When strike comes to town… anticipated and actual behavioural reactions to a one-day,pre-announced,complete rail strike in the Netherlands

We conducted secondary analysis on data collected among rail users, days before and after a national rail strike in the Netherlands. Our aim was to compare anticipated and actual behavioural reactions to the rail strike, investigate associations with traveller and trip characteristics, and perceived behavioural control and satisfaction with the chosen alternative. Forty-four percent of the people who had anticipated to travel by train on the day of the strike abandoned their trip, 24% switched to car as driver, 14% switched to another mode (as passenger), 18% stayed with the train and rescheduled the planned activity to another day. Almost half of people who had anticipated travelling by car expected to change behaviour as well. Multinomial logistic regression showed low preference for car among rail users. Considerable marginal effects were found for several variables, e.g.: young people and females were less likely to switch to car; short and middle distance trips were less likely abandoned or switched to another day; commute and business trips were more likely done by car, and business trips less likely cancelled. Despite high levels of perceived behavioural control and satisfaction with the chosen alternative, permanent modal shift as result of this strike is not expected.     

Ranking of factors contributing to higher performance in the ocean transportation industry: a multi-attribute utility theory approach

Ocean transportation has been mainly studied from an economic and strategic point of view. This paper adopts an operations management approach aiming at the identification of the value-adding attributes that characterize the ocean transportation industry. This is achieved by using Johansson et al.'s 1 four value metrics—service, quality, cost, time—which are used for the identification of the contribution that different factors make to the total created value. In this paper, multi-attribute utility theory (MAUT) has been used to measure and compare the value of different processes of various sectors of the ocean transportation industry. The application of MAUT methodology is illustrated with an example from the four sectors of the industry: liner, dry bulk, liquid bulk and specialized. Results suggest that there is strong emphasis placed by ocean transportation companies on quality and that there is differentiating importance put on service and cost by different sectors. Time is seen as the lowest value contributor by all four sectors of the surveyed companies.     

Do observations adequately resolve the natural variability of oceanic turbulence?

Especially in high Reynolds number, naturally-occurring flows, turbulence is a highly variable process. It is challenging to measure yet it is vital that we do so in order to quantify the internal transports of mass, nutrients, energy and momentum. Isolated turbulence profiles are difficult to interpret; systematic sampling and subsequent averaging are necessary. Confidence in our ability to properly sample turbulence arises from intergroup comparisons, comparisons with other methods to assess mixing coefficients and, most fundamentally, the constraints imposed by the governing fluid dynamics on both energy losses via viscous dissipation caused by turbulence and on the mixing that results from turbulence. Several examples in which fluid processes have been isolated from the full range of oceanic motions are reviewed in this light. These examples show how observationally-derived estimates of turbulence dissipation or mixing are consistent with larger scale constraints. The larger oceanographic problem of defining the full geographic variability of mixing remains.     

Recent sedimentary study of the shelf of the Basque country

The Northern Iberian margin of the Spanish Basque country (provinces of Gipuzkoa and Viscaia) is characterized by a narrow continental platform, which receives inputs of riverine particulate matter from the numerous riverine systems located within the Basque country. This particulate matter is subsequently deposited within the Bay of Biscay, and Gouf de Capbreton [Frouin, R., Fiuza, A.F.G., Ambar, I., Boyd, T.J., 1990. Observations of a poleward surface current off the coasts of Portugal and Spain during winter. Journal of Geophysical Research 95 (C1), 679–691]. The main goal of this study is to establish a map of the surface sediment distribution of the Basque continental shelf and more specifically to map the muddy patch located at the eastern side of that continental shelf.Three oceanographic cruises were conducted in 2003 and 2004. From these campaigns 340 surface samples, 12 short cores and 3 gravity cores have been collected over the mid and outer shelf from depths ranging between 50 m and 150 m deep. 3 seismic profiles were obtained across the shelf mud patch using a Sparker device.Sediment grain-size analyses were performed by the classical physical method of sieving and use of settling columns. The POC (Particular Organic Carbon) amounts in sediment and water samples were determined using the Strickland and Parsons' method [Strickland, J.D.H., Parsons, T.R., 1972. Determination of particulate carbon. In : A practical handbook of seawater analysis. Fisheries ResearchBoard of Canada, Ottawa, pp. 207−211] as adapted by Etcheber [Etcheber, H., 1981. Comparaison des diverses méthodes d'évaluation des teneurs en matières en suspension et en carbone organique particulaire des eaux marines du plateau continental aquitain. Journal de Recherche Océanographique VI (2), 37−42]. Radioisotopic measurements (²¹⁰Pb_exc) were made using a semi-planar germanium detector coupled to a multichannel analyser. Radiographical analysis was performed with an X-ray equipment (SCOPIX®) coupled with a radioscopy instrumentation and processing unit.Firstly, a detailed sedimentological map of this shelf has been produced and secondly, geophysical surveys have precisely mapped the geometry of the main mud patch on the continental shelf. In the mud patch itself the rates of sedimentation are between 0.13 and 0.50 cm yr^− 1. The maximum rate of sedimentation is located in the central mud patch, whereas the minimum rate of deposition occurs close to the rocky outcrops. These results seem to be in agreement with the estimation of the total thickness of the mud patch revealed by seismic profiles. The central part corresponds to the maximum thickness of 7 m.Interpretations of the associated oceanic current forcing factors (current direction, wave fetch and wind directional modes) relating to the identified sediment depositional zones are also undertaken.     

