Assessing the employment agglomeration and social accessibility impacts of high speed rail in Eastern Australia

There is growing interest in establishing additional evidence, under the umbrella of the wider economy impacts of transport infrastructure projects, to support transport projects in general and public transport projects in particular that struggle to obtain benefit–cost ratios sufficient to gain the support of financial agencies. This paper focuses on one element of wider economy impacts, often referred to as effective economic (employment) density or employment agglomeration impacts, and another, less usually identified, social accessibility impact (SAI) which we refer to as effective social density, which in broad terms provide, correspondingly, evidence of the potential gains in work-related output (often referred to as productivity gains) and potential gains in non-work-related outputs. Both are associated with gains in individual and household benefit attributable to improved accessibility to services linked with populations and particular locations. The SAIs may capture some of the induced benefits in those jurisdictions where these are included routinely in benefit–cost analysis, and the methodology here is most appropriate to those settings where an existing calibrated demand curve may not be available. Using the proposed high speed rail (HSR) project between Sydney and Melbourne as the empirical setting, we identify economic agglomeration and social accessibility benefits for work and non-work related activity respectively. We find the former to be relatively small compared to the significant gains associated with non-work related travel activity, suggesting the greatest benefits associated with HSR, especially for those residents outside of the major metropolitan areas, will be non-work related travel activity.     

Analysis of train derailment after hitting the pier of tongling yangtze river bridge combined road with railwayEI北大核心

Research purposes: Precise prediction for mechanical behavior of the bridge under ship collision force is important to assess the analysis of train derailment after hitting the pier. This paper focuses on the Tongling Yangtze River Bridge Combined Road with Railway for ship collision simulation, uses the nonlinear finite element software of ANSYS/LS-DYNA to simulate the ship's bow section of 10000 t and 5000 t class hitting bridge tower column at front and axle to 20° of side in highest navigable water level, conventional navigable water level and the minimum navigable water level. Curves of collision force-period at different working conditions are summarized. On this basis, when the impact load affects as input loads, the displacement and acceleration response can be used by finite element analysis under the collision and study the dynamic response of the bridge caused by a train derailment risk. Research conclusions: (1) The impact force of the bridge is largest when a laden ship is hitting the pier at the highest navigable water level. In the most unfavorable condition, the collision have lardge impact on bridge structure and derailment risk of trains. (2) The transverse acceleration of the girder on the top of 2# pier can reach to 0.922 m/s2, but it does not exceed acceleration excitation limit (1 m/s2) when 3# piers are hitted by the 10000 t ship at the peak load of collision, so the probability of train derailment is minimal. (3) Based on the probability formula of the derailment by simplifying risk criteria, the derailment probability of train is 9×10-5~1.5×10-4 during the ship-bridge collision. (4) The research results can provide the reference for train traffic safety on railway bridge caused by ship collisions.     

A network equilibrium approach for modelling activity-travel pattern scheduling problems in multi-modal transit networks with uncertainty

An understanding of the interaction between individuals’ activities and travel choice behaviour plays an important role in long-term transit service planning. In this paper, an activity-based network equilibrium model for scheduling daily activity-travel patterns (DATPs) in multi-modal transit networks under uncertainty is presented. In the proposed model, the DATP choice problem is transformed into a static traffic assignment problem by constructing a new super-network platform. With the use of the new super-network platform, individuals’ activity and travel choices such as time and space coordination, activity location, activity sequence and duration, and route/mode choices, can be simultaneously considered. In order to capture the stochastic characteristics of different activities, activity utilities are assumed in this study to be time-dependent and stochastic in relation to the activity types. A concept of DATP budget utility is proposed for modelling the uncertainty of activity utility. An efficient solution algorithm without prior enumeration of DATPs is developed for solving the DATP scheduling problem in multi-modal transit networks. Numerical examples are used to illustrate the application of the proposed model and the solution algorithm.     

Dynamic system‐optimal traffic assignment for a city using the continuum modeling approach

This paper presents a continuum dynamic traffic assignment model for a city in which the total cost of the traffic system is minimized: the travelers in the system are organized to choose the route to their destinations that minimizes the total cost of the system. Combined with the objective function, which defines the total cost and constraints such as certain physical and boundary conditions, a continuum model can be formulated as an optimization scheme with a feasible region in the function space. To obtain an admissible locally optimal solution to this problem, we first reformulate the optimization in discrete form and then introduce a heuristic method to solve it. This method converges rapidly with attractive computational cost. Numerical examples are used to demonstrate the effectiveness of the method. Copyright © 2013 John Wiley & Sons, Ltd.     

