Accessibility in the regional CGE framework: the effects of major transport infrastructure investments in Poland

Transportation - Since its EU accession, Poland has invested strongly in the development of fast road transport network. As a result, the total length of modern, high-speed roads has increased from...     

Fuzzy logic based decision making system for collision avoidance of ocean navigation under critical collision conditions

This paper focuses on a fuzzy logic based intelligent decision making system that aims to improve the safety of marine vessels by avoiding collision situations. It can be implemented in a decision support system of an oceangoing vessel or included in the process of autonomous ocean navigation. Although Autonomous Guidance and Navigation (AGN) is meant to be an important part of future ocean navigation due to the associated cost reduction and improved maritime safety, intelligent decision making capabilities should be an integrated part of the future AGN system in order to improve autonomous ocean navigational facilities. In this study, the collision avoidance of the Target vessel with respect to the vessel domain of the Own vessel has been analyzed and input, and output fuzzy membership functions have been derived. The if–then rule based decision making process and the integrated novel fuzzy inference system are formulated and implemented on the MATLAB software platform. Simulation results are presented regarding several critical collision conditions where the Target vessel fails to take appropriate actions, as the “Give way” vessel to avoid collision situations. In these situations, the Own vessel is able to take critical actions to avoid collisions, even when being the “Stand on” vessel. Furthermore, all decision rules are formulated in accordance with the International Maritime Organization Convention on the International Regulations for Preventing Collisions at Sea (COLREGs), 1972, to avoid conflicts that might occur during ocean navigation.     

Dynamic motions of planing vessels in head seas

The dynamic response of planing vessels in regular head seas is investigated numerically. Nonlinear time domain simulations were performed using a 2D + t theory (two-dimensional plus time dependent theory). A prismatic hull form was assumed. We employed a two-dimensional (2D) boundary element method to solve the initial boundary value problems in 2D cross planes, in which nonlinear free-surface conditions and exact body boundary conditions were satisfied. At each time step, the total force and moment on the hull could be obtained by using the sectional forces calculated in those 2D planes. Heave and pitch motions were then acquired by solving the equations for those motions. The calculated heave and pitch responses were compared with the experiments by Fridsma (A systematic study of the rough-water performance of planing boats. Davidson Laboratory Report R-1275, 1969) for two different Froude numbers. Three-dimensional (3D) corrections at the transom stern were applied to show the influence of the 3D effect at the stern on the numerical results. Ship motions were affected by the 3D corrections, especially near the resonance frequency, while the phase angles were slightly affected and the acceleration peaks at the bow near the resonance frequency were sensitive to the 3D corrections. Other error sources in the theoretical results are also mentioned.     

Multi-fidelity optimization of a high-speed foil-assisted semi-planing catamaran for low wake

The wakes of high-speed passenger-only ferries that operated through Rich Passage, on the Seattle-Bremerton ferry route, caused beach erosion and damage to habitat. A task was initiated to design a low-wake high-speed vessel using multi-fidelity CFD based design optimization by using low-fidelity potential flow solvers for initial global design optimization and by using URANS solvers for high-fidelity tuning of the optimized design. This simulation based design process involved a close collaboration between ship designers, and hydrodynamics and CFD specialists, whose collective expertise guided the evolution of the design based on both hydrodynamic and structural aspects. The initial hull shape optimization using potential flow code was carried out by blending three different initial concepts provided by the designers. Subsequently, URANS was used to evaluate the potential flow optimized hull and to further optimize the hull configuration parameters, namely, the centre-of-gravity, demihull spacing, foil location, foil angle and slenderness ratio at different displacement conditions. The URANS based configuration optimization also took into account the far field wakes’ energy spectrum with an objective of reducing the energetic, low frequency far field wakes which are associated with beach flattening on the mixed sand and gravel beaches. Calculation of the far field wake using URANS would require an unfeasibly large domain size; therefore, a Havelock code with a source distribution matching the URANS calculated near field wave elevation was used to propagate the wakes into the far field. The end result of the optimization was a design with significantly reduced far field wake, which is currently being built for experimental testing.     

The effect of sloshing on the sway motions of 2D rectangular cylinders in regular waves

In this paper, we investigated the effect of sloshing on the sway motions of two-dimensional rectangular cylinders in regular waves, bearing in mind possible applications for LNG-FPSO and LNG-FSRU. First, we carried out experiments for two models with different drafts, or the same draft but different filling ratios, in which the models were firmly connected to each other. The sway motion was measured with a noncontact video camera. This is an extension of Rognebakke and Faltinsen’s work for a single model (J Ship Res 47(3):208–221, 2003). It was found that the sway motion became small when the incident wave frequency was close to the lowest natural frequency of each model. The sway motion greatly increased when the wave frequency was higher than this frequency. The measured data were compared with numerical results obtained by a single-dominant multi-modal method; relatively good agreement was noted. However, the numerical results deviated from the experimental results near the lowest natural frequency of the smaller model, which was believed to be due to overturning waves, as observed during the experiment. Since this is out of the valid range for the single-dominant multi-modal method, other, more appropriate, methods such as the multi-dominant modal method must be applied instead.     

