Ground truthing sediment profile imagery with traditional benthic survey data along an established disturbance gradient

Macrobenthic surveys are an expensive, slow and labour intensive means to establish the health of benthic communities. Sediment profile imagery (SPI) is a means of rapid reconnaissance for monitoring large areas of the benthos. SPI has often been used to monitor gross anthropogenic disturbance. The aim of this study is to determine if SPI can be used as a tool to reliably map change in communities along natural estuarine gradients. Macrobenthic sampling was carried out at five stations along an established estuarine gradient. This faunal data was analysed using standard multivariate techniques and to ground truth a concurrent SPI survey. Faunal analysis showed that habitat quality in Inner Galway Bay was generally good, with some localised disturbance from the River Corrib and the sewage out flow exterior to the city dock. Four distinct groups were identified with a degree of overlap occurring between stations 3 and 4. While existing SPI indices mapped habitat quality in the same manner as the faunal data for end member stations, the level of distinction between the habitats of an intermediate staging was found to be poor. This lack of distinction amongst the stage 2 and 3 stations was overcome by developing a tailored index, the Galway Bay index of habitat quality (GBHQ). This index was derived from the 5 observed variables in the SPI data that were determined to best match the faunal distribution by permutative mantel testing. The 5 observed variables from the SPI data were the depth of the apparent redox potential discontinuity (aRPD), the depth of penetration by the prism, and the presence/absence of infauna, surface faecal pellet layer and biogenic mounding. The GBHQ was able to distinguish between the 5 stations to a greater extent than previously described indices, showing clearly the separate groupings defined by the faunal data. The index was tested on a follow up SPI survey and shown to be applicable in mapping a broader range of habitats in Galway Bay. Indices generated for localised mapping of estuarine gradients should be derived from observed features and be ground truthed using faunal data. Some aspects of the GBHQ should be generally applicable to fine grained boreal estuarine sediments (aRPD/penetration), while others may be of limited utility in other locations depending on the digging characteristics of the particular SPI camera, and local factors influencing the persistence of biogenic features in the profile. This derivation technique provides a simple way to optimise SPI to particular studies and localities.     

Hybrid Electric Drive for DDG-51 Class Destroyers

The first of the Arleigh Burke class destroyers is nearing its mid-life. This class of ships was designed during the late 1970s through the 1980s to meet the threats that were prevalent at that time. Since entering service in 1991, these ships have shown themselves to be extremely versatile and the class now consists of nearly 60 ships in service. Their combat systems have been continually upgraded and adapted to meet the new threats the United States faces today. However, in order to keep these platforms viable throughout the first half of the 21st century, their operating costs must be reduced. Manpower, maintenance, and fuel are three of the top operating cost drivers. Most surface combatants spend very little of their underway time operating at full speed or even close to that. Over 1/3 of their underway time is spent at 12 knots and under. This is less than half of their maximum speed and only a fraction of the maximum power owing to the cubic speed–power relationship. Although the existing mechanical drive system is reasonably efficient, the main gas turbines are extremely inefficient at these very low power levels. A shaft-mounted auxiliary electric propulsion system (EPS) can take advantage of excess capacity in the ship service generators to reduce the main engine operating hours. Enabling bi-directional power flow from this auxiliary electric drive will provide additional generation capacity for ship service loads at a modest additional cost. It also provides a "cross-connect" capability from one shaft to the other. This paper will explore one prospect for reducing the operating cost of the DDG-51 class of ships by installing an auxiliary EPS that would powered by the ship service electrical plant. This additional system would serve to reduce both underway fuel usage as well as maintenance on the gas turbine main engines by reducing the number of operating hours on each engine. We will examine the technology trade-offs in this ongoing study.     

