Static and Dynamic Stability of Unsymmetric Two-Axle Railway Vehicles Possessing Perfect Steering

For railway vehicles having coned wheels mounted on solid axles, there is a conflict between the stability of lateral deviations from the motion along the track and the ability to steer round curves. A general theory is developed for the two-axle vehicle in which there is a lack of symmetry, fore-and-aft, both of the interwheelset structure and of the equivalent conicities of the wheelsets. It is shown that whilst parameters can be selected which provide static and dynamic stability and perfect steering for both directions of motion, there is a lightly damped mode of oscillation for any practical configuration and the significance of this is discussed.     

Review on characterization of nano-particle emissions and PM morphology from internal combustion engines: Part 1

This paper is review of the characterization of exhaust particles from state-of-the-art internal combustion engines. We primarily focus on identifying the physical and chemical properties of nano-particles, i.e., the concentration, size distribution, and particulate matter (PM) morphology. Stringent emissions regulations of the Euro 6 and the LEV III require a substantial reduction in the PM emissions from vehicles, and improvements in human health effects. Advances in powertrains with sophisticated engine control strategies and engine after-treatment technologies have significantly improved PM emission levels, motivating the development of new particle measurement instruments and chemical analysis procedures. In this paper, recent research trends are reviewed for physical and chemical PM characterization methods for gasoline and diesel fueled engines under various vehicle certification cycles and real-world driving conditions. The effects of engine technologies, fuels, and engine lubricant oils on exhaust PM morphology and compositions are also discussed.     

Hybrid neural network model for history-dependent automotive shock absorbers

The method of numerical multi-body simulation is an often used and well-understood development tool in the automotive industry. In order to reproduce the ride comfort or handling behaviour of vehicles, mathematical models have to be built up. To achieve accurate simulation results, highly detailed component models are required. However, the formulation of appropriate physically-based model equations of complex automotive components (e.g. air springs, shock absorbers, rubber bearings, tyres, etc.) can be very difficult. To handle this, empirical modelling methods have been developed. Simple algebraic equations are used to describe complex system behaviour. This simplification is very effective, although it largely ignores the natural laws of mechanics and thermodynamics but is still capable to predict the component response. This article illustrates how to take advantage of this approach in numerical simulations. We describe the development of a hybrid automotive shock absorber model based on both spline and neural network (NN) approaches. By combining these different approaches, an accurate model is achieved without loss of variability. Non-isothermal laboratory force-displacement measurements of an automotive shock absorber are being used to estimate the parameters of the NN. As shown, the model replicates the measured data with sufficient accuracy, especially the hysteresis. Finally, we present a set of quarter-car simulations with a built-in hybrid NN shock absorber.     

Analysis of the capabilities of a two-stage turbocharging system to fulfil the US2007 anti-pollution directive for heavy duty diesel engines

This article presents a two-stage turbocharged heavy-duty diesel (HDD) engine designed to fulfil the US2007 anti-pollution directive. This directive imposes very restrictive limits on the NOx and particle emissions of HDD engines. In this work, the possibility of combining particle traps in the exhaust line to reduce soot emissions with very high EGR rates to reduce NOx emissions is considered. This new generation engine implements two-stage turbocharging in order to improve the bsfc when the engine is working on steady conditions as well as to optimize the engine transient response. After carrying out the tests, the results were analyzed and the engine settings were adjusted to maximise its behaviour and minimise pollutant emissions. NOx and soot emission peaks were also analyzed at engine transient conditions in order to keep them under certain levels, and thus maintain the overall pollutant emissions to a level that is as low as possible. In summary, a double-stage turbocharging configuration can greatly improve engine driveability (between 23% and 36% depending on engine speed), while reducing NOx emissions during transient evolution without increasing opacity peaks beyond the stated limits.     

Optimal synthesis of function generation in steering linkages

This paper presents an approach to optimize planar mechanisms for function generation synthesis. It is applied to the design of different steering linkages used in road vehicles where the Ackermann condition is formulated as the objective function. Four different mechanisms are kinematically defined and synthesized in terms of the proposed method. Limitations of the size of the elements are also considered by means of inequality constraints. Solutions are presented as the difference between desired behaviour, established by Ackermann, and actual generated performance. The results show that the accuracy achieved by the proposed procedure is satisfactory for working conditions in this type of linkages.     

High-strain-rate fracture of adhesively bonded composite joints in DCB and TDCB specimens

Double-cantilever beam (DCB) and tapered double-cantilever beam (TDCB) specimens are the test configurations most commonly used to measure the fracture toughness of composites and adhesive joints. Strain rates of 1 to 18.47 m/s were applied to the test specimens via high-speed hydraulic test equipment. Because the fracture occurs through the adhesively bonded joints and the cracks grow rapidly, the crack length and beam displacement were recorded by a high-speed camera. An energy range from 0 to 10 J was often observed in the high-strain-rate fracture experiments for nonlinear plastic behavior of the dynamically loaded adhesively bonded DCB and TDCB specimens. The range of energy release rates (fracture energy) for TDCB specimen was 2 to 3 times higher than that of a DCB specimen for all high strain rates. The fracture energy of automotive adhesive joints can be estimated using the experimental results in this study for the fracture toughness (G_IC) under high rates of loading. The crack grows as the applied fracture energy exceeds the value of the critical energy release rate (G_IC) at the crack tip. The energy release rate was calculated using the fracture mechanics formula. The key fracture mechanics parameter, the fracture energy GIC, was ascertained as a function of the test rate and can be used to assess and model the overall joint performance.     

西藏复杂地质环境下路基加宽拼接方案试验研究

针对西藏某公路的加宽改造,提出了5种新旧路基加宽拼接方案.按这5种方案,共修筑了3段试验路.对试验路的设计原则、施工要求和工艺进行了讨论.通过试验数据,对各种拼接方案的效果进行了比较分析.结果表明,用5层双向土工格栅自路基顶面向下,以层间距30 cm的加筋方式加强新旧路基间的结合是较好的路基加宽拼接方案.     

Nouveaux entrants, structure du réseau ferré et qualité des infrastructures ferroviaires en France : des stratégies d’itinéraires contrariées

The structure of the French rail network is highly centralized. It complies with the strategy of use of the incumbent operator, SNCF: the long-term trend has been rather towards the concentration of traffic on a limited number of well-equipped routes. The experience of freight market liberalization shows that seven newcomers have entered the market. They haul approximately 16% of the total volume in 2010. But they have neither the same vision of the network, nor the same use of it. They run point-to-point long-distance trains, so they try to travel via lines that are as direct as possible, thereby saving several kilometres and avoiding problematic bottlenecks. Their strategies are counteracted by the current state of the infrastructures when they try to avoid the main radial lines: limited capacity, speed and axle load restrictions, etc. Upgrading works are now in progress, under the direction of RFF, the network manager. They add perturbations to the existing restriction of use, without any satisfying alternative train path. This paper tries to emphasize the strategic divergences between operators confronted with a time-consuming (or insufficiently anticipated) network.