Building Philippine Local Government Capacity for Coastal Resource Management

The responsibility for managing coral reefs and other coastal resources was largely devolved to coastal municipalities and cities in the Philippines in 1991 with the passage of the Local Government Code. Devolution of powers and responsibilities to local government has paved the way for mainstreaming coastal resource management at the local level. However, the capacity to carry out this mandate has only recently begun to mature as municipalities and cities gain an increased awareness of the importance of coastal resources to communities and economic development. Approaches and strategies to increase local government capacity for coastal resource management are described based on the experiences of the Coastal Resource Management Project of the United States Agency for International Development. Qualitative and quantitative data are used to illustrate the possible impact of these capacity building efforts and to describe the current capacity of local government to undertake coastal resource management. After five years of project implementation, coastal municipalities have increased technical capacity, have allotted financial resources, and have achieved key performance benchmarks in the delivery of coastal resource management as a basic service.     

The dredging dilemma: Economic development and environmental protection in Oakland Harbor

Abstract

Seaport expansion often generates tensions between the national interest in efficient transport and local interests in water quality and habitat preservation. The governing American permitting system, however, establishes an extraordinarily cumbersome, legalistic, and costly method for balancing environmental and economic considerations. A case study of the Port of Oakland illustrates the tendency. For four years, plans to find an environmentally acceptable site for dredged material have been stymied by a sequence of inconclusive regulatory and judicial proceedings. Meanwhile, large container ships can enter and leave Oakland harbor only at high tide, and not fully loaded. Despite the absence of any authoritative determination concerning environmental risks, the port was compelled to accede to progressively more expensive disposal methods. Such “adversarial legalism”; is not unique to the Oakland harbor case, but recurs in other policy spheres. It stems from a governmental structure that fragments decision‐making power among many agencies, that constrains regulatory discretion with legal demands for scientific certainty, and that by allowing agency decisions to be challenged readily in court, encourages legalistic defensiveness and extortion rather than compromise. The article concludes with a discussion of the conditions under which regional planning bodies might overcome these centrifugal tendencies.     

Service-oriented computing and model-driven development as enablers of port information systems: an integrated view

Port information management is considered a critical instrument towards enabling international transport and trade; thus, various forms of Port Information Systems (PORTIS) have been developed today, namely Port Community Systems, Terminal Operating Systems and Single Window systems. In Europe, the nautical information system SafeSeaNet is viewed as an important e-infrastructure. PORTIS systems are expected to evolve into next-generation technological platforms in order to offer a fully integrated digital environment to a multitude of maritime business actors and public authorities towards more efficient, safe and environment-aware transport and trade infrastructures and services. We propose service-oriented computing and model-driven development techniques as a robust PORTIS modelling and development approach. We present a reference model of PORTIS and a particular enabling methodological and technological framework. The proposed approach has been tested in a maritime single-window case.     

In-car power line communications: Advanced transmission techniques

The increasing number of electronic control units (ECUs) inside a vehicle implies the need to develop and deploy on board robust, low latency and low complex telecommunication systems. In this respect, power line communications (PLC) is an attractive solution. The benefits provided by the introduction of power line communications in the in-car environment are multiple and they are related to the possibility of exploiting the existing and capillary wiring infrastructure to simplify the design of the in-vehicle data network (IVN) and, more importantly, to save weight and cost of the wiring harness. In this paper, we deal with the analysis of the performance achievable by applying innovative advanced modulation techniques to in-car measured power line channels, i.e., multicarrier (MC) and impulsive ultra wideband (I-UWB) modulation. We show that for low speed command and control applications, I-UWB is suitable since it requires lower power and lower computational efforts w.r.t. MC systems. Furthermore, we study the design of the optimal transmitted pulse to further improve the performance of I-UWB.     

Effect of rear slant angle on vehicle crosswind stability simulation on a simplified car model

It is important to know the effect of the aerodynamic forces and moments on driving stability because it is responsible for the excitation and influences the response of the vehicle. The purpose of this paper is to study the effect of rear slant angle of a surface vehicle on crosswind sensitivity for stability analysis. The vehicle mathematical model used to conduct a dynamic simulation was based on a simple reduced order lateral dynamics of sideslip and yaw rate motion coupled with aerodynamics model. The intention here is to compare the effect of rear slant angles response to crosswind and to rank the crosswind sensitivity ratings. The aerodynamic loads are defined as the function of the aerodynamic derivatives from the static wind tunnel tests. Result shows a 20° rear slant angle demonstrates the highest rating of crosswind sensitivity, while zero degree slant exhibits the least.     

