The structure of dissipation in the western Irish Sea front

We report on an intensive campaign in the summer of 2006 to observe turbulent energy dissipation in the vicinity of a tidal mixing front which separates well mixed and seasonally stratified regimes in the western Irish Sea. The rate of turbulent dissipation ε was observed on a section across the front by a combination of vertical profiles with the FLY dissipation profiler and horizontal profiles by shear sensors mounted on an AUV (Autosub). Mean flow conditions and stratification were obtained from a bed mounted ADCP and a vertical chain of thermistors on a mooring. During an Autosub mission of 60 h, the vehicle, moving at a speed of ~ 1.2 m s^− 1, completed 10 useable frontal crossings between end points which were allowed to move with the mean flow. The results were combined with parallel measurements of the vertical profile of ε which were made using FLY for periods of up to 13 h at positions along the Autosub track. The two data sets, which show a satisfactory degree of consistency, were combined to elucidate the space–time variation of dissipation in the frontal zone. Using harmonic analysis, the spatial structure of dissipation was separated from the strong time dependent signal at the M₄ tidal frequency to yield a picture of the cross-frontal distribution of energy dissipation. A complementary picture of the frontal velocity field was obtained from a moored ADCP and estimates of the mean velocity derived from the thermal wind using the observed density distribution. which indicated the presence of a strong (0.2 m s^− 1) jet-like flow in the high gradient region of the front. Under neap tidal conditions, mean dissipation varied across the section by 3 orders of magnitude exceeding 10^− 2 W m^− 3 near the seabed in the mixed regime and decreasing to 10^− 5 W m^− 3. in the strongly stratified interior regime. The spatial pattern of dissipation is consistent in general form with the predictions of models of tidal mixing and does not reflect any strong influence by the frontal jet.     

Quasi-two-dimensional flow on the polar β-plane: Laboratory experiments

Geophysical turbulence is strongly affected by the variation of the Coriolis parameter with latitude. This variation results in the so-called β-effect, which forces energy from small-scales to be transferred preferentially into zonal motions. This effect results in the formation of narrow jet-like zonal flows that dominate the dynamics and act as transport barriers. Here, laboratory experiments are used to reproduce this effect in decaying turbulent flows. An electromagnetic cell is used to generate an initial field of vorticity in a rotating tank. Under conditions of quasi-geostrophic flow, the β-effect is produced by depth variation of the flow instead of variation of the Coriolis parameter. The effects of changing the container geometry and the overall fluid depth on the production of jets are investigated. The results suggest that this laboratory configuration can be used to model jet formation in the oceans and that increasing fluid depth is a practical way to decrease viscous effects.     

Home-to-work commuting,urban form and potential energy savings: A local scale approach to regional statistics

The link between transport energy consumption and land use patterns has been the focus of a considerable amount of academic works over the past decades. While many empirical researches are backed up with solid statistical techniques, most of them do not fully consider the influence of scale underlying empirical quantitative investigations. Using fine-scale home-to-work commuting data for Wallonia (Belgium), this paper re-evaluates Breheny’s (1995) assertion that urban structure should hold the characteristics of major cities if substantial energy savings are to be achieved. A local scale approach highlights efficient settlements in terms of transport energy consumption not only within major towns, but also within remote rural areas. Furthermore, results suggest that influencing the urban form following local energy efficient examples rather than regional ones could also yield significant gains, without an extreme policy stance of re-urbanisation in major cities.     

An analysis of destination choice for opaque airline products using multidimensional binary logit models

We investigate how customers respond to an opaque airline product offered by a European carrier. In this opaque product design, customers are randomly assigned to travel to one of approximately ten destinations; however, for a fee they may exclude one or more destinations from the choice set (or a particular package design) prior to learning which destination they will travel to. We use a multidimensional binary logit model to predict the probability that one or more alternatives will be chosen by a customer. Results show that customers are more likely to pay to exclude destinations located close to the origin airport and destinations that speak the same language as the origin airport. Length of stay, cost of living at the destination, and measures of destination attractiveness are also found to be significant predictors for some package designs. Based on these findings, we offer general recommendations for how to design opaque packages for airline customers.     

Some Difficulties inherent in applying Congestion Theory to Marine Problems

This paper sets out to evaluate the main areas of focus within maritime sociology and to link more closely than hitherto the various substantive discussions with general theoretical and conceptual approaches. More specifically, it suggests directions in which maritime sociology may be advanced at both empirical and conceptual levels in the future.     

