel activity.     

Policies towards suburban rail services in Britain and the federal republic of Germany — a comparison

This paper compares the major role played by suburban rail (S‐Bahn) systems in West German cities with the much more limited role of rail in the British conurbations. Clearly, the difference owes much to the institutional and financial arrangements in the two countries. In West Germany, large amounts of earmarked funds have been available for rail investment, whilst the Federal government has been willing to shoulder much of the burden of operating subsidies. The Verkehrsverbund has emerged as a highly effective way of coordinating fares and services without direct ownership of any mode of transport. By contrast in Britain funds for rail investment have been much more limited. Progress with integration has been far slower, and is threatened by current government policies regarding both bus deregulation and the abolition of the Metropolitan county councils. Whilst rail is firmly established in German cities, its future in Britain looks bleak.     

Transport and nation‐state governments: a global review

The review undertaken in this paper shows how, at the beginning of 1988, nation‐states of the world allocated ministerial responsibilities for the important function of transport. A total of 118 countries are examined, compared with 111 in 1982 (Transport Reviews, Vol. 2, No. 4) and 115 in 1985 (Transport Reviews, Vol. 5. No. 1). The analysis reveals an increase in the number of ministers solely responsible for one mode of transport, and notes an increase in the number of designated ministers for tourism. The paper goes on to examine the two main duties of ministers of transport: safety and economic regulation; and of the increasing need for closer international co‐operation as new transport technology, the growing demand for travel and expanding world trade make our world ‘an even more local village’ in the decades to come.     

Roadmap for free-floating bikeshare research and practice in North America

ABSTRACT

The deployment of smartphone-operated, non-station-based bicycle fleets (“dockless” or “free-floating” bikeshare) represents a new generation of bikesharing. Users locate bikes in these free-floating systems using Global Positioning Systems (GPS) and lock bikes in place at their destinations. In this paper, we review current free-floating bikesharing systems in North America and discuss priorities for future research and practice. Since launching in 2017, free-floating bikeshare has expanded rapidly to encompass 200+ systems operating 40,000+ bikes within 150+ cities. In contrast with previous systems, free-floating systems operate almost exclusively using commercial “for-profit” models, amidst concerns of financial sustainability. Governance for these systems is in early stages and can include operating fees, fleet size caps, safety requirements, parking restrictions, data sharing, and equity obligations. We identify research and practice gaps within the themes of usage, equity, sharing resources, business model, and context. While some existing bikesharing literature translates to free-floating systems, novel topics arise due to the ubiquity, fluidity, and business models of these new systems. Systems have numerous obstacles to overcome for long-term sustainability, including barriers common to station-based systems: limited supportive infrastructure, equity, theft or vandalism, and funding. Other unique obstacles arise in free-floating bikeshare around parking, sidewalk right of ways, varied bicycle types, and data sharing. This review offers background in and critical reflection on the rapidly evolving free-floating bikeshare landscape, including priorities for future research and practice. If concerns can be overcome, free-floating bikeshare may provide unprecedented opportunities to bypass congested streets, encourage physical activity, and support urban sustainability.     

Airport ground transportation management: moving towards the turn of the century

Over the last fifty years ground transportation management (GTM) has slowly evolved into a major function at most larger airports. However, during this time there has been relatively little written discussing the idea, organization structures or duties included within this functional activity. This paper reviews and updates the limited, earlier research. This study replicates initial work done in 1989 and thus provides a short longitudinal view of the airport GTM function. The final results demonstrate the current position of GTM and suggest trends for the future.     

Microeconomic theory and generalised cost

In a number of articles in this journal the use of generalised cost in travel demand analysis and transport planning has been subject to debate. However, some of the fundamental problems raised in these articles are left unanswered — e.g., the precise relationship between conventional microeconomic consumer demand theory and generalised cost, an issue with which this article is concerned. It is shown here that necessary and sufficient conditions for expressing travel demand in terms of generalised cost are that this cost, when measured in monetary units, is linear, and that the time variable is weighted by a constant marginal value of time. It is also shown that these conditions imply strong assumptions about the consumer's behaviour — e.g., that the willingness to pay to save time whilst travelling is not a function of real income.