A method to assess demand growth vulnerability of travel times on road network links

Many national governments around the world have turned their recent focus to monitoring the actual reliability of their road networks. In parallel there have been major research efforts aimed at developing modelling approaches for predicting the potential vulnerability of such networks, and in forecasting the future impact of any mitigating actions. In practice—whether monitoring the past or planning for the future—a confounding factor may arise, namely the potential for systematic growth in demand over a period of years. As this growth occurs the networks will operate in a regime closer to capacity, in which they are more sensitive to any variation in flow or capacity. Such growth will be partially an explanation for trends observed in historic data, and it will have an impact in forecasting too, where we can interpret this as implying that the networks are vulnerable to demand growth. This fact is not reflected in current vulnerability methods which focus almost exclusively on vulnerability to loss in capacity. In the paper, a simple, moment-based method is developed to separate out this effect of demand growth on the distribution of travel times on a network link, the aim being to develop a simple, tractable, analytic method for medium-term planning applications. Thus the impact of demand growth on the mean, variance and skewness in travel times may be isolated. For given critical changes in these summary measures, we are thus able to identify what (location-specific) level of demand growth would cause these critical values to be exceeded, and this level is referred to as Demand Growth Reliability Vulnerability (DGRV). Computing the DGRV index for each link of a network also allows the planner to identify the most vulnerable locations, in terms of their ability to accommodate growth in demand. Numerical examples are used to illustrate the principles and computation of the DGRV measure.     

12毫米厚铝合金板的搅拌摩擦焊研究(英文)

Most of the investigations regarding friction stir welding(FSW)of aluminum alloy plates have been limited to about 5 to 6mm thick plates.In prior work conducted the various aspects concerning the process parameters and the FSW tool geometry were studied utilizing friction stir welding of 12 mm thick commercial grade aluminum alloy.Two different simple-tomanufacture tool geometries were used.The effect of varying welding parameters and dwell time of FSW tool on mechanical properties and weld quality was examined.It was observed that in order to achieve a defect free welding on such thick aluminum alloy plates,tool having trapezoidal pin geometry was suitable.Adequate tensile strength and ductility can be achieved utilizing a combination of high tool rotational speed of about 2000 r/min and low speed of welding around 28 mm/min.At very low and high dwell time the ductility of welded joints are reduced significantly.     

路段人行横道二次过街感应式信号控制算法设计

在现有感应控制二次过街系统中,道路两边以及安全岛按钮控制多为分开控制,没有相互协调,行人在安全岛等待时间过长易导致违章过街等问题。在一次过街感应控制算法基础上,结合二次过街相关理论、机动车与行人延误机理以及行人过街信号配时理论,提出"人行绿波"协调思路,对路段二次过街感应控制算法进行设计,并应用Vissim软件进行仿真验证,结果显示设计感应控制算法能有效地降低行人和机动车延误。     

Effects of split injection,oxygen enriched air and heavy EGR on soot emissions in a diesel engine

The effects of split injection, oxygen enriched air, and heavy exhaust gas recirculation (EGR) on soot emissions in a direct injection diesel engine were studied using the KIVA-3V code. When split injection is applied, the second injection of fuel into a cylinder results in two separate stoichiometric zones, which helps soot oxidation. As a result, soot emissions are decreased. When oxygen enriched air is applied together with split injection, a higher concentration of oxygen causes higher temperatures in the cylinder. The increase in temperature promotes the growth reaction of acetylene with soot. However, it does not improve acetylene formation during the second injection of fuel. As more acetylene is consumed in the growth reaction with soot, the concentration of acetylene in the cylinder is decreased, which leads to a decrease in soot formation and thus soot emissions. A combination of split injection, a high concentration of oxygen, and a high EGR ratio shows the best results in terms of diesel emissions. In this paper, the split injection scheme of 75.8.25, in which 75% of total fuel is injected in the first pulse, followed by 8°CA of dwell time, and 25% of fuel is injected in the second pulse, with an oxygen concentration of 23% in volume and an EGR ratio of 30% shows a 45% reduction in soot emissions, with the same NOx emissions as in single injection.     

Multi-response optimization of diesel engine performance parameters using thumba biodiesel-diesel blends by applying the Taguchi method and grey relational analysis

This paper presents an experimental study that involves an application of the Taguchi method and grey relational analysis to determine the optimum factor level to obtain optimum multiple-performance characteristics of a diesel engine run with different low-percentage thumba biodiesel-diesel blends. Four factors, namely, low-percentage thumba biodiesel-diesel blend, compression ratio, nozzle opening pressure and injection timing were each considered at three levels. An L₉ orthogonal array was used to collect data for various engine performance- and emission-related responses under different engine loads. The signal-to-noise (S/N) ratio and grey relational analysis were used for data analysis. The results of the study revealed that the combination of a blend consisting of 30% thumba biodiesel (B30), a compression ratio of 14, a nozzle opening pressure of 250 bar and an injection timing of 20° produces maximum multiple performance of a diesel engine with minimum multiple emissions from the engine.