Developing a Spatially Enabled Inventory of Recreational Boats Using Vessel Registration Data

Effective waterway management requires information on the characteristics and locations of boats. A field-based boat census—a traditional method to obtain spatially accurate information—is relatively expensive, time-consuming, and restrictive in scope. Vessel registration data, maintained by all U.S. states, is potentially a more robust information source. This research evaluated the accuracy and reliability of vessel registration data to supply location and attribute information for boats. The study premise was to use vessel registration data, which includes the mailing address of registered boat owners, to develop a spatially enabled inventory of boats. The study area comprised 12,064 salt-water accessible property parcels in two Florida counties. An on-water census (OWC) provided location and characteristics for 5,023 vessels, which were compared to 8,681 vessel registration records linked to the study area. Discrepancies between the OWC and vessel registration data were explained by a stratified, random sample of 485 telephone survey respondents. Study results show that vessel registration data accurately located and characterized roughly 81% of the boat population; in contrast, the OWC accurately located less than 56%. A conclusion is that state vessel registration data is a better alternative than an OWC for locating and characterizing boats kept along waterways.     

Rapid first-stage tests of on-ship infection

Protection against on-ship infectious disease—whether due to mishap or to harmful purpose—faces special situational problems. Sometimes, when infection levels on board have reached threshold levels, emergency actions are required. Often, the most thorough strategies for responding to threat are not feasible. A rapid first-stage test (RFT) is a fast, minimally invasive procedure used to rule out from possible infection a large percentage of an infection-threatened group. Prevention and control of on-ship infection need to combine various interconnected tactics. When timely criterion tests are not possible, the medical team must adopt fast alternative measures. The methods used to summarize protection against on-ship infectious agents included a scientific literature review and a web search. The fields of the review were maritime, health, and technology sources. Special attention was paid to material dealing with risks and threats of on-ship penetration by infectious agents, on-ship infection prevalence thresholds, and rapid diagnostic screens. The Bayes rule and the law of large numbers were applied to the analysis, for large on-ship populations, of RFT indications of crossing of an infection prevalence threshold. The increasing risk of serious on-ship infection—either accidental or purposeful—calls for a multi-layered protection approach. RFTs are a key part of the outer layer of such a defense. Well-designed and well-administered RFTs provide several advantages for defense against on-ship infection: low-cost, non-invasive, fast, and focuses on a drastically smaller number of infection possibilities.     

The dredging dilemma: Economic development and environmental protection in Oakland Harbor

Abstract

Seaport expansion often generates tensions between the national interest in efficient transport and local interests in water quality and habitat preservation. The governing American permitting system, however, establishes an extraordinarily cumbersome, legalistic, and costly method for balancing environmental and economic considerations. A case study of the Port of Oakland illustrates the tendency. For four years, plans to find an environmentally acceptable site for dredged material have been stymied by a sequence of inconclusive regulatory and judicial proceedings. Meanwhile, large container ships can enter and leave Oakland harbor only at high tide, and not fully loaded. Despite the absence of any authoritative determination concerning environmental risks, the port was compelled to accede to progressively more expensive disposal methods. Such “adversarial legalism”; is not unique to the Oakland harbor case, but recurs in other policy spheres. It stems from a governmental structure that fragments decision‐making power among many agencies, that constrains regulatory discretion with legal demands for scientific certainty, and that by allowing agency decisions to be challenged readily in court, encourages legalistic defensiveness and extortion rather than compromise. The article concludes with a discussion of the conditions under which regional planning bodies might overcome these centrifugal tendencies.     

An improved formulation for bulk cargo ship scheduling with a single loading port

This paper presents an improved, significantly more efficient formulation of an existing model for bulk cargo or semi-bulk cargo ship scheduling problems with a single loading port. The original model, published by Ronen in 1986, was formulated as a non-linear, mixed integer program. In this work, the authors were able to re-formulate it into a linear one, by eliminating all the non-linearities of the original model. In addition, this model has far fewer integer variables than the original one. A numerical example has been given to illustrate the elimination of non-linearities and how 40 integer variables, in the original model, are reduced to just eight. This example also shows that this model is better at finding exact optimal solutions than the original one. It is also worth observing that the resulting model is a generalization of the ‘capacitated facility location problem’.