Assessing a maritime service website prototype in a ship bridge simulator: navigators’ experiences and perceptions of novel e-Navigation solutions

The aim of this study was to assess proof of concept and usability of a maritime service website prototype in a full-mission ship bridge simulator through Swedish mariners’ experiences and perceptions. This test was part of the European Commission’s EfficienSea2 project for e-navigation. The prototype was intended as an aid to existing standard systems and methodologies for planning, executing and monitoring voyages. The study began with 5 days of simulator trials focused on today’s standard practices. This served as a baseline to compare to subsequent 4 days of simulator trials testing the prototype. For data collection, observations, video footage, interviews, and eye tracking were used. Data analysis included breaking apart the qualitative data to capture the perceptions of the participants, and a preliminary analysis of eye-tracking data as a complement. The results suggested that the prototype could be more suitable for a route planning stage, that the participants were familiar with similar existing solutions from other manufacturers, and that the contents of the tool would be most beneficial if integrated within the Electronic Chart Display and Information Systems (ECDIS). There is a pressing need for the novel solutions to be user needs-driven, integrated with the existing technologies, and standardized across the domain, and these processes must go hand-in-hand with accounting for all involved stakeholders, procedures, regulations, and training, as this will alter the course of shipping.     

Comparing operator and users costs of light rail, heavy rail and bus rapid transit over a radial public transport network

A model to compare three alternative forms of public transport - light rail, heavy rail and bus rapid transit - is developed for an urban network with radial lines emanating from the borders to the city centre. The theoretical framework assumes an operation aimed at minimising the total cost associated with public transport service provision, which encompasses both operator and users costs. The decision variables are the number of lines (network density) and the frequency per period for each mode. This approach has no prejudices a priori in respect of whether a specified delivery scenario is aligned with existing modal reputation. Rather, we establish the conditions under which a specific transit mode should be preferred to another in terms of the operator (supply) and user (demand) side offerings. The model is applied using data from Australian cities, suggesting that in most of the scenarios analysed a high standard bus service is the most cost-effective mode, because it provides lower operator costs (infrastructure, rolling stock and operating cost), access time costs (due to a larger number of lines) and waiting time cost (due to larger frequencies of operation). A rail mode, such as light rail or heavy rail, may have a lower total cost only if it is able to run faster than bus rapid transit, and the difference in speed is enough to outweigh the bus advantage on operator cost and access and waiting times.     

Damage detection in offshore structures using neural networks

This paper discusses the damage detection in offshore jacket platforms subjected to random loads using a combined method of random decrement signature and neural networks. The random decrement technique is used to extract the free decay of the structure from its online response while the structure is in service. The free decay and its time derivative are used as input for a neural network. The output of the neural network is used as an index for damage detection. It has been shown that function N is effective in damage detection in the members of an offshore structure. Experimental studies conducted on a reduced model for a real jacket structure with geometrical scale of 1:30 are used. The applied loads were random loads. Two different load spectra were used: White noise, and Pierson-Moskowitz.     

Altimeter assimilation in the OCCAM global model: Part I: A twin experiment

An altimeter data assimilation scheme has been tested in the OCCAM (Ocean Circulation and Climate Advanced Modelling) global 1/4°, 36-level model using a twin experiment format. The Cooper and Haines displacement scheme is used. The method works well in most regions and depths. Currents and densities in the top 1000 m generally improve by over 50–70% after 5 months of sea level assimilation every 15 days. Below 1000 m, an error reduction of up to 50% is achieved. The errors remain low during a further 60-day run without assimilation. Diagnostics for the North Atlantic, the Tropical Pacific and the Antarctic Circumpolar Current are shown alongside the global averages.The main problems encountered were in weakly stratified regions of the Antarctic and Arctic seas. A scale selective filter is developed to avoid assimilating scales much larger than the local deformation radius, and this avoids the adverse assimilation effects in the southern oceans. A companion paper uses this scheme to assimilate TOPEX and ERS-1 altimeter maps.     

An improved formulation for bulk cargo ship scheduling with a single loading port

This paper presents an improved, significantly more efficient formulation of an existing model for bulk cargo or semi-bulk cargo ship scheduling problems with a single loading port. The original model, published by Ronen in 1986, was formulated as a non-linear, mixed integer program. In this work, the authors were able to re-formulate it into a linear one, by eliminating all the non-linearities of the original model. In addition, this model has far fewer integer variables than the original one. A numerical example has been given to illustrate the elimination of non-linearities and how 40 integer variables, in the original model, are reduced to just eight. This example also shows that this model is better at finding exact optimal solutions than the original one. It is also worth observing that the resulting model is a generalization of the ‘capacitated facility location problem’.     