Modelling multiple yacht sailing interactions between upwind sailing yachts

An approach for enhancing the realism of yacht fleet race simulations based on a lifting line method is developed. The wake of an upwind sailing yacht is represented as a single heeled horseshoe vortex and image system. At each time step, changes in vortex strength are convected into the wake as a pair of vortex line elements. These subsequently move in accordance with the local wind, the self-induced velocity and the velocity induced by the presence of the wakes of other yachts. In addition, the lifting line model has a model for the viscous wake due to the drag associated with the yacht and its sails superimposed on it. A synthesis of sail yacht wake representations based on detailed 3D Reynolds-averaged Navier–Stokes computational fluid dynamics calculations with wind tunnel test results is used to capture the initial strength of the combined main-jib vortex system and its vertical height. The implementation of the lifting line algorithm within Robo-Race, a real-time yacht race strategy analysis tool, is described. Two upwind race interaction case studies are presented, and these show that the newly implemented wake model makes an important contribution to enhancing the realism of the sailing simulation.     

On structural design of energy efficient small high-speed craft

This paper presents an integrated design procedure for determination of structural arrangement and scantlings for the complete structure of small high-speed craft. The purpose of the procedure is to serve as a tool in the preliminary design stage where it enables generation of weight minimized designs with very limited effort. The design procedure is applied in a material concept study for a high-speed patrol craft. The various concepts include single skin and sandwich composites, aluminum and steel. It is demonstrated that the mass of the aluminum hull structure can be reduced from the original 11.7 tonnes to 9.6 tonnes through application of the presented design procedure. The most weight efficient material concept is a carbon-fiber foam-cored sandwich with a structural mass of 4.8 tonnes, which is about 50% less than the refined aluminum version. Through simple hydromechanic analysis, potential for fuel and CO2 emission reductions of 8% for the refined aluminum version and 27% for the carbon-fiber sandwich version in relation to the original craft are indicated.     

Challenges in the application of spatial computable general equilibrium models for transport appraisal

The use of spatial computable general equilibrium (SCGE) models for assessing the economic impacts of transport projects is one of the key items on the research agenda for project appraisal in the Netherlands. These models are particularly suitable for analysing indirect effects of transport projects through linkages between the transport sector and the wider economy. Potentially, according to the literature, indirect effects that are additional to first-order direct cost reductions can turn out to be up to almost 80% in magnitude of the direct impacts. Given the relevance of these models for policy appraisal, experiences with this new modelling approach are important to report. After two years of development and application of SCGE models for transport appraisal, we found that the translation of theory behind the spatial equilibrium models into practical model specifications and empirical applications is a challenging task, and may lead to problems in project appraisal in terms of inaccuracies in the assessment of impacts. This paper discusses some key challenges we encountered with the specification of the Dutch SCGE model RAEM. This chapter is especially useful for researchers developing SCGE applications for use in transport appraisal and those who want to get a better understanding of differences between theoretical and computable SCGE modelling.     

The Maritime Labour Convention, 2006—reflections on challenges for flag State implementation

This paper begins by providing a brief overview of the International Labour Organization’s Maritime Labour Convention, 2006 (MLC, 2006), noting that this Convention, often called the “Seafarers’ bill of rights”, seeks to achieve both social and labour rights (“decent work”) for seafarers and fair competition (achieving a level-playing field) for shipowners. It has been described as the “fourth pillar” of the international maritime regulatory regime complementing the major International Maritime Organization conventions. The paper provides a brief update on international efforts to achieve the 30/33 formula needed to bring the Convention into force [at present, the tonnage element, 33% has been achieved already with coverage now at 54% of the world fleet (by gross tonnage), with 18 ratifications]. It then explores challenges faced by flag States in connection with capacity to implement the ship inspection and certification system under the MLC, 2006 and other difficulties with respect to legal implementation by the flag States. The paper also comments on some challenges in connection with port State, coastal State and labour-supplying State responsibilities. The paper points out that the MLC, 2006 is a comprehensive code that covers diverse issues and a wider range of both ships and seafarers than previous conventions. It often requires interdepartmental cooperation to implement its requirements at the national level. The paper concludes that, despite the slower pace of ratification in some regions, largely because of the recent economic and other crises, it appears that many actors in the maritime sector are already actively engaged in MLC, 2006 implementation, often ahead of governments. The question is not “if” but “when” the formula will be achieved to allow the MLC, 2006 to enter into force.