An investigation of the performance of an electronic in-line pump system for diesel engines

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump （EIP） system, designed to meet China＇s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.     

Creep Life Prediction of Alloy 718 for Automotive Engine Materials

This study was carried out to investigate the creep life at the high temperature of the Alloy 718 for automotive engine components using the initial strain parameter method (ISPM). Creep tests have performed at elevated temperatures in the range of 550 oC to 700 oC in this work. We also carried out constant stress creep tests. The initial strains were measured during 1 minute after loading. Both the creep stress and rupture time depend on the initial strain. We calculated the creep life of Alloy 718 by using the creep life prediction equations obtained from the ISPM. Then, we compared the creep life predicted by the ISPM to the Larson-Miller parameter (LMP). The experimental rupture time and the calculated rupture time by using the ISPM agreed with a confidence level of 95 %. The creep life predicted by using the ISPM was in very good agreement with the creep life predicted using the LMP method.     

Mathematical model validated by a crash test for studying the occupant’s kinematics and dynamics in a cars’ frontal collision

The aim of the paper was to determine the kinematic parameters that influence the occupant injury risk through a mathematical model. The developed model is a 2D model composed of 4 bodies (2 vehicles, thorax and head). The head and thorax are interconnected with a rotation joint and a torsion spring meant to stiffen the relative movement between the bodies. The thorax is connected with the vehicle body by a linear spring meant to simulate the seatbelt stiffness. The model was solved using Lagrange principle and the validation of the model was made through a crash test performed using the same initial conditions and comparing the obtained values of the displacement, velocity and acceleration parameters with the ones obtained with the mathematical model. The head and torso were chosen due to the fact that they are the common parts of the body that get injured, especially the head with the change of 80 % to cause fatal injury in car’s frontal collision. Once the model was validated, the stiffness of the seatbelt was modified in order to determine the behavior of the occupant in case of car frontal collisions. When the seatbelt stiffness was reduced, the occupant displacement and velocity increased, while by increasing the stiffness, these parameters decreased. The values of the developed model presented a high degree of similarity with the results obtained from the crash test with an error of 10 %. This model can be used by engineers to easily asses the occupant injury risk in case of vehicle frontal collisions.     

Flexural gravity wave generation by initial disturbances in the presence of current

The effect of uniform current on the generation of flexural gravity waves resulting from initial disturbances at a point was analyzed in two dimensions. The problem was formulated as an initial boundary value problem under the assumptions of the linearized theory of water waves. By direct application of the Laplace transform and then the Fourier transform, explicit expressions for the velocity potential and free surface elevation were obtained in integral forms; these were evaluated asymptotically for large distances and times by the application of the method of the stationary phase to obtain the far field behavior of the surface elevations in specific cases. Simple numerical computations were performed to illustrate the effect of uniform current on the surface elevation, wavelength, phase velocity, and group velocity of the flexural gravity waves and on the far field behavior of the progressive waves in two different cases, namely, when there is an initial depression concentrated at the origin and an initial impulse concentrated at the origin.     

Design optimization of a torpedo shell structure

An optimized methodology to design a more robust torpedo shell is proposed. The method has taken into account reliability requirements and controllable and uncontrollable factors such as geometry, load, material properties, manufacturing processes, installation, etc. as well as human and environmental factors. The result is a more realistic shell design. Our reliability optimization design model was developed based on sensitivity analysis. Details of the design model are given in this paper. An example of a torpedo shell design based on this model is given and demonstrates that the method produces designs that are more effective and reliable than traditional torpedo shell designs. This method can be used for other torpedo system designs.     

Sensitivity analysis of the probabilistic damage stability regulations for RoPax vessels

In the light of the newly developed harmonised probabilistic damage stability regulations, set to come into force in 2009, this article presents a systematic and thorough analysis of the sensitivity of the Attained Subdivision Index with reference to a wide range of related design parameters. The sensitivity of the probabilistic regulations was investigated for a typical large RoPax vessel, with variation of parameters, such as the number, positioning and local optimisation of transverse bulkheads; the presence and position of longitudinal bulkheads below the main vehicle deck; the presence of side casings; and the height of the main deck and double bottom. The effects of water on deck and of operational parameters (draught, centre of gravity and trim) were also investigated. The results of the study, presented in graphical form, can provide valuable assistance to the designer when determining subdivision characteristics at the very early stage of the design process, resulting in optimal, efficient and safe ships.     

Fast direction of arrival algorithm based on vector-sensor arrays using wideband sources

An acoustic vector sensor （AVS） can capture more information than a conventional acoustic pressure sensor （APS）. As a result, more output channels are required when multiple AVS are formed into arrays, making processing the data stream computationally intense. This paper proposes a new algorithm based on the propagator method for wideband coherent sources that eliminates eigen-decomposition in order to reduce the computational burden. Data from simulations and lake trials showed that the new algorithm is valid： it resolves coherent sources, breaks left/right ambiguity, and allows inter element spacing to exceed a half-wavelength.     

Transforaminal lumbar interbody fusion for traumatic lumbar spondylolisthesis

To evaluate the clinical outcome, effectiveness and safety of the surgical management of traumatic lumbar spondylolisthesis with transforaminal lumbar interbody fusion (TLIF) with short segmental instrumentation fixation. A retrospective review of a consecutive series of 24 patients with traumatic lumbar spondylolisthesis treated with TLIF procedure was carried out. Intraoperative spinal cord monitoring was used to confirm the peripheral neural function intact during the reduction of the spondylolisthesis. Preoperative clinical and radiographic evaluation of all cases were originally collected prospectively. Data regarding blood loss, operative time, duration of hospital stay, radiographic fusion, instrumentation failure and clinical result were collected and observed at regular follow-up periods. All patients were engaged in high-energy accidents in the lower back and 16 patients had concomitant injuries. The mean operative time was 124 min, mean blood loss was 350 mL, and mean hospital stay was 6.5 days. There were no complications such as incision infection, cerebrospinal fluide (CSF) leakage and nerve root injury and so on. All patients demonstrated a solid lumbar interbody fusion within 4 months, and no evidence of spondylolisthesis correction loss, instrumentation failure and loosing. They all were completely asymptomatic, with normal neurologic findings, and had resumed their previous level of physical activities on the final follow-up. Meticulous clinical examination and careful imaging assessment could assist an early diagonosis in cases of traumatic lumbar spondylolisthesis. Performing open reduction and the TLIF procedure as soon as possible could restore segmental stability and painless function. The TLIF procedure was a safe, effective technique to treat traumatic lumbar spondylolisthesis.     

Face recognition via adaptive image combination

Dimension reduction and manifold learning are the two most popular feature extraction methods. The two methods focus on spatial locality as a guiding principle to find a low-dimensional basis for describing high-dimensional data, but no bases or features are more spatially localized than the original image pixels. So, adaptive image combination is presented to represent a class by a combined sample. The combined sample is a linear combination of original samples in the same class. Adaptive image combination (AIC) find the best combination coefficients by minimizing the intrapersonal distance and maximizing the interpersonal distance. Experimental results show that AIC is effective.     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.