Impact of phytoplankton community size on a linked global ocean optical and ecosystem model

We isolated the effect phytoplankton cell size has on varying remote sensing reflectance spectra (R_rs(λ)) in the presence of optically active constituents by using optical and radiative transfer models linked in an offline diagnostic calculation to a global biogeochemical/ecosystem/circulation model with explicit phytoplankton size classes. Two case studies were carried out, each with several scenarios to isolate the effects of chlorophyll concentration, phytoplankton cell size, and size-varying phytoplankton absorption on R_rs(λ). The goal of the study was to determine the relative contribution of phytoplankton cell size and chlorophyll to overall R_rs(λ) and to understand where a standard band ratio algorithm (OC4) may under/overestimate chlorophyll due to R_rs(λ) being significantly affected by phytoplankton size. Phytoplankton cell size was found to contribute secondarily to R_rs(λ) variability and to amplify or dampen the seasonal cycle in R_rs(λ), driven by chlorophyll. Size and chlorophyll were found to change in phase at low to mid-latitudes, but were anti-correlated or poorly correlated at high latitudes. Phytoplankton size effects increased model calculated R_rs(443) in the subtropical ocean during local spring through early fall months in both hemispheres and decreased R_rs(443) in the Northern Hemisphere high latitude regions during local summer to fall months. This study attempts to tease apart when/where variability about the OC4 relationship may be associated with cell size variability. The OC4 algorithm may underestimate [Chl] when the fraction of microplankton is elevated, which occurs in the model simulations during local spring/summer months at high latitudes in both hemispheres.     

采用微气泡缩减高速船拖曳阻力(英文)

Ship hull form of the underwater area strongly influences the resistance of the ship.The major factor in ship resistance is skin friction resistance.Bulbous bows,polymer paint,water repellent paint(highly water-repellent wall),air injection,and specific roughness have been used by researchers as an attempt to obtain the resistance reduction and operation efficiency of ships.Micro-bubble injection is a promising technique for lowering frictional resistance.The injected air bubbles are supposed to somehow modify the energy inside the turbulent boundary layer and thereby lower the skin friction.The purpose of this study was to identify the effect of injected micro bubbles on a navy fast patrol boat(FPB) 57 m type model with the following main dimensions:L=2 450 mm,B=400 mm,and T=190 mm.The influence of the location of micro bubble injection and bubble velocity was also investigated.The ship model was pulled by an electric motor whose speed could be varied and adjusted.The ship model resistance was precisely measured by a load cell transducer.Comparison of ship resistance with and without micro-bubble injection was shown on a graph as a function of the drag coefficient and Froude number.It was shown that micro bubble injection behind the mid-ship is the best location to achieve the most effective drag reduction,and the drag reduction caused by the micro-bubbles can reach 6%-9%.     

Experimental Investigation of TARMAX Model for Modeling of Hydrodynamic Forces on Cylinder-like Structures

A new approach that models lift and drag hydrodynamic force signals operating over cylindrical structures was developed and validated. This approach is based on stochastic auto regressive moving average with exogenous (ARMAX) input and its time-varying form, TARMAX. Model structure selection and parameter estimation were discussed while considering the validation stage. In this paper, the cylindrical structure was considered as a dynamic system with an incoming water wave and resulting forces as the input a...     

Transport infrastructure provision and operations: Why should governments choose private–public partnership?

Recent transport sector liberalisation, as well as global economic crisis, is favouring the implementation of transport infrastructure projects through Public–Private Partnerships (PPP). However, there is a debate as to whether PPP schemes are a better option than conventional procurement. To this end, an evaluation framework is proposed, to assess which of these two alternative schemes for transport projects financing is preferable for the public. The proposed framework is complimentary to the Value for Money (VfM) approach and is based on a Multi Criteria Analysis (MCA). The first step is the estimation of the Public Sector Comparator (PSC) for the case of conventional procurement, dealing with construction, maintenance and operation costs revenues, as well as any costs associated with risks undertaken by the public. As for the PPP case, it includes any payments by the public sector and related risks costs. The MCA is then applied only if the PPP is found preferable for the public sector. The latter considers additional impacts, including among others the social attributes of a particular scheme, job creation, environmental impacts and safety and security aspects. The proposed framework was applied to a pilot Bus Rapid Transit (BRT) corridor infrastructure project in the city of Indore, India, in order to demonstrate its validity. The framework and its application could provide useful guidance when considering PPP for a transport project, since it demonstrates in a transparent way the society's attitude towards this project, something that is critical to its acceptance.     

Regulation,trust and contractual incentives around transport contracts – Is there anything bus operators can learn from public air service contracts?

This paper compares recent experiences in contract negotiation and subsequent commitment in public air services with the bus industry. The heart of the paper is a survey of European and Australian regional airlines, which we mirror with revealed experiences of bus operators. We aim to identify a number of elements in the contracting regimes that have exposed ambiguity and significant gaps in what the principal (e.g., transport department) expected, and what the agent (airline or bus operator) believed they were obliged to deliver. Ultimately airline and bus services are similar in that public authorities procure transport services that are desirable for the society but would be unprofitable without government involvement. In both sectors (theoretically fairly similar) public transport contracts are used, and those usually include obligations and performance measurements. In terms of similarities, one of the surveyed contract details that had a perceived high clarity in both industries was “payment procedures” and amongst those with rather poor clarity was also in both industries “incentives to improve performance and grow patronage”. We also show differences between regional air services and bus operations with regard to performance measurement and pre-specified obligations. Because of the strong safety culture around air services we find that regulation and trusting partnerships are even more important to aviation than to the bus sector. Because of the high level of trust but also because of simpler and more complete contracts in aviation, there is much less (re-)negotiation going on compared to the bus operations.