A review of shipboard large-scale energy storage systems北大核心CSCD

储能系统是船舶中的重要设备,可为各类船舶负荷提供能源。随着电力推进技术的成熟,全电船舶已成为未来船舶设计的主要方向。在此背景下,储能系统将由主要为辅助负荷供能逐步发展到为多类型船舶负荷供能,特别是作为船舶动力系统的重要组成部分与各类船舶主/辅机配合,在满足船舶各类负荷需求的前提下提高船舶的经济/环保特性。功能角色的转变加速了大规模储能系统接入船舶,带来了储能系统的状态估计、能量管理、优化规划等一系列问题。首先,对目前的储能技术进行分类;然后,介绍典型全电船舶的分类方法并指出储能系统的应用场景;最后,提出大容量储能系统接入船舶后带来的若干亟待解决的技术问题,即船舶储能系统分布式控制、船舶储能系统适应性规划与优化,以及船舶储能系统状态评估。所做研究可为未来大规模储能系统在电力化船舶上的应用研究提供参考方向。     

Optimize combustion of compressed natural gas engine by improving in-cylinder flows

In order to solve the problem of slow flame propagation in a spark-ignition engine fueled with compressed natural gas (CNG), the influence of in-cylinder flows on combustion process was investigated in CA6SE3-21E4N CNG-engine by means of numerical simulation and experiment. The status of in-cylinder flows from intake to expansion stroke was described by computational fluid dynamic tool, which revealed that the in-cylinder flows were one of the main reasons of slow burning rate. Therefore, a special-shaped combustion chamber called Cross was used to improve the in-cylinder flows. The results showed that peak turbulent kinetic energy of Cross was 43.9% higher than that of original combustion chamber called Cylinder during the late compression period at 1450 rpm 100% load. The combustion parameters, brake specific fuel consumption (BSFC) and regulated emissions were obtained by means of experiment. At 1450rpm 25%, 50%, 75% and 100% load conditions, the ignition delay of Cross was longer than that of Cylinder, moreover, the Cross produced averagely 5.75°CA shorter combustion duration. The BSFC of Cross was on an average of 4.3% reduction at 1450 rpm as well as the HC and CO emissions were reduced whereas the NOx emissions were significantly increased.     

Thermal anaysis of an electric water pump for internal combustion engine vehicles

An electric water pump for engine cooling system has an advantage which particularly in the cold start, the use of the electric water pump saves fuel and leads to a corresponding reduction in emissions. However, the electric water pump for internal combustion engine generates much more heat loss than that for hybrid electric vehicle or electric vehicle since it is operated by electric power of high current and low voltage. In this study, the fluid flow and thermal characteristics of the canned type electric water pump with an inverter integrated has been investigated under the effects of heat generation. The analysis conditions such as outdoor air temperature of 125°C, water pump speed of 6000 rpm, coolant temperature of 106°C and coolant flow rate of 120 L/min were used as a standard condition. Therefore, the thermal performance of the canned type electric water pump’s motor and inverter was evaluated by comparison with that of mechanical seal type. In the motor, the temperature reduced by over 10°C, and in the inverter, the amount of temperature decrease equaled to the maximum temperature difference, about 18.7°C. Also, canned type electric water pumps of variable materials were compared for the evaluation of thermal transfer performance for variable thermal conductivity of a can. The motor and inverter were cooled lower to 42°C at motor and about 40°C at inverter for reasonable selection of can’s thermal conductivity.     

Vibration path analysis and optimal design of the suspension for brake judder reduction

Brake judder is abnormal vibration, which is mainly generated by uneven contact between the brake disc and pad. The abnormal vibration from BTV (Brake Torque Variation) is transferred to the suspension and the steering system during braking. In this paper, judder simulation is carried out using a multi-body dynamic analysis program to analyze the relationship between judder and the transfer mechanism, which consists of the suspension and the steering system. In order to verify the analytical model, test results are compared with the simulation results. A sensitivity analysis is also carried out. In addition, an optimization method is presented for judder reduction, using the design of experiments.     

Study on the performance of active front steering system

The performance of a steering system equipped with active front steering (AFS) device is investigated with the consideration of AFS intervention and a proposed dynamic model. Firstly, the kinematics and dynamics of AFS are illustrated based on the mechanism of AFS with planetary gear set and a detailed dynamic model. Furthermore, a basic control on the voltage of DC motor at AFS actuator is proposed. It is realized by a proportional controller that the input is the difference of desired steering ratio and a conventional gear ratio. Finally, two numerical simulations are carried out. One is on-center handling test to demonstrate the basic characteristics of AFS. The other simulation is to demonstrate the effects of vehicle speed, frequency of steering input and AFS intervention on steering system performance. It is shown that the proposed AFS dynamic model is capable to simulate dynamic performance of AFS. The effect of AFS intervention on turning efforts at hand steering wheel is inevitable and the turning comfort is deteriorated to some extent.     

Improved hot-stamping analysis of tubular boron steel with direct measurement of heat convection coefficient

There are two types of hot-stamping processes, direct and indirect, depending on the sequence of the heating, forming, and quenching steps and the method used for each step. In this study, an indirect hot-stamping process consisting of forming at room temperature, heating, and water quenching was applied to develop a coupled torsion beam axle. The analysis results indicated that the application of the heat convection coefficient is critical in the simulations and must take into account the temperature and specific location in the model to ensure the accuracy of the heating and quenching analysis. The heat convection coefficients used in the analysis were directly measured at various positions of the tube (e.g., outside, inside, and bending region) using thermocouples, and the final values were determined through correlation between the actual tests and numerical analysis. The experimental and simulated final deformed shape and temperature distribution were in good agreement.