Managing transportation during highway reconstruction: A recommended process

Major highway reconstruction can cause significant disruptions to existing travel patterns and economic activity. Reducing these impacts on travelers, shippers, businesses and residents requires that innovative and effective transportation management actions be developed and implemented. This paper reports the major findings and recommendations of a research study on managing transportation during highway, reconstruction. The primary objectives of the study were

Regional impacts of new transport infrastructure: a multisectoral potentials approach

This is the second of two background papers sponsored for the Symposium by the Administrative Commission for the north of the Netherlands. Its purpose is to provide an indication of the effects of the proposed high speed rail line between Amsterdam, Groningen and Hamburg on employment in the corridor. The authors first review the techniques of forecasting these effects discussed in the literature. The potentials approach is adopted for their analysis, the mathematics and underlying assumptions of which are presented. Finally, this model is run to provide an estimate of the impact on regional employment of three variants of the proposed rail line.     

Introduction: Habitual travel choice

In this introduction to the special issue on habitual travel choice, we provide a brief account of the role of habit in travel behaviour, discuss more generally what habitual choice is, and briefly review the issues addressed in the solicited papers. These issues include how habitual travel behaviour should be measured, how to model the learning process that makes travel choice habitual, and how to break and replace car-use habits.     

Habitual travel behaviour: Evidence from a six-week travel diary

This paper introduces different methods to measure similarity of travel behaviour addressing the question of how repetitious travel behaviour actually is. It compares empirical results of the different methods based on the data from a six-week travel diary. In general, the results show that the day-to-day behaviour is more variable if measured with trip-based methods instead of methods based on time budgets. Furthermore, it is confirmed that the similarity declines if the method captures more of the complexity of the travel pattern. It is also shown that travel behaviour is neither totally repetitious nor totally variable. Even for the whole observation period, it is demonstrated that two days always have some common elements. Additionally, it is found that the different methods yield the same pattern of variability for different types of day. Travel behaviour is clearly more stable on work days. Similar results for all methods are also obtained concerning the question of how long the minimum period of observation should be. All measures show that the period should not be less than two weeks if one aims at measuring variability.     

Train scheduling simulation that minimises operational conflicts due to service constraints

This paper presents an attempt made to facilitate re‐scheduling of trains to minimize operational delays and accommodate uniform headways for off peak sub urban services subject to resource constraints such as locomotive availability, poor track conditions and stations without siding facilities. The paper describes the computer simulation model designed to optimize train schedules on single‐track rail lines. Using this simulation program it is possible to plan and optimize timetables for railway networks with train runs within short time periods for both single track and double track conditions. The paper describes the capabilities of presenting the results of the simulation runs. These include the time‐distance graph, the network with train movements, dialog boxes with information about selected trains. The programme is capable of changing the starting point, departure time, train destinations and adding or deleting a stop etc. from the user interface. Four objects of array variables are used in the simulation process to keep train and station data. Two object arrays are used for the train movements in up and down directions. The stations' data are stored in the other two object arrays. One of these arrays of stations contains all the stations of the line while the other one contains only the stations with siding facilities. A case study that covers a 61 km long single‐track line with 14 stations is presented to highlight the model capabilities.     

Process Save Reduction by Macro Joint Approach: The Key to Real Time and Efficient Vehicle Simulation

Applying a non-linear model reduction method to the tire suspension system of road vehicles enables an automatic transfer of complex offline simulation vehicle models to a mathematical model, which fits the real time simulation requirements. The basic assumption, that high frequent inner suspension dynamics are not relevant to handling manoeuvres, converts the differential algebraic equation system (DAE) of suspensions with kinematical closed loops into pure elasto-kinematical linkage equations. The equations of motions can be represented as an ordinary differential equation system (ODE) and considerable simulation time reductions are obtained for the off-line simulation and real time simulation is enabled. This so-called macro joint approach is an alternative modelling method to the well-known look-up table representation of suspension kinematics but it keeps the parameterisation of the original suspension model and is suitable to parameterised real time MBS models. With a second step the dynamics, caused by compliance in the suspension bushings, are reduced to their quasi-static behaviour. The consideration of these quasi-elasticity has nearly no influence on the necessary simulation time. This contribution shows the theoretical background and demonstrates the advantage of the macro joint model reduction approach on a typical vehicle example.