6502站继电器采集故障原因分析

本文通过对6502站继电器采集故障原因进行分析，提出用增加复示继电器、缩短电缆长度或采集电缆单独敷设的方法，减少采集故障发生，确保列控中心识别进路信息采集的正确性。     

城市桥梁改造中的桥头交叉口典型问题及对策

早期桥梁建设中往往对桥头接线缺乏重视,运行至今,存在较多的道路交通问题。文章以福建省将乐县三华大桥桥头交叉口为分析对象,对旧桥改造中面临的一系列道路交通问题进行分析,并结合大桥实际情况,提出了相应的改善措施,供相关工程技术人员参考。     

Net tax incidence for urban public transit subsidies in New Zealand

This paper examines the impact of policy changes in the funding of New Zealand public transit modes.These changes, introduced in 1983, are evaluated in terms of the net incidence of public transit subsidy assistance, taking into account its source of funding and the income class of those commuters benefiting from the subsidy. The general conclusion is that the net incidence of subsidy assistance remains progressive (i.e., a transfer from high to low income commuters) following the introduction of shared funding on the predominant public transit modes (rail and bus), sourced from income tax (central government) and property tax (regional/local government). However, because of the predominance of medium to high income commuters on rail vis-a-vis bus and the traditional source of funding on these modes in terms of income tax (a progressive tax source) and property tax (a regressive tax source), the degree of progressivity previously associated with public transit subsidies has now substantially reduced.The analysis and opinions expressed in this paper are the responsibility of the author alone and do not purport to represent the views of the Ministry of Transport.     

Off-set crack propagation analysis under mixed mode loadings

An assessment was carried out herein to study the eccentricity of cracks subjected to mixed-mode loadings. Several loading locations relative to a central line were selected to induce mixed-mode loadings, which were computed using a finite element method. An adaptive meshing technique was adopted during the simulation of crack propagation to ensure the singularity of stress at the tip of the crack. The stress intensity failure criterion was used and programmed, and the node splitting technique was used when the stress intensity factor reached the fracture toughness of the material to simulate crack propagations. It was found that large variations in the stress intensity factor were observed when off-set cracks were used, and that K _II decreased when loading distance increased, but increased when the off-set crack distance was increased. Both crack eccentricity and loading distance played important roles in producing mixed-mode loading, compared to the influence of central cracks. Correction factors were introduced to modify the calculation of stress intensity factors under mixed-mode loadings. Simulations of crack propagation were also conducted to study the effects of crack eccentricities and loading distances. It was found that the crack length, the loading distance relative to the central crack and the crack eccentricity dominated calculations of the integrity of cracked structures.     

Sampling of alternatives for route choice modeling

This paper presents a new paradigm for choice set generation in the context of route choice model estimation. We assume that the choice sets contain all paths connecting each origin–destination pair. Although this is behaviorally questionable, we make this assumption in order to avoid bias in the econometric model. These sets are in general impossible to generate explicitly. Therefore, we propose an importance sampling approach to generate subsets of paths suitable for model estimation. Using only a subset of alternatives requires the path utilities to be corrected according to the sampling protocol in order to obtain unbiased parameter estimates. We derive such a sampling correction for the proposed algorithm.Estimating models based on samples of alternatives is straightforward for some types of models, in particular the multinomial logit (MNL) model. In order to apply MNL for route choice, the utilities should also be corrected to account for the correlation using, for instance, a path size (PS) formulation. We argue that the PS attribute should be computed based on the full choice set. Again, this is not feasible in general, and we propose a new version of the PS attribute derived from the sampling protocol, called Expanded PS.Numerical results based on synthetic data show that models including a sampling correction are remarkably better than the ones that do not. Moreover, the Expanded PS shows good results and outperforms models with the original PS formulation.     

Interval estimation in the calibration of certain trip distribution models

This paper argues for interval, rather than point, estimation when calibrating some variants of the trip distribution “gravity” models. Analytic expressions are derived for the approximate asymptotic covariances of least squares and maximum likelihood estimates of the parameters in the impedance function under a variety of conditions. A comparative numerical example, and an application using migration flows, are also presented.     

Model-based design of a variable nozzle turbocharger controller

Variable Nozzle Turbocharger (VNT) was invented to solve the problem of matching an ordinary turbocharger with an engine. VNT can harness exhaust energy more efficiently, enhance intake airflow response and reduce engine emissions, especially during transient operating conditions. The difficulty of VNT control lies in how to regulate the position of the nozzle at different engine working conditions. The control strategy designed in this study is a combination of a closed-loop feedback controller and an open-loop feed-forward controller. The gain-scheduled proportional-integral-derivative (PID) controller was implemented as the feedback controller to overcome the nonlinear characteristic. As it is difficult to tune the parameters of the gain-scheduled PID controller on an engine test bench, system identification was used to identify the plant model properties at different working points for a WP10 diesel engine on the test bench. The PID controller parameters were calculated based on the identified first-order-plus-dead-time (FOPDT) plant model. The joint simulation of the controller and the plant model was performed in Matlab/Simulink. The time-domain and frequency-domain performances of the entire system were evaluated. The designed VNT control system was verified with engine tests. The results indicated that the real boosting pressure traced the target boosting pressure well at different working conditions.     

Deflection test and transmission error measurement to identify hypoid gear whine noise

T-Hypoid gears are commonly used in rear-drive and 4WD (4 Wheel Drive) vehicle axles. Investigating their sensitivity to deflections is one of the most important aspects of their design and optimization procedures. Therefore, a deflection test was performed in this study in the actual gear mounting using completely processed gear. This test covered the full operating range of gear loads from “no load” to “peak load”. Under peak load, the contact pattern extended to the tooth boundaries without showing a concentration of the contact pattern at any point on the tooth surface. The transmission error was tested under an axle assembly triaxial-real-car-load condition.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

Minimum Efficient Scale (MES) and preferred scale of container terminals

The decision on the scale of a port terminal affects the terminal’s managerial, operational and competitive position in all the phases of its life. It also affects competition structures in the port in which the terminal is operating, and has a potential impact on other terminals. Port authorities and terminal operators need to know the scale of the terminal when engaging in concession agreements. In economic theory the scale of a plant/firm is typically defined in relation to the Minimum Efficient Scale (MES), the long-run output where the internal economies of scale are fully exploited. However, there are a number of theoretical and empirical indications that in ports the scale of a terminal is commonly guided by a combination of the MES and other determining factors. The “preferred” scale is the result of a complex interaction between the MES, the port governance framework and objectives, the market size and structure, technological change and operational considerations, physical and geographical limitations, and the business patterns of shipping lines. This study analyses the factors resulting in a preferred container terminal scale that in most of the times is different from the MES. The analysis of the technical, market-related and governance-related factors is supported by theoretical and empirical insights that illustrate the presence of a range of actual ”preferred” scales of terminal concessions that usually are different, below or above, MES.