集装箱货运仿真模型在珠三角港港口投资方案评估

In the Pearl River Delta (PRD), there is severe competition between container ports, particularly those in Hong Kong, Shenzhen, and Guangzhou, for collecting international maritime container cargo. In addition, the second phase of the Nansha terminal in Guangzhou’s port and the first phase of the Da Chang Bay container terminal in Shenzhen opened last year. Under these circumstances, there is an increasing need to quantitatively measure the impact these infrastructure investments have on regional cargo flows. The analysis should include the effects of container terminal construction, berth deepening, and access road construction. The authors have been developing a model for international cargo simulation (MICS) which can simulate the movement of cargo. The volume of origin-destination (OD) container cargo in the East Asian region was used as an input, in order to evaluate the effects of international freight transportation policies. This paper focuses on the PRD area and, by incorporating a more detailed network, evaluates the impact of several infrastructure investment projects on freight movement.     

水火弯板残余变形预报的数值和量纲分析

Line heating process is a very complex phenomenon as a variety of factors affects the amount of residual deformations. Numerical thermal and mechanical analysis of line heating for prediction of residual deformation is time consuming. In the present work dimensional analysis has been presented to obtain a new relationship between input parameters and resulting residual deformations during line heating process. The temperature distribution and residual deformations for 6 mm, 8 mm, 10 mm and 12 mm thick steel plates were numerically estimated and compared with experimental and published results. Extensive data generated through a validated FE model were used to find co-relationship between the input parameters and the resulting residual deformation by multiple regression analysis. The results obtained from the deformation equations developed in this work compared well with those of the FE analysis with a drop in the computation time in the order of 100 (computational time required for FE analysis is around 7 200 second to 9 000 seconds and where the time required for getting the residual deformation by developed equations is only 60 to 90 seconds).     

一种基于CFD的水动力系数计算新方法

Applications of computational fluid dynamic (CFD) to the maritime industry continue to grow with the increasing development of computers. Numerical approaches have evolved to a level of accuracy which allows them to be applied for hydrodynamic computations in industry areas. Hydrodynamic tests, especially planar-motion-mechanism (PMM) tests are simulated by CFD software -FLUENT, and all of the corresponding hydrodynamic coefficients are obtained, which satisfy the need of establishing the simulation system to evaluate maneuverability of vehicles during the autonomous underwater vehicle scheme design stage. The established simulation system performed well in tests.     

船舶在规则纵浪中的混沌运动

Parametric resonance can lead to dangerously large rolling motions, endangering the ship, cargo and crew. The QR-factorization method for calculating (LCEs) Lyapunov Characteristic Exponents was introduced; parametric resonance stability of ships in longitudinal waves was then analyzed using LCEs. Then the safe and unsafe regions of target ships were then identified. The results showed that this method can be used to analyze ship stability and to accurately identify safe and unsafe operating conditions for a ship in longitudinal waves.     

活塞蓄能器式管路阻尼器的理论与试验研究

It can be beneficial to reduce vibrations in shipboard piping, so the authors designed a new kind of piping damper with a plunger-type accumulator. Special requirements for the piping damper included low impact displacement, low speed, as well as an appropriate locking speed. Inside the damper, a plunger-type accumulator was installed and on the outside of the piston rod, a tube with exposed corrugations was added. Between the piston and the cylinder, a clearance seal was added. Using mathematical modeling, the effects of the dynamic performance of the damper’s impact displacement on vibrations were observed. Changes to the clearance between the piston and the cylinder, the stiffness of the spring in the accumulator, the throttle valve size, and locking speed resistance of the damper were respectively simulated and studied. Based on the results of the simulation, dampers with optimal parameters were developed and tested with different accumulator spring stiffnesses and different throttles. The simulation and experimental results showed that parameters such as seal clearance between piston and cylinder, accumulator spring stiffness and throttle parameters have significant effects on the damper’s impact displacement, low speed resistance and locking speed.     

水下潜器改进S面控制及控制系统仿真

S surface controllers have been proven to provide effective motion control for an autonomous underwater vehicle (AUV). However, it is difficult to adjust their control parameters manually. Choosing the optimum parameters for the controller of a particular AUV is a significant challenge. To automate the process, a modified particle swarm optimization (MPSO) algorithm was proposed. It was based on immune theory, and used a nonlinear regression strategy for inertia weight to optimize AUV control parameters. A semi-physical simulation system for the AUV was developed as a platform to verify the proposed control method, and its structure was considered. The simulation results indicated that the semi-physical simulation platform was helpful, the optimization algorithm has good local and global searching abilities, and the method can be reliably used for an AUV.     

固体氧化物燃料电池船舶动力系统的动态仿真

Solid oxide fuel cell (SOFC) has been identified as an effective and clean alternative choice for marine power system. This paper emphasizes on the dynamic modeling of SOFC power system and its performance based upon marine operating circumstance. A SOFC power system model has been provided considering thermodynamic and electrochemical reaction mechanism. Subcomponents of lithium ion battery, power conditioning unit, stack structure and controller are integrated in the model. The dynamic response of the system is identified according to the inertia of its subcomponent and controller. Validation of the whole system simulation at steady state and transit period are presented, concerning the effects of thermo inertia, control strategy and seagoing environment. The simulation results show reasonable accuracy compare with lab test. The models can be used to predict performance of a SOFC power system and identify the system response when part of the component parameter is adjusted.     

一种基于模型的水声弱信号检测方法

Detection of weak underwater signals is an area of general interest in marine engineering. A weak signal detection scheme was developed; it combined nonlinear dynamical reconstruction techniques, radial basis function (RBF) neural networks and an extended Kalman filter (EKF). In this method chaos theory was used to model background noise. Noise was predicted by phase space reconstruction techniques and RBF neural networks in a synergistic manner. In the absence of a signal, prediction error stayed low and became relatively large when the input contained a signal. EKF was used to improve the convergence rate of the RBF neural network. Application of the scheme to different experimental data sets showed that the algorithm can detect signals hidden in strong noise even when the signal-to-noise ratio (SNR) is less than −40d B.     

船体表面矩形块优化敷设设计(英文)

Rectangular tiles can be laid on a ship’s hull for protection, but the sides of the tiles must be adjusted so adjacent tiles will conform to the curvature of the hull. A method for laying tiles along a reference line was proposed, and an allowable range of displacement for the four vertices of the tile was determined. Deformations of each tile on a specific reference line were then obtained. It was found that the least deformation was required when the tiles were laid parallel to a line with the least curvature. After calculating the mean curvature on the surface, the surface was divided into three layout areas. A set of discrete points following the least deformation of the principal curvatures was obtained. A NURBS interpolation curve was then plotted as the reference line for laying tiles. The optimum size of the tiles was obtained, given the allowable maximum deformation condition. This minimized the number of bolts and the amount of stuffing. A typical aft hull section was selected and divided into three layout areas based on the distribution of curvature. The optimum sizes of rectangular tiles were obtained for every layout area and they were then laid on the surface. In this way the layout of the rectangular tiles could be plotted.