Tire wear estimation based on nonlinear lateral dynamic of multi-axle steering vehicle

This paper presents a novel nonlinear dynamic model of a multi-axle steering vehicle to estimate the lateral wear amount of tires. Firstly, a 3DOF nonlinear vehicle dynamic model is developed, including dynamic models of the hydropneumatic suspension, tire, steering system and toe angle. The tire lateral wear model is then built and integrated into the developed vehicle model. Based on the comparison of experimental and simulation results, the nonlinear model is proved to be better than a linear model for the tire wear calculation. In addition, the effects of different initial toe angles on tire wear are analyzed. As simulation results shown, the impact of the dynamic toe angle on the tire wear is significant. The tire wear amount will be much larger than that caused by normal wear if the initial toe angle increases to 1° - 1.5°. The results also suggest that the proposed nonlinear model is of great importance in the design and optimazation of vehicle parameters in order to reduce the tire wear.     

温拌技术的发展与现状

该文介绍了温拌沥青技术的发展与现状,有关经验可供专业人员参考。     

Characteristics of premium transit services that affect mode choice

This research seeks to improve the understanding of the full range of determinants for mode choice behavior and to offer practical solutions to practitioners on representing and distinguishing these characteristics in travel demand forecasting models. The principal findings were that the representation of awareness of transit services is significantly different than the underlying assumption of mode choice and forecasting models that there is perfect awareness and consideration of all modes. Furthermore, inclusion of non-traditional transit attributes and attitudes can improve mode choice models and reduce bias constants. Additional methods and analyses are necessary to bring these results into practice. The work is being conducted in two phases. This paper documents the results of Phase I, which included data collection for one case study city (Salt Lake City), research and analysis of non-traditional transit attributes in mode choice models, awareness of transit services, and recommendations for bringing these analyses into practice. Phase II will include data collection for two additional case study cities (Chicago and Charlotte) with minor modifications based on limitations identified in Phase I, additional analyses where Phase I results indicated a need, and a demonstration of the research in practice for at least one case study city.     

The cost saving potential of carsharing in a US context

Carsharing is a vehicle sharing service for those with occasional need of private transportation. Transportation planners are beginning to see great potential for carsharing in helping to create a more diversified and sustainable transport system. While it has grown quickly in the US in recent years, it is still far from the level where it can deliver significant aggregate benefits. A key element to the potential growth of carsharing is its ability to provide cost savings to those who adopt it in favor of vehicle ownership. This research seeks to quantify these potential cost savings. The costs of carsharing and vehicle ownership are compared based on actual vehicle usage patterns from a large survey of San Francisco Bay Area residents. The results of this analysis show that a significant minority of Bay Area households own a vehicle with a usage pattern that carsharing could accommodate at a lower cost. Further research is required to indentify how these cost savings translate to the adoption of carsharing.     

Estimating travel time functions for urban roads: options and issues

Travel time functions specify the relationship between the travel time on a road and the volume of traffic on the road. Until recently, the parameters of travel time functions were rarely estimated in practice; however, a compelling case can be made for the empirical examination of these functions. This paper reviews, and qualitatively evaluates, a range of options for developing a set of travel time functions. A hierarchy of travel time functions is defined based on four levels of network detail: area, corridor, route and link. This hierarchy is illustrated by considering the development of travel time functions for Adelaide. Alternative sources of data for estimating travel time functions are identified.

In general, the costs and benefits increase as the travel time functions are estimated at finer levels of network detail. The costs of developing travel time functions include data acquisition costs and analysis costs. The benefits include the potential for reducing prediction errors, the degree of application flexibility and the policy sensitivity of the travel time functions.     

Alternative fuels for transportation

The alternatives to the oil based fuels for transportation are considered and analysed. These are the synthetic fuels, made from coal, the liquid petroleum gases of propane and butane, compressed natural gas and methanol. The problems associated with the use of electric vehicles are discussed; the main problem being that of range.

The possible use of hydrogen as a fuel is analysed in some detail. Since its supply can be tied directly to nuclear energy sources, rather than hydrocarbon feed stocks, it could be an alternative in the long term. The main problems of the storage of hydrogen on the vehicle and of its propensity to “back‐fire” into the engine intake are discussed. The first can be ameliorated and the second eliminated by dual fuelling; with petrol. It is advocated that the on‐board storage of hydrogen be by the use of hydrides for private cars. However, it is expected that it may be as liquid hydrogen for some forms of transport and will certainly be in this form for aircraft.     

Measuring community reaction to urban transportation impacts using Von Neumann‐Morgenstern utility theory

This paper attempts to measure the impacts of urban transportation system improvements or changes on the community. The community's perceptions of the impacts are represented by its utilities (or disutilities) over various ranges of values of the multiple attributes representing these impacts. The utility technique used in the evaluation is based upon von Neumann‐Morgenstern (vN‐M, 1947) Utility Theory, and is applied using Raiffa's (1970) Fractile Method.

The paper specifically applies the technique to model the perceptions of five subgroups within a community to the impact of a new light rail transit system that is being incorporated in the transportation system of the City of Calgary.

Results of the modeling indicate explicitly how the community changes its perception over ranges of values of the attributes evaluated. Biases of various subgroups within the community over these attributes are also shown. Statistical tests indicate that aggregated utility perceptions can represent the utility perceptions of the individual subgroups quite reasonably.     

The design of a terminal for dangerous goods

This paper aims at examining the possibility of setting up a model terminal for the transportation of dangerous goods. It should be designed in such a manner that its use would be possible for any kind of transportation.

This consideration has been prompted by the interface between transportation planning and technology, as well as by the tendency for harmonizing international recommendations pertaining to the transportation and handling of dangerous goods, especially during the last decades where unified transport has gained ground due to the advantages provided for the safe consignment of dangerous cargoes.

Since the large increase in terminal productivity is due to the heavy investments that were effected in terminal installations and to the modernization of the administration‐management of terminals, a mathematical simulation has been adopted to assist the determination of the capacity of a terminal for dangerous goods.

It is evident that different criteria and various assumptions have been taken into account in order to facilitate a deeper analysis, without ignoring the contribution of dangerous goods to the socio‐economic development.

From the outset of the study, it was already clear that the said process will make it possible to present—as a model—a simple but well defined situation for the purpose of drawing useful conclusions.     

Dynamics of LRT growth: Karlsruhe since 1975

The public transport system of Karlsruhe, in particular its innovative services on jointly used heavy rail lines, has received substantial attention throughout the past 20 years. The discussion of the system and of its development has been rather limited in the past, mostly highlighting technical aspects. This paper provides an overview of the development, including the urban development, of the region and of the funding system. The ridership and financial development of the operator is documented in detail. Three case studies focus on the integration of the system development in the general political process of the region and demonstrate the limitations of the operator under its current ownership structures.