CFD Analysis of Ship-to-Ship Hydrodynamic Interaction

A numerical study of ship-to-ship interaction forces is performed using a commercial CFD code, and the results are compared with experimental data and with the results of a panel method analysis. Two ship models have been used in the interaction forces analysis: a tug and a tanker, advancing parallel to each other with different lateral distances and two different values of the fluid depth. Computations are carried out with four different flow models: inviscid and viscous flow with the free surface modeled as a rigid wall and inviscid and viscous flow with the deformable free surface. A fair agreement was obtained with available experimental data and results obtained by panel method. The influence of viscosity in the computations is found to be comparatively weak, while the wavemaking effects may be important, at small magnitude of the horizontal clearance.     

The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

Quasi-two-dimensional flow on the polar β-plane: Laboratory experiments

Geophysical turbulence is strongly affected by the variation of the Coriolis parameter with latitude. This variation results in the so-called β-effect, which forces energy from small-scales to be transferred preferentially into zonal motions. This effect results in the formation of narrow jet-like zonal flows that dominate the dynamics and act as transport barriers. Here, laboratory experiments are used to reproduce this effect in decaying turbulent flows. An electromagnetic cell is used to generate an initial field of vorticity in a rotating tank. Under conditions of quasi-geostrophic flow, the β-effect is produced by depth variation of the flow instead of variation of the Coriolis parameter. The effects of changing the container geometry and the overall fluid depth on the production of jets are investigated. The results suggest that this laboratory configuration can be used to model jet formation in the oceans and that increasing fluid depth is a practical way to decrease viscous effects.     

The importance of oceanographic fronts to marine birds and mammals of the southern oceans

During the last 30 years, at-sea studies of seabirds and marine mammals in the oceans south of the Subtropical Front have described an association with major frontal areas. More recently, the advancement in microtechnology has allowed the tracking of individuals and investigations into how these marine predators actually use the frontal zones. In this review, we examine 1) the relative importance to apex predators of the different frontal zones in terms of spatial distribution and carbon flux; 2) the processes that determine their preferential use; and 3) how the mesoscale dynamics of frontal structures drive at-sea foraging strategies of these predators. We review published results from southern waters and place them in a broader context with respect to what has been learned about the importance of fronts in oceans farther north.Some fronts constitute important boundaries for seabird communities in southern waters. At a mesoscale the maximum values of seabird diversity and abundance correspond to the location of the main fronts. At-sea surveys show a strong curvilinear correlation between seabird abundance and sea surface temperatures. High mean species richness and diversity for whales and seabirds are consistently associated with the southern water mass boundary of the Antarctic Circumpolar Current, the Subtropical Front and the Subantarctic Front; in the case of the Polar Front mean seabird densities are more variable. At small-scales, variation in seabird occurrence has been directly related to the processes at fronts in a limited number of cases. A significant positive relation was found between some plankton feeding species and frontal temperature gradient–phytoplankton variables.Telemetric studies have revealed that several apex predators (penguins, albatrosses, seals) perform long, directed foraging trips either to the Subtropical front or Polar Front, depending on locality. Seabirds with low flight costs, such as albatrosses, are able to reach fronts at long distances from colonies, showing variable foraging strategies as a function of the distances involved. Diving birds such as King penguins, that travel at a higher cost and lower speed, rely on the predictable spatial distribution of mesopelagic fish found close to the Polar Front. They may use the currents associated with eddies as oceanographic cues in the active search for frontal zones. Once in these areas they dive preferentially in and below the depth of the thermocline where catches per unit effort are high. Elephant seals concentrate foraging activity principally inside or at the boundary of cyclonic eddies. These mesoscale features appear to offer exceptional productivity favourable for foraging by various diving top predators.The connection between biophysical parameters at fronts and predators is likely to be made through biological enhancement. Top predators appear to forage at locations where prey are advected by physical processes and others where prey are produced locally. Long-term research on at-sea distributions and demographic parameters of top predators are essential to assess the consequences of potential shift in front distributions in relation to global warming. Such environmental changes would add to the impact of fish extraction by the industrial fisheries on the southern food webs.     

Development of railway station choice models to improve the representation of station catchments in rail demand models

ABSTRACT

This paper describes the development of railway station choice models suitable for defining probabilistic station catchments. These catchments can then be incorporated into the aggregate demand models typically used to forecast demand for new rail stations. Revealed preference passenger survey data obtained from the Welsh and Scottish Governments was used for model calibration. Techniques were developed to identify trip origins and destinations from incomplete address information and to automatically validate reported trips. A bespoke trip planner was used to derive mode-specific station access variables and train leg measures. The results from a number of multinomial logit and random parameter (mixed) logit models are presented and their predictive performance assessed. The models were found to have substantially superior predictive accuracy compared to the base model (which assumes the nearest station has a probability of one), indicating that their incorporation into passenger demand forecasting methods has the potential to significantly improve model predictive performance.